اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدLimiting scattering processes in high-mobility InSb quantum wells grown on GaSb buffer systems
66
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present molecular beam epitaxial grown single- and double-side $delta$-doped InAlSb/InSb quantum wells with varying distances down to 50 nm to the surface on GaSb metamorphic buffers. We analyze the surface morphology as well as the impact of the crystalline quality on the electron transport. Comparing growth on GaSb and GaAs substrates indicates that the structural integrity of our InSb quantum wells is solely determined by the growth conditions at the GaSb/InAlSb transition and the InAlSb barrier growth. The two-dimensional electron gas samples show high mobilities of up to 349 000 cm$^2$/Vs at cryogenic temperatures and 58 000 cm$^2$/Vs at room temperature. With the calculated Dingle ratio and a transport lifetime model, ionized impurities predominantly remote from the quantum well are identified as the dominant source of scattering events. The analysis of the well pronounced Shubnikov$-$de Haas oscillations reveals a high spin-orbit coupling with an effective $g$-factor of $-38.4$ in our samples. Along with the smooth surfaces and long mean free paths demonstrated, our InSb quantum wells are increasingly competitive for nanoscale implementations of Majorana mode devices.
قيم البحث
اقرأ أيضاً
InAs-based two-dimensional electron systems grown on lattice mismatched InP substrates offer a robust platform for the pursuit of topologically protected quantum computing. We investigated strained composite quantum wells of In$_{0.75}$Ga$_{0.25}$As/
InAs/In$_{0.75}$Ga$_{0.25}$As with In$_{0.75}$Al$_{0.25}$As barriers. By optimizing the widths of the In$_{0.75}$Ga$_{0.25}$As layers, the In$_{0.75}$Al$_{0.25}$As barrier, and the InAs quantum well we demonstrate mobility in excess of $1 times 10^{6},$cm$^{2}/$Vs. Mobility vs. density data indicates that scattering is dominated by a residual three dimensional distribution of charged impurities. We extract the Rashba parameter and spin-orbit length as important material parameters for investigations involving Majorana zero modes.
Near-surface InAs two-dimensional electron gas (2DEG) systems have great potential for realizing networks of multiple Majorana zero modes towards a scalable topological quantum computer. Improving mobility in the near-surface 2DEGs is beneficial for
stable topological superconducting states as well as for correlation of multiple Majorana zero modes in a complex network. Here, we investigate near-surface InAs 2DEGs (13 nm away from the surface) grown on GaSb(001) substrates, whose lattice constant is closely matched to InAs, by molecular beam epitaxy. The effect of 10-nm-thick top barrier to the mobility is studied by comparing Al$_{0.9}$Ga$_{0.1}$Sb and In$_{0.75}$Ga$_{0.25}$As as a top barrier on otherwise identical InAs quantum wells grown with identical bottom barrier and buffer layers. A 3-nm-thick capping layer on Al$_{0.9}$Ga$_{0.1}$Sb top barrier also affects the 2DEG electronic transport properties by modifying scattering from 2D remote ionized impurities at the surface. The highest transport mobility of 650,000 cm$^2$/Vs with an electron density of 3.81 $times$ 10$^{11}$ cm$^{-2}$ was observed in an InAs 2DEG with an Al$_{0.9}$Ga$_{0.1}$Sb top barrier and an In$_{0.75}$Ga$_{0.25}$As capping layer. Analysis of Shubnikov-de Haas oscillations in the high mobility sample suggests that long-range scattering, such as remote ionized impurity scattering, is the dominant scattering mechanism in the InAs 2DEGs grown on GaSb(001) substrates. In comparison to InAs quantum wells grown on lattice-mismatched InP, the ones grown on GaSb show smoother surface morphology and higher quantum mobility. However, In$_{0.75}$Ga$_{0.25}$As top barrier in InAs quantum well grown on GaSb limits the transport mobility by charged dislocations formed in it, in addition to the major contribution to scattering from the alloy scattering.
The transfer of graphene grown by chemical vapor deposition (CVD) using amorphous polymers represents a widely implemented method for graphene-based electronic device fabrication. However, the most commonly used polymer, poly(methyl methacrylate) (PM
MA), leaves a residue on the graphene that limits the mobility. Here we report a method for graphene transfer and patterning that employs a perfluoropolymer---Hyflon---as a transfer handle and to protect graphene against contamination from photoresists or other polymers. CVD-grown graphene transferred this way onto LaAlO$_3$/SrTiO$_3$ heterostructures is atomically clean, with high mobility (~30,000 cm$^2$V$^{-1}$s$^{-1}$) near the Dirac point at 2 K and clear, quantized Hall and magneto-resistance. Local control of the LaAlO$_3$/SrTiO$_3$ interfacial metal-insulator transition---through the graphene---is preserved with this transfer method. The use of perfluoropolymers such as Hyflon with CVD-grown graphene and other 2D materials can readily be implemented with other polymers or photoresists.
By inserting a SrZrO$_3$ buffer layer between the film and the substrate, we demonstrate a significant reduction of the threading dislocation density with an associated improvement of the electron mobility in La:BaSnO$_3$ films. A room temperature mo
bility of 140 cm$^2$ V$^{-1}text{s}^{-1}$ is achieved for 25-nm-thick films without any post-growth treatment. The density of threading dislocations is only $4.9times 10^{9}$ cm$^{-2}$ for buffered films prepared on (110) TbScO$_3$ substrates by pulsed laser deposition.
We report time resolved measurements of spin relaxation in doped and undoped InSb quantum wells using degenerate and two-color magneto-optical Kerr effect techniques. We observed that the photo-excited spin dynamics are strongly influenced by laser e
xcitation fluence and the doping profile of the samples. In the low fluence regime, an oscillatory pattern was observed at low temperatures ($leq$ 77 K) in the samples with an asymmetric doping profile which might be attributed to the quasi-collision-free spin relaxation regime. Our measurements also suggest the influence of the barrier materials (Al$_{x}$In$_{1-x}$Sb) on the spin relaxation in these material systems.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
