اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMathematical model of LoRaWAN channel access
99
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
While 3GPP has been developing NB-IoT, the market of Low Power Wide Area Networks has been mastered by cheap and simple Sigfox and LoRa/LoRaWAN technologies. Being positioned as having an open standard, LoRaWAN has attracted also much interest from the research community. Specifically, many papers address the efficiency of its PHY layer. However MAC is still underinvestigated. Existing studies of LoRaWAN do not take into account the acknowledgement and retransmission policy, which may lead to incorrect results. In this paper, we carefully take into account the peculiarities of LoRaWAN transmission retries and show that it is the weakest issue of this technology, which significantly increases failure probability for retries. The main contribution of the paper is a mathematical model which accurately estimates how packet error rate depends on the offered load. In contrast to other papers, which evaluate LoRaWAN capacity just as the maximal throughput, our model can be used to find the maximal load, which allows reliable packet delivery.
قيم البحث
اقرأ أيضاً
LoRaWAN is a promising low power long range wireless communications technology for the Internet of Things. An important feature of LoRaWAN gateways is related to so-called capture effect: under some conditions the gateway may correctly receive a fram
e even if it overlaps with other ones. In this paper, we develop a pioneering mathematical model of a LoRaWAN network which allows finding network capacity and transmission reliability taking into account the capture effect.
In this document, we prove the convergence of the model proposed in [1], which aims at estimating the LoRaWAN network performance in a single-gateway scenario. First, we provide an analytical proof of the existence of a fixed point solution for such
a system. Then, we report experimental results, showing that the system of the two inter-dependent equations provided by the model can be solved through fixed-point iterations, and that a limited number of iterations is enough to reach convergence.
Real-Time Applications (RTA) are among the most important use cases for future Wi-Fi 7, defined by the IEEE 802.11be standard. This paper studies two backward-compatible channel access approaches to satisfy the strict quality of service (QoS) require
ments of RTA on the transmission latency and packet loss rate that have been considered in the 802.11be Task Group. The first approach is based on limiting the transmission duration of non-RTA frames in the network. The second approach is based on preliminary channel access to ensure the timely delivery of RTA frames. With the developed mathematical model of these approaches, it is shown that both of them can satisfy the RTA QoS requirements. At the same time, the preliminary channel access provides up to 60% higher efficiency of the channel usage by the non-RTA traffic in scenarios with very strict RTA QoS requirements or with low intensity of the RTA traffic.
This paper presents the LoRaWAN at the Edge Dataset (LoED), an open LoRaWAN packet dataset collected at gateways. Real-world LoRaWAN datasets are important for repeatable sensor-network and communications research and evaluation as, if carefully coll
ected, they provide realistic working assumptions. LoED data is collected from nine gateways over a four month period in a dense urban environment. The dataset contains packet header information and all physical layer properties reported by gateways such as the CRC, RSSI, SNR and spreading factor. Files are provided to analyse the data and get aggregated statistics. The dataset is available at: doi.org/10.5281/zenodo.4121430
Low-power wide-area network technologies such as LoRaWAN are promising for collecting low-rate monitoring data from geographically distributed sensors, in which timestamping the sensor data is a critical system function. This paper considers a synchr
onization-free approach to timestamping LoRaWAN uplink data based on signal arrival time at the gateway, which well matches LoRaWANs one-hop star topology and releases bandwidth from transmitting timestamps and synchronizing end devices clocks at all times. However, we show that this approach is susceptible to a {em frame delay attack} consisting of malicious frame collision and delayed replay. Real experiments show that the attack can affect the end devices in large areas up to about $50,000,text{m}^2$. In a broader sense, the attack threatens any system functions requiring timely deliveries of LoRaWAN frames. To address this threat, we propose a $mathsf{LoRaTS}$ gateway design that integrates a commodity LoRaWAN gateway and a low-power software-defined radio receiver to track the inherent frequency biases of the end devices. Based on an analytic model of LoRas chirp spread spectrum modulation, we develop signal processing algorithms to estimate the frequency biases with high accuracy beyond that achieved by LoRas default demodulation. The accurate frequency bias tracking capability enables the detection of the attack that introduces additional frequency biases. We also investigate and implement a more crafty attack that uses advanced radio apparatuses to eliminate the frequency biases. To address this crafty attack, we propose a pseudorandom interval hopping scheme to enhance our frequency bias tracking approach. Extensive experiments show the effectiveness of our approach in deployments with real affecting factors such as temperature variations.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
