ترغب بنشر مسار تعليمي؟ اضغط هنا

Interaction of Love waves with coupled cavity modes in a 2D holey phononic crystal

118   0   0.0 ( 0 )
 نشر من قبل Yuxin Liu
 تاريخ النشر 2018
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO2 film deposited on a ST-cut quartz substrate. The coupling between SH modes and torsional mode in pillars induces a transmission dip that occurs at a frequency located in the range of the band-gap of the holey phononic crystal. Second, a cavity is constructed by removing lines of holes in the holey phononic crystal and results in a transmission peak that matches the dip. The optimal geometrical parameters enable us to create a coupling of the cavity mode and the localized pillar mode by introducing lines of pillars into the cavity, which significantly improved the efficiency of the cavity without increasing the crystal size. The obtained results will pave the way to implement advanced designs of high-performance electroacoustic sensors based on coupling modes in phononic crystals.



قيم البحث

اقرأ أيضاً

The non-Markov processes widely exist in thermodymanic processes, while it usually requires packing of many transistors and memories with great system complexity in traditional device architecture to minic such functions. Two-dimensional (2D) materia l-based resistive random access memory (RRAM) devices show potential for next-generation computing systems with much-reduced complexity. Here, we achieve the non-Markov chain in an individual RRAM device based on 2D mica with a vertical metal/mica/metal structure. We find that the internal potassium ions (K+) in 2D mica gradually move along the direction of the applied electric field, making the initially insulating mica conductive. The accumulation of K+ is tuned by electrical field, and the 2D-mica RRAM possesses both unipolar and bipolar memory windows, high on/off ratio, decent stability and repeatability.Importantly, the non-Markov chain algorithm is established for the first time in a single RRAM, in which the movement of K+ is dependent on the stimulated voltage as well as their past states. This work not only uncovers the inner ionic conductivity of 2D mica, but also opens the door for such novel RRAM devices with numerous functions and applications.
Autler-Townes Splitting (ATS) and Electromagnetically Induced Transparency (EIT) are similar phenomena but distinct in nature. They have been widely discussed and distinguished by employing the Akaike information criterion (AIC). However, such work i s lacking in acoustic system. In this work, the interaction of Love waves with two-line pillared meta-surface is numerically investigated by Finite Element Method. Acoustic analogue of ATS, Fabry-Perot resonance and cavity modes are first demonstrated in two lines of identical pillars by varying the distance between the pillar lines. By detuning the radius of one line of pillars, Fabry-Perot resonance along with two different pillar resonances give rise to the acoustic analogue of EIT (AIT) when the distance between the pillar lines is a multiple of half wavelength. ATS and AIT formula models are used to fit the transmission spectra, showing good agreements with numerical results. The quality of the fit models is quantitatively evaluated by resorting to the AIC. We show that theoretical and analytical discrimination between ATS and AIT are methodologically complementary. These results should have important consequences for potential acoustic applications such as wave control, designing of meta-materials and bio-sensors.
114 - Qibin Zeng , Kaiyang Zeng 2021
Parametrically tuning the oscillation dynamics of coupled micro/nano-mechanical resonators through a mechanical pump scheme has recently attracted great attentions from fundamental physics to various applications. However, the special design of the c oupled resonators and low dissipation operation conditions significantly restrict the wide application of this tuning technique. In this study, we will show that, under ambient conditions, mechanical pump can parametrically control the oscillation dynamics in a single commercial microcantilever resonator. A strong phonon-cavity coupling with cooperativity up to ~398 and normal-mode splitting are observed in the microcantilever. The strong parametric interaction of the phonon-cavity coupling enables using mechanical pump to achieve a 43 dB (3 dB) parametric amplification (cooling). By utilizing mechanical pump, the force sensitivity and signal-to-noise ratio of the frequency-modulation Kelvin Probe Force Microscopy can be significantly improved in the ambient environment. Furthermore, both single-mode and two-mode thermomechanical noise squeezing states can be created in the microcantilever via applying mechanical pump.
Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a 6 gigahertz acoustic resonance to a wavelength-scale volume of less than one cubic micron. The strong piezoelectricity of lithium niobate efficiently couples the localized vibrations to the electric field of a widely tunable high-impedance Josephson junction array resonator. We measure a direct phonon-photon coupling rate $g/2pi approx 1.6 , mathrm{MHz}$ and a mechanical quality factor $Q_mathrm{m} approx 3 times 10^4$ leading to a cooperativity $Csim 4$ when the two modes are tuned into resonance. Our work has direct application to engineering hybrid quantum systems for microwave-to-optical conversion as well as emerging architectures for quantum information processing.
We show unusual cooperative two-photon resonance between two-modes of field inside a photonic crystal cavity. The two-photon resonance occurs when two off resonant quantum dots emit one photon in each cavity mode and de-excite simultaneously. In the presence of phonon coupling the conditions for two-photon resonance change significantly. Using such two-photon two-mode interaction we propose to generate entangled state of two qutrits. The basis of a qutrit are formed by the state of the cavity mode containing $0$, $1$ and $2$ photons. We also discuss effect of phonon coupling on negativity of the generated entangled state.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا