ترغب بنشر مسار تعليمي؟ اضغط هنا

Obliquity dependence of the formation of the martian polar layered deposits

59   0   0.0 ( 0 )
 نشر من قبل Jeremy Emmett
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Mars polar layered deposits (PLD) are comprised of layers of varying dust-to-water ice volume mixing ratios (VMR) that may record astronomically-forced climatic variation over Mars recent orbital history. Retracing the formation of these layers by quantifying the sensitivity of deposition rates of polar material to astronomical forcing is critical for the interpretation of this record. Using a Mars global climate model (GCM), we investigate the sensitivity of annual polar water ice and dust surface deposition to various obliquities and surface water ice distributions at zero eccentricity, providing a reasonable characterization of the evolution of the PLD during recent low-eccentricity epochs. For obliquities between 15{deg} - 35{deg}, predicted net annual accumulation rates range from -1 to +14 mm/yr for water ice and from +0.003 to +0.3 mm/yr for dust. GCM-derived rates are ingested into an integration model that simulates polar accumulation of water ice and dust over 5 consecutive obliquity cycles (~700 kyrs) during a low eccentricity epoch. A subset of integration simulations predict combined accumulation of water ice and dust in the north at time averaged rates that are near the observationally-inferred value of 0.5 mm/yr. Three types of layers are produced per obliquity cycle: a ~30 m-thick dust-rich (~25% dust VMR) layer forms at high obliquity, a ~0.5 m-thick dust lag forms at low obliquity, and two ~10 m-thick dust-poor (~3%) layers form when obliquity is increasing/decreasing. The ~30 m-thick dust-rich layer is reminiscent of a ~30 m feature derived from visible imagery analysis the north PLD, while the ~0.5 m-thick dust lag is a factor of ~2 smaller than observed thin layers. Overall, this investigation provides further evidence for obliquity forcing in the PLD climate record, and demonstrates the importance of ice-on-dust nucleation in polar depositional processes.



قيم البحث

اقرأ أيضاً

The winter polar vortices on Mars are annular in terms of their potential vorticity (PV) structure, a phenomenon identified in observations, reanalysis and some numerical simulations. Some recent modeling studies have proposed that condensation of at mospheric carbon dioxide at the winter pole is a contributing factor to maintaining the annulus through the release of latent heat. Dust and topographic forcing are also known to be causes of internal and interannual variability in the polar vortices. However, coupling between these factors remains uncertain, and previous studies of their impact on vortex structure and variability have been largely limited to a single Martian global climate model (MGCM). Here, by further developing a novel MGCM, we decompose the relative roles of latent heat and dust as drivers for the variability and structure of the northern Martian polar vortex. We also consider how Martian topography modifies the driving response. By also analyzing a reanalysis dataset we show that there is significant dependence in the polar vortex structure and variability on the observations assimilated. In both model and reanalysis, high atmospheric dust loading (such as that seen during a global dust storm) can disrupt the vortex, cause the destruction of PV in the low-mid altitudes (> 0.1 hPa), and significantly reduce spatial and temporal vortex variability. Through our simulations, we find that the combination of dust and topography primarily drives the eddy activity throughout the Martian year, and that although latent heat release can produce an annular vortex, it has a relatively minor effect on vortex variability.
We study the 2018 Martian Global DustStorm (GDS 2018) over the Southern Polar Region using images obtained by the Visual Monitoring Camera (VMC) on board Mars Express during June and July 2018. Dust penetrated into the polar cap region but never cove red the cap completely, and its spatial distribution was nonhomogeneous and rapidly changing. However, we detected long but narrow aerosol curved arcs with a length of 2,000-3,000 km traversing part of the cap and crossing the terminator into the night side. Tracking discrete dust clouds allowed measurements of their motions that were towards the terminator with velocities up to 100 m/s. The images of the dust projected into the Martian limb show maximum altitudes of around 70 km but with large spatial and temporal variations. We discuss these results in the context of the predictions of a numerical model for dust storm scenario.
240 - T.M. Rogers , D.N.C. Lin 2013
We investigate tidal dissipation of obliquity in hot Jupiters. Assuming an initial random orientation of obliquity and parameters relevant to the observed population, the obliquity of hot Jupiters does not evolve to purely aligned systems. In fact, t he obliquity evolves to either prograde, retrograde or 90^{o} orbits where the torque due to tidal perturbations vanishes. This distribution is incompatible with observations which show that hot jupiters around cool stars are generally aligned. This calls into question the viability of tidal dissipation as the mechanism for obliquity alignment of hot Jupiters around cool stars.
We investigate the formation mechanism for the observed nearly polar aligned (perpendicular to the binary orbital plane) debris ring around the eccentric orbit binary 99 Herculis. An initially inclined nonpolar debris ring or disc will not remain fla t and will not evolve to a polar configuration, due to the effects of differential nodal precession that alter its flat structure. However, a gas disc with embedded well coupled solids around the eccentric binary may evolve to a polar configuration as a result of pressure forces that maintain the disc flatness and as a result of viscous dissipation that allows the disc to increase its tilt. Once the gas disc disperses, the debris disc is in a polar aligned state in which there is little precession. We use three-dimensional hydrodynamical simulations, linear theory, and particle dynamics to study the evolution of a misaligned circumbinary gas disc and explore the effects of the initial disc tilt, mass, and size. We find that for a wide range of parameter space, the polar alignment timescale is shorter than the lifetime of the gas disc. Using the observed level of alignment of 3 deg. from polar, we place an upper limit on the mass of the gas disc of about 0.014 M_sun at the time of gas dispersal. We conclude that the polar debris disc around 99 Her can be explained as the result of an initially moderately inclined gas disc with embedded solids. Such a disc may provide an environment for the formation of polar planets.
Potential microbial contamination of Martian moons, Phobos and Deimos, which can be brought about by transportation of Mars ejecta produced by meteoroid impacts on the Martian surface, has been comprehensively assessed in a statistical approach, base d on the most probable history of recent major gigantic meteoroid collisions on the Martian surface. This article is the first part of our study to assess potential microbial density in Mars ejecta departing from the Martian atmosphere, as a source of the second part where statistical analysis of microbial contamination probability is conducted. Potential microbial density on the Martian surface as the source of microorganisms was estimated by analogy to the terrestrial areas having the similar arid and cold environments, from which a probabilistic function was deduced as the asymptotic limit. Microbial survival rate during hypervelocity meteoroid collisions was estimated by numerical analysis of impact phenomena with and without taking internal friction and plastic deformation of the colliding meteoroid and the target ground into consideration. Trajectory calculations of departing ejecta through the Martian atmosphere were conducted with taking account of aerodynamic deceleration and heating by the aid of computational fluid dynamic analysis. It is found that Mars ejecta smaller than 0.03 m in diameter hardly reach the Phobos orbit due to aerodynamic deceleration, or mostly sterilized due to significant aerodynamic heating even though they can reach the Phobos orbit and beyond. Finally, the baseline dataset of microbial density in Mars ejecta departing for Martian moons has been presented for the second part of our study.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا