اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMeasuring HERAs primary beam in-situ: methodology and first results
159
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The central challenge in 21~cm cosmology is isolating the cosmological signal from bright foregrounds. Many separation techniques rely on the accurate knowledge of the sky and the instrumental response, including the antenna primary beam. For drift-scan telescopes such as the Hydrogen Epoch of Reionization Array citep[HERA, ][]{DeBoer2017} that do not move, primary beam characterization is particularly challenging because standard beam-calibration routines do not apply citep{Cornwell2005} and current techniques require accurate source catalogs at the telescope resolution. We present an extension of the method from citet{Pober2012} where they use beam symmetries to create a network of overlapping source tracks that break the degeneracy between source flux density and beam response and allow their simultaneous estimation. We fit the beam response of our instrument using early HERA observations and find that our results agree well with electromagnetic simulations down to a -20~dB level in power relative to peak gain for sources with high signal-to-noise ratio. In addition, we construct a source catalog with 90 sources down to a flux density of 1.4~Jy at 151~MHz.
قيم البحث
اقرأ أيضاً
We provide the first in situ measurements of antenna element (tile) beam shapes of the Murchison Widefield Array (MWA), a low radio-frequency interferometer and an SKA precursor. Most current MWA processing pipelines use an assumed beam shape, errors
in which can cause absolute and relative flux density errors, as well as polarisation leakage. This makes understanding the primary beam of paramount importance, especially for sensitive experiments such as a measurement of the 21 cm line from the epoch of reionisation (EoR). The calibration requirements for measuring the EoR 21 cm line are so extreme that tile to tile beam variations may affect our ability to make a detection. Measuring the primary beam shape from visibilities alone is challenging, as multiple instrumental, atmospheric, and astrophysical factors contribute to uncertainties in the data. Building on the methods of Neben et al. (2015), we tap directly into the receiving elements of the MWA before any digitisation or correlation of the signal. Using ORBCOMM satellite passes we are able to produce all-sky maps for 4 separate tiles in the XX polarisation. We find good agreement with the cutting-edge fully embedded element (FEE) model of Sokolowski et al. (2017), and observe that the MWA beamformers consistently recreate beam shapes to within ~1dB in the reliable areas of our beam maps. We also clearly observe the effects of a missing dipole from a tile in one of our beam maps, and show that the FEE model is able to reproduce this modified beam shape. We end by motivating and outlining additional onsite experiments to further constrain the primary beam behaviour.
The Global Meteor Network (GMN) utilizes highly sensitive low-cost CMOS video cameras which run open-source meteor detection software on Raspberry Pi computers. Currently, over 450 GMN cameras in 30 countries are deployed. The main goal of the networ
k is to provide long-term characterization of the radiants, flux, and size distribution of annual meteor showers and outbursts in the optical meteor mass range. The rapid 24-hour publication cycle the orbital data will enhance the public situational awareness of the near-Earth meteoroid environment. The GMN also aims to increase the number of instrumentally observed meteorite falls and the transparency of data reduction methods. A novel astrometry calibration method is presented which allows decoupling of the camera pointing from the distortion, and is used for frequent pointing calibrations through the night. Using wide-field cameras ($88^{circ}times48^{circ}$) with a limiting stellar magnitude of $+6.0 pm 0.5$ at 25 frames per second, over 220,000 precise meteoroid orbits were collected since December 2018 until June 2021. The median radiant precision of all computed trajectories is $0.47^{circ}$, $0.32^{circ}$ for $sim20%$ of meteors which were observed from 4+ stations, a precision sufficient to measure physical dispersions of meteor showers. All non-daytime annual established meteor showers were observed during that time, including five outbursts. An analysis of a meteorite-dropping fireball is presented which showed visible wake, fragmentation details, and several discernible fragments. It had spatial trajectory fit errors of only ~40 m, which translated into the estimated radiant and velocity errors of 3 arc minutes and tens of meters per second.
We describe the design, operation, and first results of a photometric calibration project, called DICE (Direct Illumination Calibration Experiment), aiming at achieving precise instrumental calibration of optical telescopes. The heart of DICE is an i
llumination device composed of 24 narrow-spectrum, high-intensity, light-emitting diodes (LED) chosen to cover the ultraviolet-to-near-infrared spectral range. It implements a point-like source placed at a finite distance from the telescope entrance pupil, yielding a flat field illumination that covers the entire field of view of the imager. The purpose of this system is to perform a lightweight routine monitoring of the imager passbands with a precision better than 5 per-mil on the relative passband normalisations and about 3{AA} on the filter cutoff positions. The light source is calibrated on a spectrophotometric bench. As our fundamental metrology standard, we use a photodiode calibrated at NIST. The radiant intensity of each beam is mapped, and spectra are measured for each LED. All measurements are conducted at temperatures ranging from 0{deg}C to 25{deg}C in order to study the temperature dependence of the system. The photometric and spectroscopic measurements are combined into a model that predicts the spectral intensity of the source as a function of temperature. We find that the calibration beams are stable at the $10^{-4}$ level -- after taking the slight temperature dependence of the LED emission properties into account. We show that the spectral intensity of the source can be characterised with a precision of 3{AA} in wavelength. In flux, we reach an accuracy of about 0.2-0.5% depending on how we understand the off-diagonal terms of the error budget affecting the calibration of the NIST photodiode. With a routine 60-mn calibration program, the apparatus is able to constrain the passbands at the targeted precision levels.
The Palomar Transient Factory (PTF) is a fully-automated, wide-field survey aimed at a systematic exploration of the optical transient sky. The transient survey is performed using a new 8.1 square degree camera installed on the 48-inch Samuel Oschin
telescope at Palomar Observatory; colors and light curves for detected transients are obtained with the automated Palomar 60-inch telescope. PTF uses eighty percent of the 1.2-m and fifty percent of the 1.5-m telescope time. With an exposure of 60-s the survey reaches a depth of approximately 21.3 in g and 20.6 in R (5 sigma, median seeing). Four major experiments are planned for the five-year project: 1) a 5-day cadence supernova search; 2) a rapid transient search with cadences between 90 seconds and 1 day; 3) a search for eclipsing binaries and transiting planets in Orion; and 4) a 3-pi sr deep H-alpha survey. PTF provides automatic, realtime transient classification and follow up, as well as a database including every source detected in each frame. This paper summarizes the PTF project, including several months of on-sky performance tests of the new survey camera, the observing plans and the data reduction strategy. We conclude by detailing the first 51 PTF optical transient detections, found in commissioning data.
The Rapid ASKAP Continuum Survey (RACS) is the first large-area survey to be conducted with the full 36-antenna Australian Square Kilometre Array Pathfinder (ASKAP) telescope. RACS will provide a shallow model of the ASKAP sky that will aid the calib
ration of future deep ASKAP surveys. RACS will cover the whole sky visible from the ASKAP site in Western Australia, and will cover the full ASKAP band of $700-1800$ MHz. The RACS images are generally deeper than the existing NRAO VLA Sky Survey (NVSS) and Sydney University Molonglo Sky Survey (SUMSS) radio surveys and have better spatial resolution. All RACS survey products will be public, including radio images (with $sim 15$ arcsecond resolution) and catalogues of about three million source components with spectral index and polarisation information. In this paper, we present a description of the RACS survey and the first data release of 903 images covering the sky south of declination $+41^circ$ made over a 288 MHz band centred at 887.5 MHz.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
