اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCost-optimal design of a simplified highly renewable Chinese electricity network
88
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Rapid economic growth in China has lead to an increasing energy demand in the country. In combination with Chinas emission control and clean air initiatives, it has resulted in large-scale expansion of the leading renewable energy technologies, wind and solar power. Their intermittent nature and uneven geographic distribution, however, raises the question of how to best exploit them in a future sustainable electricity system, where their combined production may very well exceed that of all other technologies. It is well known that interconnecting distant regions provides more favorable production patterns from wind and solar. On the other hand, long-distance connections challenge traditional local energy autonomy. In this paper, the advantage of interconnecting the contiguous provinces of China is quantified. To this end, two different methodologies are introduced. The first aims at gradually increasing heterogeneity, that is non-local wind and solar power production, to minimize production costs without regard to the match between production and demand. The second method optimizes the trade-off between low cost production and high utility value of the energy. In both cases, the study of a 100% renewable Chinese electricity network is based on 8 years of high-resolution hourly time series of wind and solar power generation and electricity demand for each of the provinces. From the study we conclude that compared to a baseline design of homogeneously distributed renewable capacities, a heterogeneous network not only lowers capital investments but also reduces backup dispatches from thermal units. Installing more capacity in provinces like Inner Mongolia, Jiangsu, Hainan and north-western regions, heterogeneous layouts may lower the levelized cost of electricity (LCOE) by up to 27%, and reduce backup needs by up to 64%.
قيم البحث
اقرأ أيضاً
Ambitious targets for renewable energy and CO2 taxation both represent political instruments for decarbonisation of the energy system. We model a high number of coupled electricity and heating systems, where the primary sources of CO2 neutral energy
are from variable renewable energy sources (VRES), i.e., wind and solar generators. The model includes hourly dispatch of all technologies for a full year for every country in Europe. In each model run, the amount of renewable energy and the level of CO2 tax are fixed exogenously, while the cost-optimal composition of energy generation, conversion, transmission and storage technologies and the corresponding CO2 emissions are calculated. We show that even for high penetrations of VRES, a significant CO2 tax of more than 100 euro/tCO2 is required to limit the combined CO2 emissions from the sectors to less than 5% of 1990 levels, because curtailment of VRES, combustion of fossil fuels and inefficient conversion technologies are economically favoured despite the presence of abundant VRES. A sufficiently high CO2 tax results in the more efficient use of VRES by means of heat pumps and hot water storage, in particular. We conclude that a renewable energy target on its own is not sufficient; in addition, a CO2 tax is required to decarbonise the electricity and heating sectors and incentivise the least cost combination of flexible and efficient energy conversion and storage.
The generation of synthetic natural gas from renewable electricity enables long-term energy storage and provides clean fuels for transportation. In this article, we analyze fully renewable Power-to-Methane systems using a high-resolution energy syste
m optimization model applied to two regions within Europe. The optimum system layout and operation depend on the availability of natural resources, which vary between locations and years. We find that much more wind than solar power is used, while the use of an intermediate battery electric storage system has little effects. The resulting levelized costs of methane vary between 0.24 and 0.30 Euro/kWh and the economic optimal utilization rate between 63% and 78%. We further discuss how the economic competitiveness of Power-to-Methane systems can be improved by the technical developments and by the use of co-products, such as oxygen and curtailed electricity. A sensitivity analysis reveals that the interest rate has the highest influence on levelized costs, followed by the investment costs for wind and electrolyzer stack.
Hierarchical structures are ubiquitous in human and animal societies, but a fundamental understanding of their raison d^etre has been lacking. Here, we present a general theory in which hierarchies are obtained as the optimal design that strikes a ba
lance between the benefits of group productivity and the costs of communication for coordination. By maximising a generic representation of the output of a hierarchical organization with respect to its design, the optimal configuration of group sizes at different levels can be determined. With very few ingredients, a wide variety of hierarchically ordered complex organisational structures can be derived. Furthermore, our results rationalise the ubiquitous occurrence of triadic hierarchies, i.e., of the universal preferred scaling ratio between $3$ and $4$ found in many human and animal hierarchies, which should occur according to our theory when production is rather evenly contributed by all levels. We also provide a systematic approach for optimising team organisation, helping to address the question of the optimal `span of control. The significantly larger number $sim 3-20$ of subordinates a supervisor typically manages is rationalised to occur in organisations where the production is essentially done at the bottom level and in which the higher levels are only present to optimise coordination and control.
Many robotics domains use some form of nonconvex model predictive control (MPC) for planning, which sets a reduced time horizon, performs trajectory optimization, and replans at every step. The actual task typically requires a much longer horizon tha
n is computationally tractable, and is specified via a cost function that cumulates over that full horizon. For instance, an autonomous car may have a cost function that makes a desired trade-off between efficiency, safety, and obeying traffic laws. In this work, we challenge the common assumption that the cost we optimize using MPC should be the same as the ground truth cost for the task (plus a terminal cost). MPC solvers can suffer from short planning horizons, local optima, incorrect dynamics models, and, importantly, fail to account for future replanning ability. Thus, we propose that in many tasks it could be beneficial to purposefully choose a different cost function for MPC to optimize: one that results in the MPC rollout having low ground truth cost, rather than the MPC planned trajectory. We formalize this as an optimal cost design problem, and propose a zeroth-order optimization-based approach that enables us to design optimal costs for an MPC planning robot in continuous MDPs. We test our approach in an autonomous driving domain where we find costs different from the ground truth that implicitly compensate for replanning, short horizon, incorrect dynamics models, and local minima issues. As an example, the learned cost incentivizes MPC to delay its decision until later, implicitly accounting for the fact that it will get more information in the future and be able to make a better decision. Code and videos available at https://sites.google.com/berkeley.edu/ocd-mpc/.
The increasing attention to environmental issues is forcing the implementation of novel energy models based on renewable sources, fundamentally changing the configuration of energy management and introducing new criticalities that are only partly und
erstood. In particular, renewable energies introduce fluctuations causing an increased request of conventional energy sources oriented to balance energy requests on short notices. In order to develop an effective usage of low-carbon sources, such fluctuations must be understood and tamed. In this paper we present a microscopic model for the description and the forecast of short time fluctuations related to renewable sources and to their effects on the electricity market. To account for the inter-dependencies among the energy market and the physical power dispatch network, we use a statistical mechanics approach to sample stochastic perturbations on the power system and an agent based approach for the prediction of the market players behavior. Our model is a data-driven; it builds on one day ahead real market transactions to train agents behaviour and allows to infer the market share of different energy sources. We benchmark our approach on the Italian market finding a good accordance with real data.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
