ترغب بنشر مسار تعليمي؟ اضغط هنا

Meso-resolved simulations of shock-to-detonation transition in nitromethane with air-filled cavities

79   0   0.0 ( 0 )
 نشر من قبل XiaoCheng Mi Dr.
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Two-dimensional, meso-resolved numerical simulations are performed to investigate the complete shock-to-detonation transition (SDT) process in a mixture of liquid nitromethane (NM) and air-filled, circular cavities. The shock-induced initiation behaviors resulting from the cases with neat NM, NM with an array of regularly spaced cavities, and NM with randomly distributed cavities are examined. For the case with randomly distributed cavities, hundreds of cavities are explicitly resolved in the simulations using a diffuse-interface approach to treat two immiscible fluids and GPU-enabled parallel computing. Without invoking any empirically calibrated, phenomenological models, the reaction rate in the simulations is governed by Arrhenius kinetics. For the cases with neat NM, the resulting SDT process features a superdetonation that evolves from a thermal explosion after a delay following the passage of the incident shock wave and eventually catches up with the leading shock front. For the cases wherein mesoscale heterogeneities are explicitly considered, a gradual SDT process is captured. These two distinct initiation behaviors for neat NM and heterogeneous NM mixtures agree with experimental findings. Via examining the global reaction rate of the mixture, a unique time scale characterizing the SDT process, i.e., the overtake time, is measured for each simulation. For an input shock pressure less than approximately $9.4~mathrm{GPa}$, the overtake time resulting from a heterogeneous mixture is shorter than that for neat NM. This sensitizing effect is more pronounced for lower input shock pressures. A random distribution of cavities is found to be more effective in enhancing the SDT process than a regular array of cavities. Statistical analysis on the meso-resolved simulation data provides more insights into the mechanism of energy release underlying the SDT process.

قيم البحث

اقرأ أيضاً

The sensitizing effect of cavities in the form of microbubbles on the shock initiation of a homogeneous liquid explosive is studied computationally. While the presence of voids in an explosive has long been known to induce so-called hot spots that gr eatly accelerate the global reaction rate, the ability to computationally resolve the details of the interaction of the shock front with heterogeneities existing on the scale of the detonation reaction zone has only recently become feasible. In this study, the influence of the spatial distribution of air-filled cavities has been examined, enabled by the use of graphic processing unit (GPU) accelerated computations that can resolve shock initiation and detonation propagation through an explosive while fully resolving features at the mesoscale. Different spatial distributions of cavities are examined in two-dimensional simulations, including regular arrays of cavities, slightly perturbed arrays, random arrays (with varying minimum spacing being imposed on the cavities), and randomly distributed clusters of cavities. The presence of the cavities is able to reduce the time required to initiate detonation---for a given input shock strength---by greater than 50%, in agreement with previous experimental results. Randomly distributing the cavities results in a 15-20% decrease in detonation initiation time in comparison to a regular array of cavities. Clustering the cavities---as would occur in the case of agglomeration---results in an additional 10% decrease in detonation initiation time in comparison to random arrays. The effect of clustering is shown not to be a result of the clusters forming an effectively larger cavity, but rather due to interactions between clusters upon shock loading occurring on the microscale.
Dynamics of ethylene autoignition and Deflagration-to-Detonation Transition (DDT) in a one-dimensional shock tube are numerically investigated using a skeletal chemistry including 10 species and 10 reactions. Different combustion modes are investigat ed through considering various premixed gas equivalence ratios (0.2 to 2.0) and incident shock wave Mach numbers (1.8 to 3.2). Four ignition and DDT modes are observed from the studied cases, i.e., no ignition, deflagration combustion, detonation after reflected shock and deflagration behind the incident shock. For detonation development behind the reflected shock, three autoignition hot spots are formed. The first one occurs at the wall surface after the re-compression of the reflected shock and contact surface, which further develops to a reaction shock because of the explosion in the explosion regime. The other two are off the wall, respectively caused by the reflected shock rarefaction wave interaction and reaction induction in the compressed mixture. The last hot spot develops to a reaction wave and couples with the reflected shock after a DDT process, which eventually leads to detonation combustion. For deflagration development behind the reflected shock, the wave interactions, wall surface autoignition hot spot as well as its induction of reaction shock are qualitatively similar to the mode of detonation after incident shock reflection, before the reflected shock rarefaction wave collision point. However, only one hot spot is induced after the collision, which also develops to a reaction wave but cannot catch up with the reflected shock. For deflagration behind the incident shock, deflagration combustion is induced by the incident shock compression whereas detonation occurs after the shock reflection.
We present a shock capturing method for large-eddy simulation of turbulent flows. The proposed method relies on physical mechanisms to resolve and smooth sharp unresolved flow features that may otherwise lead to numerical instability, such as shock w aves and under-resolved thermal and shear layers. To that end, we devise various sensors to detect when and where the shear viscosity, bulk viscosity and thermal conductivity of the fluid do not suffice to stabilize the numerical solution. In such cases, the fluid viscosities are selectively increased to ensure the cell Peclet number is of order one so that these flow features can be well represented with the grid resolution. Although the shock capturing method is devised in the context of discontinuous Galerkin methods, it can be used with other discretization schemes. The performance of the method is illustrated through numerical simulation of external and internal flows in transonic, supersonic, and hypersonic regimes. For the problems considered, the shock capturing method performs robustly, provides sharp shock profiles, and has a small impact on the resolved turbulent structures. These three features are critical to enable robust and accurate large-eddy simulations of shock flows.
The interaction of streamers in nitrogen-oxygen mixtures such as air is studied. First, an efficient method for fully three-dimensional streamer simulations in multiprocessor machines is introduced. With its help, we find two competing mechanisms how two adjacent streamers can interact: through electrostatic repulsion and through attraction due to nonlocal photo-ionization. The non-intuitive effects of pressure and of the nitrogen-oxygen ratio are discussed. As photo-ionization is experimentally difficult to access, we finally suggest to measure it indirectly through streamer interactions.
We introduce a textit{non-modal} analysis technique that characterizes the diffusion properties of spectral element methods for linear convection-diffusion systems. While strictly speaking only valid for linear problems, the analysis is devised so th at it can give critical insights on two questions: (i) Why do spectral element methods suffer from stability issues in under-resolved computations of nonlinear problems? And, (ii) why do they successfully predict under-resolved turbulent flows even without a subgrid-scale model? The answer to these two questions can in turn provide crucial guidelines to construct more robust and accurate schemes for complex under-resolved flows, commonly found in industrial applications. For illustration purposes, this analysis technique is applied to the hybridized discontinuous Galerkin methods as representatives of spectral element methods. The effect of the polynomial order, the upwinding parameter and the Peclet number on the so-called textit{short-term diffusion} of the scheme are investigated. From a purely non-modal analysis point of view, polynomial orders between $2$ and $4$ with standard upwinding are well suited for under-resolved turbulence simulations. For lower polynomial orders, diffusion is introduced in scales that are much larger than the grid resolution. For higher polynomial orders, as well as for strong under/over-upwinding, robustness issues can be expected. The non-modal analysis results are then tested against under-resolved turbulence simulations of the Burgers, Euler and Navier-Stokes equations. While devised in the linear setting, our non-modal analysis succeeds to predict the behavior of the scheme in the nonlinear problems considered.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا