ترغب بنشر مسار تعليمي؟ اضغط هنا

New concepts in vector-Apodizing Phase Plate coronagraphy

233   0   0.0 ( 0 )
 نشر من قبل Steven Bos
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The vector-Apodizing Phase Plate (vAPP) is a pupil-plane coronagraph that manipulates phase to create dark holes in the stellar PSF. The phase is induced on the circular polarization states through the inherently achromatic geometric phase by spatially varying the fast axis orientation of a half-wave liquid-crystal layer. The two polarized PSFs can be separated, either by a quarter-wave plate (QWP) followed by a polarizing beamsplitter (PBS) for broadband operation, or a polarization sensitive grating (PSG) for narrowband or IFS operation. Here we present new vAPP concepts that lift the restrictions of previous designs and report on their performance. We demonstrated that the QWP+PBS combination puts tight tolerances on the components to prevent leakage of non-coronagraphic light into the dark-hole. We present a new broadband design using an innovative two-stage patterned liquid-crystal element system based on multi-color holography, alleviating the leakage problem and relaxing manufacturing tolerances. Furthermore, we have shown that focal-plane wavefront sensing (FPWFS) can be integrated into the vAPP by an asymmetric pupil. However, such vAPPs suffer from a reduced throughput and have only been demonstrated with a PSG in narrowband operation. We present advanced designs that maintain throughput and enable phase and amplitude wavefront sensing. We also present broadband vAPP FPWFS designs and outline a broadband FPWFS algorithm. Finally, previous dual-beam vAPP designs for sensitive polarimetry with one-sided dark holes were very complex. We show new dual-beam designs that significantly reduce the complexity.



