اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCASPR: Judiciously Using the Cloud for Wide-Area Packet Recovery
341
0
0.0
(
0
)
تأليف
Osama Haq
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We revisit a classic networking problem -- how to recover from lost packets in the best-effort Internet. We propose CASPR, a system that judiciously leverages the cloud to recover from lost or delayed packets. CASPR supplements and protects best-effort connections by sending a small number of coded packets along the highly reliable but expensive cloud paths. When receivers detect packet loss, they recover packets with the help of the nearby data center, not the sender, thus providing quick and reliable packet recovery for latency-sensitive applications. Using a prototype implementation and its deployment on the public cloud and the PlanetLab testbed, we quantify the benefits of CASPR in providing fast, cost effective packet recovery. Using controlled experiments, we also explore how these benefits translate into improvements up and down the network stack.
قيم البحث
اقرأ أيضاً
Recent advances in Low-Power Wide-Area Networks have mitigated interference by using cloud assistance. Those methods transmit the RSSI samples and corrupted packets to the cloud to restore the correct message. However, the effectiveness of those meth
ods is challenged by the high transmission data amount. This paper presents a novel method for interference mitigation in a Edge-Cloud collaborative manner, namely ECCR. It does not require transmitting RSSI sample any more, whose length is eight times of the packets. We demonstrate the disjointness of the bit errors of packets at the base stations via real-word experiments. ECCR leverages this to collaborate with multiple base stations for error recovery. Each base station detects and reports bit error locations to the cloud, then both error checking code and interfered packets from other receivers are utilized to restore correct packets. ECCR takes the advantages of both the global management ability of the cloud and the signal to perceive the benefit of each base station, and it is applicable to deployed LP-WAN systems (e.g. sx1280) without any extra hardware requirement. Experimental results show that ECCR is able to accurately decode packets when packets have nearly 51.76% corruption.
Modern cloud orchestrators like Kubernetes provide a versatile and robust way to host applications at scale. One of their key features is autoscaling, which automatically adjusts cloud resources (compute, memory, storage) in order to adapt to the dem
ands of applications. However, the scope of cloud autoscaling is limited to the datacenter hosting the cloud and it doesnt apply uniformly to the allocation of network resources. In I/O-constrained or data-in-motion use cases this can lead to severe performance degradation for the application. For example, when the load on a cloud service increases and the Wide Area Network (WAN) connecting the datacenter to the Internet becomes saturated, the application flows experience an increase in delay and loss. In many cases this is dealt with overprovisioning network capacity, which introduces additional costs and inefficiencies. On the other hand, thanks to the concept of Network as Code, the WAN exposes a set of APIs that can be used to dynamically allocate and de-allocate capacity on-demand. In this paper we propose extending the concept of cloud autoscaling into the network to address this limitation. This way, applications running in the cloud can communicate their networking requirements, like bandwidth or traffic profile, to a Software-Defined Networking (SDN) controller or Network as a Service (NaaS) platform. Moreover, we aim to define the concepts of vertical and horizontal autoscaling applied to networking. We present a prototype that automatically allocates bandwidth to the underlay network, according to the requirements of the applications hosted in Kubernetes. Finally, we discuss open research challenges.
Recent years have witnessed the proliferation of Low-power Wide Area Networks (LPWANs) in the unlicensed band for various Internet-of-Things (IoT) applications. Due to the ultra-low transmission power and long transmission duration, LPWAN devices ine
vitably suffer from high power Cross Technology Interference (CTI), such as interference from Wi-Fi, coexisting in the same spectrum. To alleviate this issue, this paper introduces the Partial Symbol Recovery (PSR) scheme for improving the CTI resilience of LPWAN. We verify our idea on LoRa, a widely adopted LPWAN technique, as a proof of concept. At the PHY layer, although CTI has much higher power, its duration is relatively shorter compared with LoRa symbols, leaving part of a LoRa symbol uncorrupted. Moreover, due to its high redundancy, LoRa chips within a symbol are highly correlated. This opens the possibility of detecting a LoRa symbol with only part of the chips. By examining the unique frequency patterns in LoRa symbols with time-frequency analysis, our design effectively detects the clean LoRa chips that are free of CTI. This enables PSR to only rely on clean LoRa chips for successfully recovering from communication failures. We evaluate our PSR design with real-world testbeds, including SX1280 LoRa chips and USRP B210, under Wi-Fi interference in various scenarios. Extensive experiments demonstrate that our design offers reliable packet recovery performance, successfully boosting the LoRa packet reception ratio from 45.2% to 82.2% with a performance gain of 1.8 times.
The last few years have seen the proliferation of low-power wide area networks like LoRa, Sigfox and 802.11ah, each of which use a different and sometimes proprietary coding and modulation scheme, work below the noise floor and operate on the same fr
equency band. We introduce DeepSense, which is the first carrier sense mechanism that enables random access and coexistence for low-power wide area networks even when signals are below the noise floor. Our key insight is that any communication protocol that operates below the noise floor has to use coding at the physical layer. We show that neural networks can be used as a general algorithmic framework that can learn the coding mechanisms being employed by such protocols to identify signals that are hidden within noise. Our evaluation shows that DeepSense performs carrier sense across 26 different LPWAN protocols and configurations below the noise floor and can operate in the presence of frequency shifts as well as concurrent transmissions. Beyond carrier sense, we also show that DeepSense can support multi bit-rate LoRa networks by classifying between 21 different LoRa configurations and flexibly adapting bitrates based on signal strength. In a deployment of a multi-rate LoRa network, DeepSense improves bit rate by 4x for nearby devices and provides a 1.7x increase in the number of locations that can connect to the campus-wide network.
Inter-datacenter networks connect dozens of geographically dispersed datacenters and carry traffic flows with highly variable sizes and different classes. Adaptive flow routing can improve efficiency and performance by assigning paths to new flows ac
cording to network status and flow properties. A popular approach widely used for traffic engineering is based on current bandwidth utilization of links. We propose an alternative that reduces bandwidth usage by up to at least 50% and flow completion times by up to at least 40% across various scheduling policies and flow size distributions.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
