اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCalculations of point defects in the layered MX2 (M=Mo, W; X=S, Te): Substitution by the groups III, V and VII elements
150
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Dopability in semiconductors plays a crucial role in device performance. Using the first-principles density-functional theory calculations, we investigate systematically the doping properties of layered MX2 (M= Mo, W; X=S, Te) by replacing M or X with the groups III, V and VII elements. It is found that the defect BM is hard to form in MX2 due to the large formation energy originating from the crystal distortion, while AlM is easy to realize compared to the former. In MoS2, WS2 and MoTe2, Al is the most desirable p-type dopant under anion-rich conditions among the group III components, since AlM has relatively low transition and formation energies. With respect to the doping of the group V elements, it is found that the substitutions on the cation sites have deeper defect levels than those on the anion sites due to the strong electronegativity. AsTe and SbTe in MoTe2 and WTe2 are trend to form shallow acceptors under cation-rich conditions, indicating high hole-concentrations for p-type doping, whereas SbS in MoS2 and PTe in WTe2 are shown to be good p-type candidates under cation-rich conditions. In despite of that the substitutions of group VII on X site have low formation energies, the transition energies are too high to achieve n-type MoS2 and WS2. Nevertheless, for MoTe2, the substitutions with the group VII elements on the anion sites are suitable for n-type doping on account of the shallow donor levels and low formation energies under Mo-rich condition. As to WTe2, F is the only potential donor due to the shallow transition energy of FTe. Our findings of filtering out unfavorable and identifying favorable dopants in MX2 are very valuable for experimental implementations.
قيم البحث
اقرأ أيضاً
The composition dependence of the structural transition between the monoclinic 1T$^{prime}$ and orthorhombic T$_{d}$ phases in the Mo$_{1-x}$W$_{x}$Te$_{2}$ Weyl semimetal was investigated by elastic neutron scattering on single crystals up to $x app
rox 0.54$. First observed in MoTe$_{2}$, the transition from T$_{d}$ to 1T$^{prime}$ is accompanied by an intermediate pseudo-orthorhombic phase, T$_{d}^{*}$. Upon doping with W, the T$_{d}^{*}$ phase vanishes by $x approx 0.34$. Above this concentration, a phase coexistence behavior with both T$_{d}$ and 1T$^{prime}$ is observed instead. The interlayer in-plane positioning parameter $delta$, which relates to the 1T$^{prime}$ $beta$ angle, decreases with temperature as well as with W substitution, likely due to strong anharmonicity in the interlayer interactions. The temperature width of the phase coexistence remains almost constant up to $x approx 0.54$, in contrast to the broadening reported under pressure.
Lead and tin chalcogenides have been studied widely due to their promising thermoelectric (TE) properties. Further enhancement in their TE efficiency has been reported upon the reduction of the dimension, which is an important feature in modern devic
e fabrications. Using density functional theory combined with the Semi-classical Boltzmann transport theory, we studied the structural, electronic and TE properties of two-dimensional (2D) MX (M = Sn, Pb; X = S, Te) monolayers. Spin-orbit coupling was found to have significant effects on their electronic structure, particularly for the heavy compounds. Structural optimization followed by phonon transport studies prevailed that the rectangular ({gamma}-) phase is energetically the most favorable for SnS and SnTe monolayers, whereas the square structure is found the most stable for PbS and PbTe monolayers. Our results are in good agreement with previous studies. These 2D materials exhibit high Seebeck coefficients and power factors along with low lattice thermal conductivities, which are essential features of good TE materials. The maximum figure of merits (ZT) of 1.04, 1.46, 1.51 and 1.94 are predicted for n-type SnS, SnTe, PBS and p-type PbTe monolayers respectively at 700 K, which are higher than their bulk ZT values. Hence, these monolayers are promising candidates for TE applications.
The structural polymorphism in transition metal dichalcogenides (TMDs) provides exciting opportunities for developing advanced electronics. For example, MoTe$_2$ crystallizes in the 2H semiconducting phase at ambient temperature and pressure, but tra
nsitions into the 1T$^prime$ semimetallic phase at high temperatures. Alloying MoTe$_2$ with WTe$_2$ reduces the energy barrier between these two phases, while also allowing access to the T$_d$ Weyl semimetal phase. The MoWTe$_2$ alloy system is therefore promising for developing phase change memory technology. However, achieving this goal necessitates a detailed understanding of the phase composition in the MoTe$_2$-WTe$_2$ system. We combine polarization-resolved Raman spectroscopy with X-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) to study MoWTe$_2$ alloys over the full compositional range x from 0 to 1. We identify Raman and XRD signatures characteristic of the 2H, 1T$^prime$, and T$_d$ structural phases that agree with density-functional theory (DFT) calculations, and use them to identify phase fields in the MoTe$_2$-WTe$_2$ system, including single-phase 2H, 1T$^prime$, and T$_d$ regions, as well as a two-phase 1T$^prime$ + T$_d$ region. Disorder arising from compositional fluctuations in MoWTe$_2$ alloys breaks inversion and translational symmetry, leading to the activation of an infrared 1T$^prime$-MoTe$_2$ mode and the enhancement of a double-resonance Raman process in 2H-MoWTe$_2$ alloys. Compositional fluctuations limit the phonon correlation length, which we estimate by fitting the observed asymmetric Raman lineshapes with a phonon confinement model. These observations reveal the important role of disorder in MoWTe$_2$ alloys, clarify the structural phase boundaries, and provide a foundation for future explorations of phase transitions and electronic phenomena in this system.
First-principle calculations with different exchange-correlation functionals, including LDA, PBE and vdW-DF functional in form of optB88-vdW, have been performed to investigate the electronic and elastic properties of two dimensional transition metal
dichalcogenides(TMDCs) with the formula of MX$_2$(M=Mo,W; X=O,S,Se,Te) in both monolayer and bilayer structures. The calculated band structures show a direct band gap for monolayer TMDCs at the K point except for MoO$_2$ and WO$_2$. When the monolayers are stacked into bilayer, the reduced indirect band gaps are found except for bilayer WTe$_2$, in which direct gap is still present at the K point. The calculated in-plane Young moduli are comparable to graphene, which promises the possible application of TMDCs in future flexible and stretchable electronic devices. We also evaluated the performance of different functionals including LDA, PBE, and optB88-vdW in describing elastic moduli of TMDCs and found that LDA seems to be the most qualified method. Moreover, our calculations suggest that the Young moduli for bilayers are insensitive to stacking orders and the mechanical coupling between monolayers seems to be negligible.
Based on the density functional theory with hybrid functional approach, we have studied the structural and thermodynamic stabilities of Cu2MSnX4 (M = Zn, Mg, and Ca; X = S and Se) alloy, and have further investigated the electronic and optical proper
ties of stable Cu2MgSnS4 and Cu2MgSnSe4 phases. Thermal stability analysis indicates that Cu2MgSnS4 and Cu2MgSnSe4 are thermodynamically stable, while Cu2CaSnS4 and Cu2CaSnSe4 are unstable. The ground state configuration of the compound changes from kesterite into stannite structure when Zn atoms are substitued by larger Mg or Ca atoms. An energy separation between stannite and kesterite phase similar to that of CZTS is observed. Calculated electronic structures and optical properties suggest that Cu2MgSnS4 and Cu2MgSnSe4 can be efficient photovoltaic materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
