اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGrowth of Two-dimensional Compound Materials: Controllability, Material Quality, and Growth Mechanism
179
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
CONSPECTUS: Two-dimensional (2D) compound materials are promising materials for use in electronics, optoelectronics, flexible devices, etc. because they are ultrathin and cover a wide range of properties. Among all methods to prepare 2D materials, chemical vapor deposition (CVD) is promising because it produces materials with a high quality and reasonable cost. So far, much efforts have been made to produce 2D compound materials with large domain size, controllable number of layers, fast-growth rate, and high quality features, etc. However, due to the complicated growth mechanism like sublimation and diffusion processes of multiple precursors, maintaining the controllability, repeatability, and high quality of CVD grown 2D binary and ternary materials is still a big challenge, which prevents their widespread use. Here, taking 2D transition metal dichalcogenides (TMDCs) as examples, we review current progress and highlight some promising growth strategies for the growth of 2D compound materials. The key technology issues which affect the CVD process, including non-metal precursor, metal precursor, substrate engineering, temperature, and gas flow, are discussed. Also, methods in improving the quality of CVD-grown 2D materials and current understanding on their growth mechanism are highlighted. Finally, challenges and opportunities in this field are proposed. We believe this review will guide the future design of controllable CVD systems for the growth of 2D compound materials with good controllability and high quality, laying the foundations for their potential applications.
قيم البحث
اقرأ أيضاً
Ultrathin semiconductors present various novel electronic properties. The first experimental realized two-dimensional (2D) material is graphene. Searching 2D materials with heavy elements bring the attention to Si, Ge and Sn. 2D buckled Si-based sili
cene was realized by molecular beam epitaxy (MBE) growth1,2. Ge-based germanene was realized by mechanical exfoliation3. Sn-based stanene has its unique properties. Stanene and its derivatives can be 2D topological insulators (TI) with a very large band gap as proposed by first-principles calculations4, or can support enhanced thermoelectric performance5, topological superconductivity6 and the near-room-temperature quantum anomalous Hall (QAH) effect7. For the first time, in this work, we report a successful fabrication of 2D stanene by MBE. The atomic and electronic structures were determined by scanning tunneling microscopy (STM) and angle-resolved photoemission spectroscopy (ARPES) in combination with first-principles calculations. This work will stimulate the experimental study and exploring the future application of stanene.
Understanding the microscopic mechanism of chemical vapor deposition (CVD) growth of two-dimensional molybdenum disulfide (2D MoS2) is a fundamental issue towards the function-oriented controlled growth. In this work, we report results on revealing t
he growth kinetics of 2D MoS2 via capturing the nucleation seed, evolution morphology, edge structure and terminations at the atomic scale during CVD growth using the transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) studies. The direct growth of few- and mono-layer MoS2 onto graphene based TEM grids allow us to perform the subsequent TEM characterization without any solution-based transfer. Two forms of seeding centers are observed during characterizations: (i) Mo-oxysulfide (MoOxS2-y) nanoparticles either in multi-shelled fullerene-like structures or in compact nanocrystals for the growth of fewer-layer MoS2; (ii) Mo-S atomic clusters in case of monolayer MoS2. In particular, for the monolayer case, at the early stage growth, the morphology appears in irregular polygon shape comprised with two primary edge terminations: S-Mo Klein edge and Mo zigzag edge, approximately in equal numbers, while as the growth proceeds, the morphology further evolves into near-triangle shape in which Mo zigzag edge predominates. Results from density-functional theory calculations are also consistent with the inferred growth kinetics, and thus supportive to the growth mechanism we proposed. In general, the growth mechanisms found here should also be applicable in other 2D materials, such as MoSe2, WS2 and WSe2 etc.
We demonstrate a facile method to produce crystallographically textured, macroporous materials using a combination of modified ice templating and templated grain growth (TGG). The process is demonstrated on alumina and the lead-free piezoelectric mat
erial sodium potassium niobate. The method provides macroporous materials with aligned, lamellar ceramic walls which are made up of crystallographically aligned grains. Each method showed that the ceramic walls present a long-range order over the entire sample dimensions and have crystallographic texture as a result of the TGG process. We also present a modification of the March-Dollase equation to better characterize the overall texture of materials with textured but slightly misaligned walls. The controlled crystallographic and morphologic orientation at two different length scales demonstrated here can be the basis of multifunctional materials.
Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted much interest and shown promise in many applications. However, it is challenging to obtain uniform TMDCs with clean surfaces, because of the difficulties in controlling the
way the reactants are supplied to the reaction in the current chemical vapor deposition (CVD) growth process. Here, we report a new growth approach called dissolution-precipitation (DP) growth, where the metal sources are sealed inside glass substrates to control their feeding to the reaction. Noteworthy, the diffusion of metal source inside glass to its surface provides a uniform metal source on the glass surface, and restricts the TMDC growth to only a surface reaction while eliminates unwanted gas-phase reaction. This feature gives rise to highly-uniform monolayer TMDCs with a clean surface on centimeter-scale substrates. The DP growth works well for a large variety of TMDCs and their alloys, providing a solid foundation for the controlled growth of clean TMDCs by the fine control of the metal source.
The hybrid perovskite CH3NH3PbX3 (X= Cl, Br, I) is a promising material for developing novel optoelectronic devices. Owing to the intrinsic non-layer structure, it remains challenging to synthesize molecularly thin CH3NH3PbX3 with large size. Here, w
e report a low-cost and highly efficient fabrication route to obtain large-scale single-crystalline 2D CH3NH3PbX3 perovskites on a mica substrate via liquid epitaxy. The 2D perovskite is characterized as 8 nm in thickness and hundreds of micrometers in lateral size. First-principles calculations suggest the strong potassium-halogen interactions at the perovskite/mica interface lower the interface energy of perovskites, driving their fast in-plane growth. Spectroscopic investigations reveal 2D CH3NH3PbBr3 possess small exciton binding energy of 30 meV, allowing a superior visible-light photodetector with a photoresponsivity of 126 A/W and a bandwidth exceeded 80 kHz. These features demonstrate that liquid epitaxy is a bottom-up approach to fabricate the non-layer structured 2D perovskites, which offer a new material platform for the device applications and fundamental investigations.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