قيم البحث

اقرأ أيضاً

In this article we show that the vector-Apodizing Phase Plate (vAPP) coronagraph can be designed such that the coronagraphic point spread functions (PSFs) can act as a wavefront sensor to measure and correct the (quasi-)static aberrations, without de dicated wavefront sensing holograms nor modulation by the deformable mirror. The absolute wavefront retrieval is performed with a non-linear algorithm. The focal-plane wavefront sensing (FPWFS) performance of the vAPP and the algorithm are evaluated with numerical simulations, to test various photon and read noise levels, the sensitivity to the 100 lowest Zernike modes and the maximum wavefront error (WFE) that can be accurately estimated in one iteration. We apply these methods to the vAPP within SCExAO, first with the internal source and subsequently on-sky. In idealised simulations we show that for $10^7$ photons the root-mean-square (RMS) WFE can be reduced to $simlambda/1000$, which is 1 nm RMS in the context of the SCExAO system. We find that the maximum WFE that can be corrected in one iteration is $simlambda/8$ RMS or $sim$200 nm RMS (SCExAO). Furthermore, we demonstrate the SCExAO vAPP capabilities by measuring and controlling the lowest 30 Zernike modes with the internal source and on-sky. On-sky, we report a raw contrast improvement of a factor $sim$2 between 2 and 4 $lambda/D$ after 5 iterations of closed-loop correction. When artificially introducing 150 nm RMS WFE, the algorithm corrects it within 5 iterations of closed-loop operation. FPWFS with the vAPPs coronagraphic PSFs is a powerful technique since it integrates coronagraphy and wavefront sensing, eliminating the need for additional probes and thus resulting in a $100%$ science duty cycle and maximum throughput for the target.
The apodizing phase plate (APP) is a solid-state pupil optic that clears out a D-shaped area next to the core of the ensuing PSF. To make the APP more efficient for high-contrast imaging, its bandwidth should be as large as possible, and the location of the D-shaped area should be easily swapped to the other side of the PSF. We present the design of a broadband APP that yields two PSFs that have the opposite sides cleared out. Both properties are enabled by a half-wave liquid crystal layer, for which the local fast axis orientation over the pupil is forced to follow the required phase structure. For each of the two circular polarization states, the required phase apodization is thus obtained, and, moreover, the PSFs after a quarter-wave plate and a polarizing beam-splitter are complementary due to the antisymmetric nature of the phase apodization. The device can be achromatized in the same way as half-wave plates of the Pancharatnam type or by layering self-aligning twisted liquid crystals to form a monolithic film called a multi-twist retarder. As the VAPP introduces a known phase diversity between the two PSFs, they may be used directly for wavefront sensing. By applying an additional quarter-wave plate in front, the device also acts as a regular polarizing beam-splitter, which therefore furnishes high-contrast polarimetric imaging. If the PSF core is not saturated, the polarimetric dual-beam correction can also be applied to polarized circumstellar structure. The prototype results show the viability of the vector-APP concept.
Over the last decade, the vector-apodizing phase plate (vAPP) coronagraph has been developed from concept to on-sky application in many high-contrast imaging systems on 8-m class telescopes. The vAPP is an geometric-phase patterned coronagraph that i s inherently broadband, and its manufacturing is enabled only by direct-write technology for liquid-crystal patterns. The vAPP generates two coronagraphic PSFs that cancel starlight on opposite sides of the point spread function (PSF) and have opposite circular polarization states. The efficiency, that is the amount of light in these PSFs, depends on the retardance offset from half-wave of the liquid-crystal retarder. Using different liquid-crystal recipes to tune the retardance, different vAPPs operate with high efficiencies ($>96%$) in the visible and thermal infrared (0.55 $mu$m to 5 $mu$m). Since 2015, seven vAPPs have been installed in a total of six different instruments, including Magellan/MagAO, Magellan/MagAO-X, Subaru/SCExAO, and LBT/LMIRcam. Using two integral field spectrographs installed on the latter two instruments, these vAPPs can provide low-resolution spectra (R$sim$30) between 1 $mu$m and 5 $mu$m. We review the design process, development, commissioning, on-sky performance, and first scientific results of all commissioned vAPPs. We report on the lessons learned and conclude with perspectives for future developments and applications.
The vector Apodizing Phase Plate (vAPP) is a class of pupil plane coronagraph that enables high-contrast imaging by modifying the Point Spread Function (PSF) to create a dark hole of deep flux suppression adjacent to the PSF core. Here, we recover th e known brown dwarf HR 2562 B using a vAPP coronagraph, in conjunction with the Magellan Adaptive Optics (MagAO) system, at a signal-to-noise of S/N = 3.04 in the lesser studied L-band regime. The data contained a mix of field and pupil-stabilised observations, hence we explored three different processing techniques to extract the companion, including Flipped Differential Imaging (FDI), a newly devised Principal Component Analysis (PCA)-based method for vAPP data. Despite the partial field-stabilisation, the companion is recovered sufficiently to measure a 3.94 $mu$m narrow-band contrast of (3.05$pm$1.00) $times$ 10$^{-4}$ ($Delta$m$_{3.94 {mu}m}$ = 8.79$pm$0.36 mag). Combined with archival GPI and SPHERE observations, our atmospheric modelling indicates a spectral type at the L/T transition with mass M = 29$pm$15 M$_{text{Jup}}$, consistent with literature results. However, effective temperature and surface gravity vary significantly depending on the wavebands considered (1200$leq$T$_{text{eff}}$(K)$leq$1700 and 4.0$leq$log(g)(dex)$leq$5.0), reflecting the challenges of modelling objects at the L/T transition. Observations between 2.4-3.2 $mu$m will be more effective in distinguishing cooler brown dwarfs due to the onset of absorption bands in this region. We explain that instrumental scattered light and wind-driven halo can be detrimental to FDI+PCA and thus must be sufficiently mitigated to use this processing technique. We thus demonstrate the potential of vAPP coronagraphs in the characterisation of high-contrast substellar companions, even in sub-optimal conditions, and provide new, complementary photometry of HR 2562 B.
The accumulation of aberrations along the optical path in a telescope produces distortions and speckles in the resulting images, limiting the performance of cameras at high angular resolution. It is important to achieve the highest possible sensitivi ty to faint sources such as planets, using both hardware and data analysis software. While analytic methods are efficient, real systems are better-modelled numerically, but such models with many parameters can be hard to understand, optimize and apply. Automatic differentiation software developed for machine learning now makes calculating derivatives with respect to aberrations straightforward for arbitrary optical systems. We apply this powerful new tool to enhance high-angular-resolution astronomical imaging. Self-calibrating observables such as the closure phase or bispectrum have been widely used in optical and radio astronomy to mitigate optical aberrations and achieve high-fidelity imagery. Kernel phases are a generalization of closure phases in the limit of small phase errors. Using automatic differentiation, we reproduce existing kernel phase theory within this framework and demonstrate an extension to the Lyot coronagraph, finding self-calibrating combinations of speckles which are resistant to phase noise, but only in the very high-wavefront-quality regime. As an illustrative example, we reanalyze Palomar adaptive optics observations of the binary alpha Ophiuchi, finding consistency between the new pipeline and the existing standard. We present a new Python package morphine that incorporates these ideas, with an interface similar to the popular package poppy, for optical simulation with automatic differentiation. These methods may be useful for designing improved astronomical optical systems by gradient descent.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا