اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدBottom Contact Metal Oxide Interface Modification Improving the Efficiency of Organic Light Emitting Diodes
81
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The performance of solution-processed organic light emitting diodes (OLEDs) is often limited by non-uniform contacts. In this work, we introduce Ni-containing solution-processed metal oxide (MO) interfacial layers inserted between indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) to improve the bottom electrode contact for OLEDs using the poly(p-phenylene vinylene) (PPV) derivative Super-Yellow (SY) as an emission layer. For ITO/Ni-containing MO/PEDOT:PSS bottom electrode structures we show enhanced wetting properties that result in an improved OLED device efficiency. Best performance is achieved using a Cu-Li co-doped spinel nickel cobaltite [(Cu-Li):NiCo2O4], for which the current efficiency and luminous efficacy of SY OLEDs increased, respectively, by 12% and 11% from the values obtained for standard devices without a Ni-containing MO interface modification between ITO and PEDOT:PSS. The enhanced performance was attributed to the improved morphology of PEDOT:PSS, which consequently increased the hole injection capability of the optimized ITO/(Cu-Li):NiCo2O4/PEDOT:PSS electrode.
قيم البحث
اقرأ أيضاً
Spin-spin interactions in organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) are important because radiative recombination is largely determined by triplet-to-singlet conversion, also called reverse intersy
stem crossing (RISC). Less obvious is the fact that the non-emissive triplet states are spin-polarized, e.g., by charge injection, and spin-selection rules prevent part of the triplet population from RISC. To explore the relationship between these two processes, we apply a two-frequency spin-resonance technique, which is essentially spectral hole burning, that directly probes electroluminescence. This allows us not only to independently confirm high spin-polarization, but also to distinguish between individual triplet exciplex states distributed in the OLED emissive layer. These states can be decoupled from the heterogeneous nuclear environment as a source of spin dephasing and can even be coherently manipulated on a spin-spin relaxation time scale T2* of 30 ns. Furthermore, we obtain the characteristic spin-lattice relaxation time T1 of the triplet exciplex in the range of 50 us, which is longer than the RISC time. We conclude that long spin relaxation time rather than RISC is an efficiency-limiting step for intermolecular donor:acceptor systems. Finding TADF emitters with faster spin relaxation will benefit this type of TADF OLEDs.
Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4-tert-butylbiphen
yl-4-yl)amino-4-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various doping levels of FVIN into Alq3, and show a remarkably stable external quantum efficiency of 1.5% for doping rates ranging from 5% up to 40%, which strongly relaxes the technological constraints on the doping accuracy. An efficiency of 1% is obtained for a pure undoped active region, along with deep red emission (x=0.6; y=0.35 CIE coordinates). A comparison of FVIN with the archetypal DCM dye is presented in an identical multilayer OLED structure.
The application of solution-processable graphene oxide (GO) as hole injection layer in organic light-emitting diodes (OLEDs) is demonstrated. High luminance of over 53,000 cd m-2 is obtained at only 10 V. The results will unlock a route of applying G
O in flexible OLEDs and other electrode applications.
Organic light-emitting diodes (OLEDs) have successfully entered the display market and continue to be attractive for many other applications. As state-of-the-art OLEDs can reach an internal quantum efficiency (IQE) of almost 100 %, light outcoupling
remains one of the major screws left to be turned. The fact that no superior outcoupling structure has been found underlines that further investigations are needed to understand their prospect. In this paper, we use two-dimensional titanium dioxide (2D TiO$_2$) block arrays as a model of an internal light outcoupling structure and investigate the influence of its geometrical parameters on achieving the highest external quantum efficiency (EQE) for OLEDs. The multivariable problem is evaluated with the visual assistance of scatter plots, which enables us to propose an optimal period range and block width-to-distance ratio. The highest EQE achieved is 45.2 % with internal and external structures. This work contributes to the highly desired prediction of ideal light outcoupling structures in the future.
The magnetoelectroluminescence of conjugated organic polymer films is widely accepted to arise from a polaron pair mechanism, but their magnetoconductance is less well understood. Here we derive a new relationship between the experimentally measurabl
e magnetoelectroluminescence and magnetoconductance and the theoretically calculable singlet yield of the polaron pair recombination reaction. This relationship is expected to be valid regardless of the mechanism of the magnetoconductance, provided the mobilities of the free polarons are independent of the applied magnetic field (i.e., provided one discounts the possibility of spin-dependent transport). We also discuss the semiclassical calculation of the singlet yield of the polaron pair recombination reaction for materials such as poly(2,5-dioctyloxy-paraphenylene vinylene) (DOO-PPV), the hyperfine fields in the polarons of which can be extracted from light-induced electron spin resonance measurements. The resulting theory is shown to give good agreement with experimental data for both normal (H-) and deuterated (D-) DOO-PPV over a wide range of magnetic field strengths once singlet-triplet dephasing is taken into account. Without this effect, which has not been included in any previous simulation of magnetoelectroluminescence, it is not possible to reproduce the experimental data for both isotopologues in a consistent fashion. Our results also indicate that the magnetoconductance of DOO-PPV cannot be solely due to the effect of the magnetic field on the dissociation of polaron pairs.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
