اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدLinear, nonlinear and transitional regimes of second mode instability
90
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The 2D second-mode is a potent instability in hypersonic boundary layers (HBLs). We study its linear and nonlinear evolution, followed by its role in transition and eventual breakdown of the HBL into a fully turbulent state. Linear stability theory (LST) is utilized to identify the second-mode wave through FS-synchronization, which is then recreated in linearly and nonlinearly forced 2D direct numerical simulations (DNSs). The nonlinear DNS shows saturation of the fundamental frequency, and the resulting superharmonics induce tightly braided ``rope-like patterns near the generalized inflection point (GIP). The instability exhibits a second region of growth constituted by the fundamental frequency, downstream of the primary envelope, which is absent in the linear scenario. Subsequent 3D DNS identifies this region to be crucial in amplifying oblique instabilities riding on the 2D second-mode ``rollers. This results in lambda vortices below the GIP, which are detached from the ``rollers in the inner boundary layer. Streamwise vortex-stretching results in a localized peak in length-scales inside the HBL, eventually forming haripin vortices. Spectral analyses track the transformation of harmonic peaks into a turbulent spectrum, and appearance of oblique modes at the fundamental frequency, which suggests that fundamental resonance is the most dominant mechanism of transition. Bispectrum reveals coupled nonlinear interactions between the fundamental and its superharmonics leading to spectral broadening, and traces of subharmonic resonance as well.
قيم البحث
اقرأ أيضاً
We present results of interface-resolved simulations of heat transfer in suspensions of finite-size neutrally-buoyant spherical particles for solid volume fractions up to 35% and bulk Reynolds numbers from 500 to 5600. An Immersed Boundary-Volume of
Fluid method is used to solve the energy equation in the fluid and solid phase. We relate the heat transfer to the regimes of particle motion previously identified, i.e. a viscous regime at low volume fractions and low Reynolds number, particle-laden turbulence at high Reynolds and moderate volume fraction and particulate regime at high volume fractions. We show that in the viscous dominated regime, the heat transfer is mainly due to thermal diffusion with enhancement due to the particle-induced fluctuations. In the turbulent-like regime, we observe the largest enhancement of the global heat transfer, dominated by the turbulent heat flux. In the particulate shear-thickening regime, however, the heat transfer enhancement decreases as mixing is quenched by the particle migration towards the channel core. As a result, a compact loosely-packed core region forms and the contribution of thermal diffusion to the total heat transfer becomes significant once again. The global heat transfer becomes, in these flows at volume fractions larger than 25%, lower than in single-phase turbulence.
Research in modern data-driven dynamical systems is typically focused on the three key challenges of high dimensionality, unknown dynamics, and nonlinearity. The dynamic mode decomposition (DMD) has emerged as a cornerstone for modeling high-dimensio
nal systems from data. However, the quality of the linear DMD model is known to be fragile with respect to strong nonlinearity, which contaminates the model estimate. In contrast, sparse identification of nonlinear dynamics (SINDy) learns fully nonlinear models, disambiguating the linear and nonlinear effects, but is restricted to low-dimensional systems. In this work, we present a kernel method that learns interpretable data-driven models for high-dimensional, nonlinear systems. Our method performs kernel regression on a sparse dictionary of samples that appreciably contribute to the underlying dynamics. We show that this kernel method efficiently handles high-dimensional data and is flexible enough to incorporate partial knowledge of system physics. It is possible to accurately recover the linear model contribution with this approach, disambiguating the effects of the implicitly defined nonlinear terms, resulting in a DMD-like model that is robust to strongly nonlinear dynamics. We demonstrate our approach on data from a wide range of nonlinear ordinary and partial differential equations that arise in the physical sciences. This framework can be used for many practical engineering tasks such as model order reduction, diagnostics, prediction, control, and discovery of governing laws.
A modal stability analysis shows that plane Poiseuille flow of an Oldroyd-B fluid becomes unstable to a `center mode with phase speed close to the maximum base-flow velocity, $U_{max}$. The governing dimensionless groups are the Reynolds number $Re =
rho U_{max} H/eta$, the elasticity number $E = lambda eta/(H^2rho)$, and the ratio of solvent to solution viscosity $eta_s/eta$; here, $lambda$ is the polymer relaxation time, $H$ is the channel half-width, and $rho$ is the fluid density. For experimentally relevant values (e.g., $E sim 0.1$ and $beta sim 0.9$), the predicted critical Reynolds number, $Re_c$, for the center-mode instability is around $200$, with the associated eigenmodes being spread out across the channel. In the asymptotic limit of $E(1 -beta) ll 1$, with $E$ fixed, corresponding to strongly elastic dilute polymer solutions, $Re_c propto (E(1-beta))^{-frac{3}{2}}$ and the critical wavenumber $k_c propto (E(1-beta))^{-frac{1}{2}}$. The unstable eigenmode in this limit is confined in a thin layer near the channel centerline. The above features are largely analogous to the center-mode instability in viscoelastic pipe flow (Garg et al., Phys. Rev. Lett., 121, 024502 (2018)), and suggest a universal linear mechanism underlying the onset of turbulence in both channel and pipe flows of suffciently elastic dilute polymer solutions.
Modeling realistic fluid and plasma flows is computationally intensive, motivating the use of reduced-order models for a variety of scientific and engineering tasks. However, it is challenging to characterize, much less guarantee, the global stabilit
y (i.e., long-time boundedness) of these models. The seminal work of Schlegel and Noack (JFM, 2015) provided a theorem outlining necessary and sufficient conditions to ensure global stability in systems with energy-preserving, quadratic nonlinearities, with the goal of evaluating the stability of projection-based models. In this work, we incorporate this theorem into modern data-driven models obtained via machine learning. First, we propose that this theorem should be a standard diagnostic for the stability of projection-based and data-driven models, examining the conditions under which it holds. Second, we illustrate how to modify the objective function in machine learning algorithms to promote globally stable models, with implications for the modeling of fluid and plasma flows. Specifically, we introduce a modified trapping SINDy algorithm based on the sparse identification of nonlinear dynamics (SINDy) method. This method enables the identification of models that, by construction, only produce bounded trajectories. The effectiveness and accuracy of this approach are demonstrated on a broad set of examples of varying model complexity and physical origin, including the vortex shedding in the wake of a circular cylinder.
Although the roll/streak structure is ubiquitous in pre-transitional wall-bounded shear flow, this structure is linearly stable if the idealization of laminar flow is made. Lacking an instability, the large transient growth of the roll/streak structu
re has been invoked to explain its appearance as resulting from chance occurrence in the free-stream turbulence (FST) of perturbations configured to optimally excite it. However, there is an alternative interpretation which is that FST interacts with the roll/streak structure to destabilize it. Statistical state dynamics (SSD) provides analysis methods for studying instabilities of this type which arise from interaction between the coherent and incoherent components of turbulence. Stochastic structural stability theory (S3T), which implements SSD in the form of a closure at second order, is used to analyze the SSD modes arising from interaction between the coherent streamwise invariant component and the incoherent FST component of turbulence. The least stable S3T mode is destabilized at a critical value of a parameter controlling FST intensity and a finite amplitude roll/streak structure arises from this instability through a bifurcation in this parameter. Although this bifurcation has analytical expression only in SSD, it is closely reflected in both the dynamically similar quasi-linear system, referred to as the restricted non-linear (RNL) system, and in DNS. S3T also predicts a second bifurcation at a higher value of the turbulent excitation parameter. This second bifurcation is shown to lead to transition to turbulence. Bifurcation from a finite amplitude roll/streak equilibrium provides a direct route to the turbulent state through the S3T roll/streak instability.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
