اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMeteorological data from KLAWS-2G for an astronomical site survey of Dome A, Antarctica
119
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present an analysis of meteorological data from the second generation of the Kunlun Automated Weather Station (KLAWS-2G) at Dome A, Antarctica during 2015 and 2016. We find that a strong temperature inversion exists for all the elevations up to 14 m that KLAWS-2G can reach, and lasts for more than 10 hours for 50% or more of the time when temperature inversion occurs. The average wind speeds at 4 m elevation are 4.2 m/s and 3.8 m/s during 2015 and 2016, respectively. The strong temperature inversion and moderate wind speed lead to a shallow turbulent boundary layer height at Dome A. By analyzing the temperature and wind shear profiles, we note telescopes should be elevated by at least 8 m above the ice. We also find that the duration of temperature
قيم البحث
اقرأ أيضاً
Over the past few years a major effort has been put into the exploration of potential sites for the deployment of submillimetre astronomical facilities. Amongst the most important sites are Dome C and Dome A on the Antarctic Plateau, and the Chajnant
or area in Chile. In this context, we report on measurements of the sky opacity at 200 um over a period of three years at the French-Italian station, Concordia, at Dome C, Antarctica. We also present some solutions to the challenges of operating in the harsh polar environ- ment. Dome C offers exceptional conditions in terms of absolute atmospheric transmission and stability for submillimetre astron- omy. Over the austral winter the PWV exhibits long periods during which it is stable and at a very low level (0.1 to 0.3 mm). Higher values (0.2 to 0.8 mm) of PWV are observed during the short summer period. Based on observations over three years, a transmission of around 50% at 350 um is achieved for 75% of the time. The 200-um window opens with a typical transmission of 10% to 15% for 25% of the time. Dome C is one of the best accessible sites on Earth for submillimetre astronomy. Observations at 350 or 450 {mu}m are possible all year round, and the 200-um window opens long enough and with a sufficient transparency to be useful. Although the polar environment severely constrains hardware design, a permanent observatory with appropriate technical capabilities is feasible. Because of the very good astronomical conditions, high angular resolution and time series (multi-year) observations at Dome C with a medium size single dish telescope would enable unique studies to be conducted, some of which are not otherwise feasible even from space.
Seeing, the angular size of stellar images blurred by atmospheric turbulence, is a critical parameter used to assess the quality of astronomical sites. Median values at the best mid-latitude sites are generally in the range of 0.6--0.8,arcsec. Sites
on the Antarctic plateau are characterized by comparatively-weak turbulence in the free-atmosphere above a strong but thin boundary layer. The median seeing at Dome C is estimated to be 0.23--0.36 arcsec above a boundary layer that has a typical height of 30,m. At Dome A and F, the only previous seeing measurements were made during daytime. Here we report the first direct measurements of night-time seeing at Dome A, using a Differential Image Motion Monitor. Located at a height of just 8,m, it recorded seeing as low as 0.13,arcsec, and provided seeing statistics that are comparable to those for a 20,m height at Dome C. It indicates that the boundary layer was below 8,m 31% of the time. At such times the median seeing was 0.31,arcsec, consistent with free-atmosphere seeing. The seeing and boundary layer thickness are found to be strongly correlated with the near-surface temperature gradient. The correlation confirms a median thickness of approximately 14,m for the boundary layer at Dome A, as found from a sonic radar. The thinner boundary layer makes it less challenging to locate a telescope above it, thereby giving greater access to the free-atmosphere.
The 0.5,m Antarctic Survey Telescopes (AST3) were designed for time-domain optical/infrared astronomy. They are located in Dome~A, Antarctica, where they can take advantage of the continuous dark time during winter. Since the site is unattended in wi
nter, everything for the operation, from observing to data reduction, had to be fully automated. Here, we present a brief overview of the AST3 project and some of its unique characteristics due to its location in Antarctica. We summarise the various components of the survey, including the customized hardware and software, that make complete automation possible.
Dome A, Antarctica has been thought to be one of the best astronomical sites on the earth since decades ago. From it was first visited by astronomers in 2008, dozens of facilities for astronomical observation and site testing were deployed. Due to it
s special geographical location, the data and message exchange between Dome A and the domestic control center could only depend on Iridium. Because the link bandwidth of Iridium is extremely limited, meanwhile the network traffic cost is quite expensive and the network is rather unstable, the commonly used data transfer tools, such as rsync and scp, are not suitable in this case. In this paper, we design and implement a data transfer tool called NBFTP (narrow bandwidth file transfer protocol) for the astronomical observation of Dome A. NBFTP uses a uniform interface to arrange all types of data and matches specific transmission schemes for different data types according to rules. Break-point resuming and extensibility functions are also implemented. Our experimental results show that NBFTP consumes 60% less network traffic than rsync when detecting the data pending to be transferred. And when transferring small files of 1KB, the network traffic consumption of NBFTP is 40% less than rsync. However, as the file size increases, the network traffic consumption of NBFTP tends to approach rsync, but it is still smaller than rsync.
The three Antarctic Survey Telescopes (AST3) aim to carry out time domain imaging survey at Dome A, Antarctica. The first of the three telescopes (AST3-1) was successfully deployed on January 2012. AST3-1 is a 500,mm aperture modified Schmidt telesco
pe with a 680,mm diameter primary mirror. AST3-1 is equipped with a SDSS $i$ filter and a 10k $times$ 10k frame transfer CCD camera, reduced to 5k $times$ 10k by electronic shuttering, resulting in a 4.3 deg$^2$ field-of-view. To verify the capability of AST3-1 for a variety of science goals, extensive commissioning was carried out between March and May 2012. The commissioning included a survey covering 2000 deg$^2$ as well as the entire Large and Small Magellanic Clouds. Frequent repeated images were made of the center of the Large Magellanic Cloud, a selected exoplanet transit field, and fields including some Wolf-Rayet stars. Here we present the data reduction and photometric measurements of the point sources observed by AST3-1. We have achieved a survey depth of 19.3,mag in 60 s exposures with 5,mmag precision in the light curves of bright stars. The facility achieves sub-mmag photometric precision under stable survey conditions, approaching its photon noise limit. These results demonstrate that AST3-1 at Dome A is extraordinarily competitive in time-domain astronomy, including both quick searches for faint transients and the detection of tiny transit signals.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
