ترغب بنشر مسار تعليمي؟ اضغط هنا

High-velocity micro-projectile impact testing

51   0   0.0 ( 0 )
 نشر من قبل David Veysset
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

High-velocity microparticle impacts are relevant to many fields from space exploration to additive manufacturing and can be used to help understand the physical and chemical behaviors of materials under extreme dynamic conditions. Recent advances in experimental techniques for single microparticle impacts have allowed fundamental investigations of dynamical responses of wide-ranging samples including soft materials, nano-composites, and metals, under strain rates up to 108 s-1. Here we review experimental methods for high-velocity impacts spanning 15 orders of magnitude in projectile mass and compare method performances. This review aims to present a comprehensive overview of high-velocity microparticle impact techniques to provide a reference for researchers in different materials testing fields and facilitate experimental design in dynamic testing for a wide range of impactor sizes, geometries, and velocities. Next, we review recent studies using the laser-induced particle impact test platform comprising target, projectile, and synergistic target-particle impact response, hence demonstrating the versatility of the method with applications in impact protection and additive manufacturing. We conclude by presenting the future perspectives in the field of high-velocity impact.



قيم البحث

اقرأ أيضاً

57 - Kang Xia , Haifei Zhan , Dean Hu 2018
The excellent mechanical properties of graphene have enabled it as appealing candidate in the field of impact protection or protective shield. By considering a monolayer graphene membrane, in this work, we assessed its deformation mechanisms under hy pervelocity impact (from 2 to 6 km/s), based on a serial of in silico studies. It is found that the cracks are formed preferentially in the zigzag directions which are consistent with that observed from tensile deformation. Specifically, the boundary condition is found to exert an obvious influence on the stress distribution and transmission during the impact process, which eventually influences the penetration energy and crack growth. For similar sample size, the circular shape graphene possesses the best impact resistance, followed by hexagonal graphene membrane. Moreover, it is found the failure shape of graphene membrane has a strong relationship with the initial kinetic energy of the projectile. The higher kinetic energy, the more number the cracks. This study provides a fundamental understanding of the deformation mechanisms of monolayer graphene under impact, which is crucial in order to facilitate their emerging future applications for impact protection, such as protective shield from orbital debris for spacecraft.
91 - S. Hudan 2005
The characteristics of intermediate mass fragments (IMFs: 3<=Z<=20) produced in mid-peripheral and central collisions are compared. We compare IMFs detected at mid-velocity with those evaporated from the excited projectile-like fragment (PLF*). On av erage, the IMFs produced at mid-velocity are larger in atomic number, exhibit broader transverse velocity distributions, and are more neutron-rich as compared to IMFs evaporated from the PLF*. In contrast, comparison of mid-velocity fragments associated with mid-peripheral and central collisions reveals that their characteristics are remarkably similar despite the difference in impact parameter. The characteristics of mid-velocity fragments are consistent with low-density formation of the fragments. Neutron deficient isotopes of even Z elements manifest higher kinetic energies than heavier isotopes of the same element for both PLF* and mid-velocity emission. This result may be due to the decay of long-lived excited states in the field of the emitting system.
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes we re smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differences gave rise to differing work hardening rates, influenced by varying secondary dendrite arm spacings, gamma-prime phase solvus temperatures and a topologically inverted gamma/gamma-prime microstructure. The gamma-prime precipitates possessed a characteristic `X morphology, resulting from the simultaneously active solute transport mechanisms of thermally favoured octodendritic growth and N-type rafting, indicating creep-type mechanisms were prevalent. High resolution-electron backscatter diffraction (HR-EBSD) characterisation reveals deformation patterning that follows the gamma/gamma-prime microstructure, with high geometrically necessary dislocation density fields localised to the gamma/gamma-prime interfaces; Orowan looping is evidently the mechanism that mediated plasticity. Examination of the residual elastic stresses indicated the `X gamma-prime precipitate morphology had significantly enhanced the deformation heterogeneity, resulting in stress states within the gamma channels that favour slip, and that encourage further growth of gamma-prime precipitate protrusions. The combination of such localised plasticity and residual stresses are considered to be critical in the formation of the recrystallisation defect in subsequent post-casting homogenisation heat treatments.
Integrating monolayers of two-dimensional semiconductors in planar, and potentially microstructured microcavities is challenging because of the few, available approaches to overgrow the monolayers without damaging them. Some strategies have been deve loped, but they either rely on complicated experimental settings, expensive technologies or compromise the available quality factors. As a result, high quality Fabry-Perot microcavities are not widely available to the community focusing on light-matter coupling with atomically thin materials. Here, we provide details on a recently developed technique to micro-mechanically assemble Fabry-Perot Microcavities. Our approach does not rely on difficult or expensive technologies, and yields device characteristics marking the state of the art in cavities with integrated atomically thin semiconductors.
This work is a theoretical study of the speed at which the material of an impacted target is ejected during the formation of an impact crater. Our model, starting from the first principle of thermodynamics, can describes the speed of the ejecta recur sing to considerations that include complex process in simple calculations. The fit of the model with observations shows that the many complex details implicit in an impact process could be included in some few parameters. Ejecta speed could be described independent of impactor parameters. The model is compared with subsonic and supersonic speed experiments showing coincidence in several cases. The model works with subsonic and supersonic impacts. We do not compare the model with hypersonic impacts (> 5 km/s), however, as the model derivation no depends on the impactor velocity it is likely that also work with this kind of impacts.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا