ترغب بنشر مسار تعليمي؟ اضغط هنا

Optimization of Patterned Surfaces for Improved Superhydrophobicity Through Cost-Effective Large-Scale Computations

95   0   0.0 ( 0 )
 نشر من قبل Vasileios Krokos
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The growing need for creating surfaces with specific wetting properties, such as superhyrdophobic behavior, asks for novel methods for their efficient design. In this work, a fast computational method for the evaluation of patterned superhyrdophobic surfaces is introduced. The hydrophobicity of a surface is quantified in energy terms through an objective function. The increased computational cost led to the parallelization of the method with the Message Passing Interface (MPI) communication protocol that enables calculations on distributed memory systems allowing for parametric investigations at acceptable time frames. The method is demonstrated for a surface consisting of an array of pillars with inverted conical (frustum) geometry. The parallel speedup achieved allows for low cost parametric investigations on the effect of the fine features (curvature and slopes) of the pillars on the superhydophobicity of the surface and consequently for the optimization of superhyrdophobic surfaces.



قيم البحث

اقرأ أيضاً

A theory for wetting of structured solid surfaces is developed, based on the delta-comb periodic potential. It possesses two matching parameters: the effective line tension and the friction coefficient on the three-phase contact line at the surface. The theory is validated on the dynamics of spreading of liquid zinc droplets on morphologically patterned zinkophilic iron surface by means of square patterns of zinkophobic aluminum oxide. It is found that the effective line tension is negative and it has essential contribution to the dynamics of spreading. Thus, the theoretical analysis shows that the presence of lyophobic patterns situated on lyophilic surface makes the latter completely wettable, i.e. no equilibrium contact angle on such surface exists making the droplet spread completely in form of thin liquid layer on the patterned surface.
In this paper we study a Darcy-scale mathematical model for biofilm formation in porous media. The pores in the core are divided into three phases: water, oil, and biofilm. The water and oil flow are modeled by an extended version of Darcys law and t he substrate is transported by diffusion and convection in the water phase. Initially there is biofilm on the pore walls. The biofilm consumes substrate for production of biomass and modifies the pore space which changes the rock permeability. The model includes detachment of biomass due to water flux and death of bacteria, and is implemented in MRST. We discuss the capability of the numerical simulator to capture results from laboratory experiments. We perform a novel sensitivity analysis based on sparse-grid interpolation and multi-wavelet expansion to identify the critical model parameters. Numerical experiments using diverse injection strategies are performed to study the impact of different porosity-permeability relations in a core saturated with water and oil.
98 - E. Leveque , F. Toschi , L. Shao 2006
A shear-improved Smagorinsky model is introduced based on recent results concerning shear effects in wall-bounded turbulence by Toschi et al. (2000). The Smagorinsky eddy-viscosity is modified subtracting the magnitude of the mean shear from the magn itude of the instantaneous resolved strain-rate tensor. This subgrid-scale model is tested in large-eddy simulations of plane-channel flows at two different Reynolds numbers. First comparisons with the dynamic Smagorinsky model and direct numerical simulations, including mean velocity, turbulent kinetic energy and Reynolds stress profiles, are shown to be extremely satisfactory. The proposed model, in addition of being physically sound, has a low computational cost and possesses a high potentiality of generalization to more complex non-homogeneous turbulent flows.
In recent years, the size of pre-trained language models (PLMs) has grown by leaps and bounds. However, efficiency issues of these large-scale PLMs limit their utilization in real-world scenarios. We present a suite of cost-effective techniques for t he use of PLMs to deal with the efficiency issues of pre-training, fine-tuning, and inference. (1) We introduce knowledge inheritance to accelerate the pre-training process by exploiting existing PLMs instead of training models from scratch. (2) We explore the best practice of prompt tuning with large-scale PLMs. Compared with conventional fine-tuning, prompt tuning significantly reduces the number of task-specific parameters. (3) We implement a new inference toolkit, namely InfMoE, for using large-scale PLMs with limited computational resources. Based on our cost-effective pipeline, we pre-train two models: an encoder-decoder bilingual model with 11 billion parameters (CPM-2) and its corresponding MoE version with 198 billion parameters. In our experiments, we compare CPM-2 with mT5 on downstream tasks. Experimental results show that CPM-2 has excellent general language intelligence. Moreover, we validate the efficiency of InfMoE when conducting inference of large-scale models having tens of billions of parameters on a single GPU. All source code and model parameters are available at https://github.com/TsinghuaAI/CPM.
Rough or textured hydrophobic surfaces are dubbed superhydrophobic due to their numerous desirable properties, such as water repellency and interfacial slip. Superhydrophobicity stems from an aversion for water to wet the surface texture, so that a w ater droplet in the superhydrophobic Cassie state, contacts only the tips of the rough hydrophobic surface. However, superhydrophobicity is remarkably fragile, and can break down due to the wetting of the surface texture to yield the Wenzel state under various conditions, such as elevated pressures or droplet impact. Moreover, due to large energetic barriers that impede the reverse (dewetting) transition, this breakdown in superhydrophobicity is widely believed to be irreversible. Using molecular simulations in conjunction with enhanced sampling techniques, here we show that on surfaces with nanoscale texture, water density fluctuations can lead to a reduction in the free energetic barriers to dewetting by circumventing the classical dewetting pathways. In particular, the fluctuation-mediated dewetting pathway involves a number of transitions between distinct dewetted morphologies, with each transition lowering the resistance to dewetting. Importantly, an understanding of the mechanistic pathways to dewetting and their dependence on pressure, allows us to augment the surface texture design, so that the barriers to dewetting are eliminated altogether and the Wenzel state becomes unstable at ambient conditions. Such robust surfaces, which defy classical expectations and can spontaneously recover their superhydrophobicity, could have widespread importance, from underwater operation to phase change heat transfer applications.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا