اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPFLOTRAN-SIP: A PFLOTRAN Module for Simulating Spectral-Induced Polarization of Electrical Impedance Data
67
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Spectral induced polarization (SIP) is a non-intrusive geophysical method that is widely used to detect sulfide minerals, clay minerals, metallic objects, municipal wastes, hydrocarbons, and salinity intrusion. However, SIP is a static method that cannot measure the dynamics of flow and solute/species transport in the subsurface. To capture these dynamics, the data collected with the SIP technique needs to be coupled with fluid flow and reactive-transport models. To our knowledge, currently, there is no simulator in the open-source literature that couples fluid flow, solute transport, and SIP process models to analyze geoelectrical signatures in a large-scale system. A massively parallel simulation framework (PFLOTRAN-SIP) was built to couple SIP data to fluid flow and solute transport processes. This framework built on the PFLOTRAN-E4D simulator that couples PFLOTRAN and E4D, without sacrificing computational performance. PFLOTRAN solves the coupled flow and solute transport process models to estimate solute concentrations, which were used in Archies model to compute bulk electrical conductivities at near-zero frequency. These bulk electrical conductivities were modified using the Cole-Cole model to account for frequency dependence. Using the estimated frequency-dependent bulk conductivities, E4D simulated the real and complex electrical potential signals for selected frequencies for SIP. The PFLOTRAN-SIP framework was demonstrated through a synthetic tracer-transport model simulating tracer concentration and electrical impedances for four frequencies. Later, SIP inversion estimated bulk electrical conductivities by matching electrical impedances for each specified frequency. The estimated bulk electrical conductivities were consistent with the simulated tracer concentrations from the PFLOTRAN-SIP forward model.
قيم البحث
اقرأ أيضاً
In this work, we consider alternative discretizations for PDEs which use expansions involving integral operators to approximate spatial derivatives. These constructions use explicit information within the integral terms, but treat boundary data impli
citly, which contributes to the overall speed of the method. This approach is provably unconditionally stable for linear problems and stability has been demonstrated experimentally for nonlinear problems. Additionally, it is matrix-free in the sense that it is not necessary to invert linear systems and iteration is not required for nonlinear terms. Moreover, the scheme employs a fast summation algorithm that yields a method with a computational complexity of $mathcal{O}(N)$, where $N$ is the number of mesh points along a direction. While much work has been done to explore the theory behind these methods, their practicality in large scale computing environments is a largely unexplored topic. In this work, we explore the performance of these methods by developing a domain decomposition algorithm suitable for distributed memory systems along with shared memory algorithms. As a first pass, we derive an artificial CFL condition that enforces a nearest-neighbor communication pattern and briefly discuss possible generalizations. We also analyze several approaches for implementing the parallel algorithms by optimizing predominant loop structures and maximizing data reuse. Using a hybrid design that employs MPI and Kokkos for the distributed and shared memory components of the algorithms, respectively, we show that our methods are efficient and can sustain an update rate $> 1times10^8$ DOF/node/s. We provide results that demonstrate the scalability and versatility of our algorithms using several different PDE test problems, including a nonlinear example, which employs an adaptive time-stepping rule.
We present an arbitrary-order spectral element method for general-purpose simulation of non-overturning water waves, described by fully nonlinear potential theory. The method can be viewed as a high-order extension of the classical finite element met
hod proposed by Cai et al (1998) cite{CaiEtAl1998}, although the numerical implementation differs greatly. Features of the proposed spectral element method include: nodal Lagrange basis functions, a general quadrature-free approach and gradient recovery using global $L^2$ projections. The quartic nonlinear terms present in the Zakharov form of the free surface conditions can cause severe aliasing problems and consequently numerical instability for marginally resolved or very steep waves. We show how the scheme can be stabilised through a combination of over-integration of the Galerkin projections and a mild spectral filtering on a per element basis. This effectively removes any aliasing driven instabilities while retaining the high-order accuracy of the numerical scheme. The additional computational cost of the over-integration is found insignificant compared to the cost of solving the Laplace problem. The model is applied to several benchmark cases in two dimensions. The results confirm the high order accuracy of the model (exponential convergence), and demonstrate the potential for accuracy and speedup. The results of numerical experiments are in excellent agreement with both analytical and experimental results for strongly nonlinear and irregular dispersive wave propagation. The benefit of using a high-order -- possibly adapted -- spatial discretization for accurate water wave propagation over long times and distances is particularly attractive for marine hydrodynamics applications.
Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to dev
elop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3) Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The fin
In Electrical Impedance Tomography (EIT), the internal conductivity of a body is recovered via current and voltage measurements taken at its surface. The reconstruction task is a highly ill-posed nonlinear inverse problem, which is very sensitive to
noise, and requires the use of regularized solution methods, of which D-bar is the only proven method. The resulting EIT images have low spatial resolution due to smoothing caused by low-pass filtered regularization. In many applications, such as medical imaging, it is known emph{a priori} that the target contains sharp features such as organ boundaries, as well as approximate ranges for realistic conductivity values. In this paper, we use this information in a new edge-preserving EIT algorithm, based on the original D-bar method coupled with a deblurring flow stopped at a minimal data discrepancy. The method makes heavy use of a novel data fidelity term based on the so-called {em CGO sinogram}. This nonlinear data step provides superior robustness over traditional EIT data formats such as current-to-voltage matrices or Dirichlet-to-Neumann operators, for commonly used current patterns.
A novel computational, non-iterative and noise-robust reconstruction method is introduced for the planar anisotropic inverse conductivity problem. The method is based on bypassing the unstable step of the reconstruction of the values of the isotherma
l coordinates on the boundary of the domain. Non-uniqueness of the inverse problem is dealt with by recovering the unique isotropic conductivity that can be achieved as a deformation of the measured anisotropic conductivity by emph{isothermal coordinates}. The method shows how isotropic D-bar reconstruction methods have produced reasonable and informative reconstructions even when used on EIT data known to come from anisotropic media, and when the boundary shape is not known precisely. Furthermore, the results pave the way for regularized anisotropic EIT. Key aspects of the approach involve D-bar methods and inverse scattering theory, complex geometrical optics solutions, and quasi-conformal mapping techniques.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
