اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTracking System for Optical Mobile Communication and the Design Rules
164
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Free space optical communication has been applied in many scenarios because of its security, low cost and high rates. In such scenarios, a tracking system is necessary to ensure an acceptable signal power. Free space optical links were considered unable to support optical mobile communication when nodes are randomly moving at a high speed because existing tracking schemes fail to track the nodes accurately and rapidly. In this paper, we propose a novel tracking system exploiting multiple beacon laser sources. At the receiver, each beacon lasers power is measured to estimate the orientation of the target. Unlike existing schemes which drive servo motors multiple times based on consecutive measurements and feedback, our scheme can directly estimate the next optimal targeting shift for the servo motors based on a single measurement, allowing the tracking system to converge much faster. Closed-form outage probability expression is derived for the optical mobile communication system with ideal tracking, where pointing error and moving statistics are considered. To maintain sufficient average power and reduce the outage probability, the recommended size of a source spot is expressed in closed form as a function of the targets statistics of random moving, providing insights to the system design.
قيم البحث
اقرأ أيضاً
Millimetre wave (mmWave) beam tracking is a challenging task because tracking algorithms are required to provide consistent high accuracy with low probability of loss of track and minimal overhead. To meet these requirements, we propose in this paper
a new analog beam tracking framework namely Adaptive Tracking with Stochastic Control (ATSC). Under this framework, beam direction updates are made using a novel mechanism based on measurements taken from only two beam directions perturbed from the current data beam. To achieve high tracking accuracy and reliability, we provide a systematic approach to jointly optimise the algorithm parameters. The complete framework includes a method for adapting the tracking rate together with a criterion for realignment (perceived loss of track). ATSC adapts the amount of tracking overhead that matches well to the mobility level, without incurring frequent loss of track, as verified by an extensive set of experiments under both representative statistical channel models as well as realistic urban scenarios simulated by ray-tracing software. In particular, numerical results show that ATSC can track dominant channel directions with high accuracy for vehicles moving at 72 km/hour in complicated urban scenarios, with an overhead of less than 1%.
Integrating high altitude platforms (HAPs) and free-space optical (FSO) communications is a promising solution to establish high data rate aerial links for the next-generation wireless networks. However, practical limitations such as pointing errors
and angle-of-arrival (AOA) fluctuations of the optical beam due to the orientation deviations of hovering HAPs make it challenging to implement HAP-based FSO links. For a ground-to-HAP FSO link, tractable, closed-form statistical channel models are derived in this paper to simplify the optimal design of such systems. The proposed models include the combined effects of atmospheric turbulence regimes (i.e., log-normal and gamma-gamma), pointing error induced geometrical loss, pointing jitter variance caused by beam wander, detector aperture size, beam-width, and AOA fluctuations of the received optical beam. The analytical expressions are corroborated by performing Monte-Carlo simulations. Furthermore, closed-form expressions for the outage probability of the considered link under different turbulence regimes are derived. Detailed analysis is carried out to optimize the transmitted laser beam and the field-of-view of the receiver for minimizing outage probability under different channel conditions. The obtained analytical results can be applied to finding the optimal parameter values and designing ground-to-HAP FSO links without resorting to time-consuming simulations.
With the open of the scale-up commercial deployment of 5G network, more and more researchers and related organizations began to consider the next generation of mobile communication system. This article will explore the 6G concept for 2030s. Firstly,
this article summarizes the future 6G vision with four keywords: Intelligent Connectivity, Deep Connectivity, Holographic Connectivity and Ubiquitous Connectivity, and these four keywords together constitute the 6G overall vision of Wherever you think, everything follows your heart . Then, the technical requirements and challenges to realize the 6G vision are analyzed, including peak throughput, higher energy efficiency, connection every where and anytime, new theories and technologies, self-aggregating communications fabric, and some non-technical challenges. Then the potential key technologies of 6G are classified and presented: communication technologies on new spectrum, including terahertz communication and visible light communication; fundamental technologies, including sparse theory (compressed sensing), new channel coding technology, large-scale antenna and flexible spectrum usage; special technical features, including Space-Air-Ground-Sea integrated communication and wireless tactile network. By exploring the 6G vision, requirements and challenges, as well as potential key technologies, this article attempts to outline the overall framework of 6G, and to provide directional guidance for the subsequent 6G research. Keywords 6G, vision, terahertz, VLC, compressed sensing, free duplex, wireless tactile network
This paper reports a detailed experimental characterization of optical performances of Visible Light Communication (VLC) system using a real traffic light for ultra-low latency, infrastructure-to-vehicle (I2V) communications for intelligent transport
ation systems (ITS) protocols. Despite the implementation of long sought ITS protocols poses the crucial need to detail how the features of optical stages influence the overall performances of a VLC system in realistic configurations, such characterization has rarely been addressed at present. We carried out an experimental investigation in a realistic configuration where a regular traffic light (TX), enabled for VLC transmission, sends digital information towards a receiving stage (RX), composed by an optical condenser and a dedicated amplified photodiode stage. We performed a detailed measurements campaign of VLC performances encompassing a broad set of optical condensers, and for TX-RX distances in the range 3 - 50 m, in terms of both effective field of view (EFOV) and packet error rate (PER). The results show several nontrivial behaviors for different lens sets as a function of position on the measurement grid, highlighting critical aspects as well as identifying most suitable optical configurations depending on the specific application and on the required EFOV. In this paper we also provide a theoretical model for both the signal intensity and the EFOV as a function of several parameters, such as distance, RX orientation and focal length of the specific condenser. Our results could be very relevant in the near future to assess a most suited solution in terms of acceptance angle when designing a VLC system for real applications, where angle-dependent misalignment effects play a non-negligible role, and we argue that it could have more general implications with respect to the pristine I2V case mentioned here.
The concept of reconfigurable intelligent surface (RIS) has been proposed to change the propagation of electromagnetic waves, e.g., reflection, diffraction, and refraction. To accomplish this goal, the phase values of the discrete RIS units need to b
e optimized. In this paper, we consider RIS-aided millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems for both accurate positioning and high data-rate transmission. We propose an adaptive phase shifter design based on hierarchical codebooks and feedback from the mobile station (MS). The benefit of the scheme lies in that the RIS does not require deployment of any active sensors and baseband processing units. During the update process of phase shifters, the combining vector at the MS is also sequentially refined. Simulation results show the performance improvement of the proposed algorithm over the random design scheme, in terms of both positioning accuracy and data rate. Moreover, the performance converges to exhaustive search scheme even in the low signal-to-noise ratio regime.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
