ترغب بنشر مسار تعليمي؟ اضغط هنا

Combined effects of amplitude, frequency and bandwidth on wavepackets in laminar turbulent transition

84   0   0.0 ( 0 )
 نشر من قبل Kean Lee Kang
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

This study concerns wavepackets in laminar turbulent transition in a Blasius boundary layer. While initial amplitude and frequency have well-recognized roles in the transition process, the current study on the combined effects of amplitude, frequency, and bandwidth on the propagation of wavepackets is believed to be new. Because of the complexity of the system, these joint variations in multiple parameters could give rise to effects not seen through the variation of any single parameter. Direct numerical simulations (DNS) are utilized in a full factorial (fully crossed) design to investigate both individual and joint effects of variation in the simulation parameters, with a special focus on three distinct variants of wavepacket transition {textemdash} the reverse Craik triad formation sequence, concurrent N-type and K-type transition and abrupt shifts in dominant frequency. From our factorial study, we can summarize the key transition trends of wavepackets as follows: 1. Broad bandwidth wavepackets predominantly transit to turbulence via the N-route. This tendency remains strong even as the frequency width is reduced. 2. Narrow bandwidth wavetrains exhibit predominantly K-type transition. The front broadband part of an emerging wavetrain may experience N-type transition, but this wavefront should not be considered as a part of truly narrow-bandwidth wavepackets. 3. K-type transition is the most likely for wavepackets that are initiated with high energy/amplitude and/or with the peak frequency at the lower branch of the neutral stability curve.



قيم البحث

اقرأ أيضاً

115 - K. T. Trinh 2010
In this visualisation, the transition from laminar to turbulent flow is characterised by the intermittent ejection of wall fluid into the outer stream. The normalised thickness of the viscous flow layer reaches an asymptotic value but the physical th ickness drops exponentially after transition. The critical transition pipe Reynolds number can be obtained simply by equating it with the asymptotic value of the normalised thickness of viscous flow layer. Key words: Transition, critical stability Reynolds number, critical transition Reynolds number, non-Newtonian pipe flow
Wall-bounded flows experience a transition to turbulence characterized by the coexistence of laminar and turbulent domains in some range of Reynolds number R, the natural control parameter. This transitional regime takes place between an upper thresh old Rt above which turbulence is uniform (featureless) and a lower threshold Rg below which any form of turbulence decays, possibly at the end of overlong chaotic transients. The most emblematic cases of flow along flat plates transiting to/from turbulence according to this scenario are reviewed. The coexistence is generally in the form of bands, alternatively laminar and turbulent, and oriented obliquely with respect to the general flow direction. The final decay of the bands at Rg points to the relevance of directed percolation and criticality in the sense of statistical-physics phase transitions. The nature of the transition at Rt where bands form is still somewhat mysterious and does not easily fit the scheme holding for pattern-forming instabilities at increasing control parameter on a laminar background. In contrast, the bands arise at Rt out of a uniform turbulent background at a decreasing control parameter. Ingredients of a possible theory of laminar-turbulent patterning are discussed.
136 - Paul Manneville 2016
Plane Couette flow presents a regular oblique turbulent-laminar pattern over a wide range of Reynolds numbers R between the globally stable base flow profile at low R<R_g and a uniformly turbulent regime at sufficiently large R>R_t. The numerical sim ulations that we have performed on a pattern displaying a wavelength modulation show a relaxation of that modulation in agreement with what one would expect from a standard approach in terms of dissipative structures in extended geometry though the structuration develops on a turbulent background. Some consequences are discussed.
132 - Lutz Lesshafft 2018
Coherent turbulent wave-packet structures in a jet at Reynolds number 460000 and Mach number 0.4 are extracted from experimental measurements and are modeled as linear fluctuations around the mean flow. The linear model is based on harmonic optimal f orcing structures and their associated flow response at individual Strouhal numbers, obtained from analysis of the global linear resolvent operator. These forcing-response wave packets (resolvent modes) are first discussed with regard to relevant physical mechanisms that provide energy gain of flow perturbations in the jet. Modal shear instability and the nonmodal Orr mechanism are identified as dominant elements, cleanly separated between the optimal and suboptimal forcing-response pairs. A theoretical development in the framework of spectral covariance dynamics then explicates the link between linear harmonic forcing-response structures and the cross-spectral density (CSD) of stochastic turbulent fluctuations. A low-rank model of the CSD at given Strouhal number is formulated from a truncated set of linear resolvent modes. Corresponding experimental CSD matrices are constructed from extensive two-point velocity measurements. Their eigenmodes (spectral proper orthogonal or SPOD modes) represent coherent wave-packet structures, and these are compared to their counterparts obtained from the linear model. Close agreement is demonstrated in the range of preferred mode Strouhal numbers, around a value of 0.4, between the leading coherent wave-packet structures as educed from the experiment and from the linear resolvent-based model.
This paper concerns the study of direct numerical simulation (DNS) data of a wavepacket in laminar turbulent transition in a Blasius boundary layer. The decomposition of this wavepacket into a set of modes (a basis that spans an approximate solution space) can be achieved in a wide variety of ways. Two well-known tools are the fast Fourier transform (FFT) and the proper orthogonal decomposition (POD). To synergize the strengths of both methods, a hybrid POD-FFT is pioneered, using the FFT as a tool for interpreting the POD modes. The POD-FFT automatically identifies well-known fundamental, subharmonic and Klebanoff modes in the flow, even though it is blind to the underlying physics. Moreover, the POD-FFT further separates the subharmonic content of the wavepacket into three fairly distinct parts: a positively detuned mode resembling a Lambda-vortex, a Craik-type tuned mode and a Herbert-type positive-negative detuned mode pair, in decreasing order of energy. This distinction is less widely recognized, but it provides a possible explanation for the slightly positively detuned subharmonic mode often observed in previous experiments and simulations.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا