اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPupil plane wavefront sensing for extended and 3D sources
423
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the fields depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different position on the pupil and it is shown that the INGOT WFS is the equivalent of the Pyramid for a Laser Guide Star. Under these conditions one can imagine to use a Dark WFS approach to improve the SNR of such a WFS, or to use a corrected upward beam in order to achieve a better use of the LGS photons with respect to an ideal Shack-Hartmann WFS.
قيم البحث
اقرأ أيضاً
Focal plane wavefront sensing is an elegant solution for wavefront sensing since near-focal images of any source taken by a detector show distortions in the presence of aberrations. Non-Common Path Aberrations and the Low Wind Effect both have the ab
ility to limit the achievable contrast of the finest coronagraphs coupled with the best extreme adaptive optics systems. To correct for these aberrations, the Subaru Coronagraphic Extreme Adaptive Optics instrument hosts many focal plane wavefront sensors using detectors as close to the science detector as possible. We present seven of them and compare their implementation and efficiency on SCExAO. This work will be critical for wavefront sensing on next generation of extremely large telescopes that might present similar limitations.
In this article we show that the vector-Apodizing Phase Plate (vAPP) coronagraph can be designed such that the coronagraphic point spread functions (PSFs) can act as a wavefront sensor to measure and correct the (quasi-)static aberrations, without de
dicated wavefront sensing holograms nor modulation by the deformable mirror. The absolute wavefront retrieval is performed with a non-linear algorithm. The focal-plane wavefront sensing (FPWFS) performance of the vAPP and the algorithm are evaluated with numerical simulations, to test various photon and read noise levels, the sensitivity to the 100 lowest Zernike modes and the maximum wavefront error (WFE) that can be accurately estimated in one iteration. We apply these methods to the vAPP within SCExAO, first with the internal source and subsequently on-sky. In idealised simulations we show that for $10^7$ photons the root-mean-square (RMS) WFE can be reduced to $simlambda/1000$, which is 1 nm RMS in the context of the SCExAO system. We find that the maximum WFE that can be corrected in one iteration is $simlambda/8$ RMS or $sim$200 nm RMS (SCExAO). Furthermore, we demonstrate the SCExAO vAPP capabilities by measuring and controlling the lowest 30 Zernike modes with the internal source and on-sky. On-sky, we report a raw contrast improvement of a factor $sim$2 between 2 and 4 $lambda/D$ after 5 iterations of closed-loop correction. When artificially introducing 150 nm RMS WFE, the algorithm corrects it within 5 iterations of closed-loop operation. FPWFS with the vAPPs coronagraphic PSFs is a powerful technique since it integrates coronagraphy and wavefront sensing, eliminating the need for additional probes and thus resulting in a $100%$ science duty cycle and maximum throughput for the target.
The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the fra
mework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement capability. The first step of this analysis is to translate incoming wavefronts into the three pupil images, produced by the optical system. The intrinsic geometrical characteristics of the ingot optical element, designed to be coupled with the LGS elongated image, make the system conceptually different with respect to other pupil WFSs (like the Pyramid WFS, P-WFS) also in terms of the simulation technique to be selected, within the ones which can be found in literature. In this paper, we aim to report the considerations and derivations which led to the selection of a ray-tracing method for ingot pupil images simulation, and the geometrical assumptions and approach made to optimize the computing time.
High quality, repeatable point-spread functions are important for science cases like direct exoplanet imaging, high-precision astrometry, and high-resolution spectroscopy of exoplanets. For such demanding applications, the initial on-sky point-spread
function delivered by the adaptive optics system can require further optimization to correct unsensed static aberrations and calibration biases. We investigated using the Fast and Furious focal-plane wavefront sensing algorithm as a potential solution. This algorithm uses a simple model of the optical system and focal plane information to measure and correct the point-spread function phase, without using defocused images, meaning it can run concurrently with science. On-sky testing demonstrated significantly improved PSF quality in only a few iterations, with both narrow and broadband filters. These results suggest this algorithm is a useful path forward for creating and maintaining high-quality, repeatable on-sky adaptive optics point-spread functions.
Phase apodization coronagraphs are implemented in a pupil plane to create a dark hole in the science camera focal plane. They are successfully created as Apodizing Phase Plates (APPs) using classical optical manufacturing, and as vector-APPs using li
quid-crystal patterning with essentially achromatic performance. This type of coronagraph currently delivers excellent broadband contrast ($sim$10$^{-5}$) at small angular separations (few $lambda/D$) at ground-based telescopes, owing to their insensitivity to tip/tilt errors.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
