اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTowards Space-like Photometric Precision from the Ground with Beam-Shaping Diffusers
75
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We demonstrate a path to hitherto unachievable differential photometric precisions from the ground, both in the optical and near-infrared (NIR), using custom-fabricated beam-shaping diffusers produced using specialized nanofabrication techniques. Such diffusers mold the focal plane image of a star into a broad and stable top-hat shape, minimizing photometric errors due to non-uniform pixel response, atmospheric seeing effects, imperfect guiding, and telescope-induced variable aberrations seen in defocusing. This PSF reshaping significantly increases the achievable dynamic range of our observations, increasing our observing efficiency and thus better averages over scintillation. Diffusers work in both collimated and converging beams. We present diffuser-assisted optical observations demonstrating $62^{+26}_{-16}$ppm precision in 30 minute bins on a nearby bright star 16-Cygni A (V=5.95) using the ARC 3.5m telescope---within a factor of $sim$2 of Keplers photometric precision on the same star. We also show a transit of WASP-85-Ab (V=11.2) and TRES-3b (V=12.4), where the residuals bin down to $180^{+66}_{-41}$ppm in 30 minute bins for WASP-85-Ab---a factor of $sim$4 of the precision achieved by the K2 mission on this target---and to 101ppm for TRES-3b. In the NIR, where diffusers may provide even more significant improvements over the current state of the art, our preliminary tests have demonstrated $137^{+64}_{-36}$ppm precision for a $K_S =10.8$ star on the 200 Hale Telescope. These photometric precisions match or surpass the expected photometric precisions of TESS for the same magnitude range. This technology is inexpensive, scalable, easily adaptable, and can have an important and immediate impact on the observations of transits and secondary eclipses of exoplanets.
قيم البحث
اقرأ أيضاً
The Transiting Exoplanet Survey Satellite (TESS, launched early 2018) is expected to find a multitude of new transiting planet candidates around the nearest and brightest stars. Timely high-precision follow-up observations from the ground are essenti
al in confirming and further characterizing the planet candidates that TESS will find. However, achieving extreme photometric precisions from the ground is challenging, as ground-based telescopes are subject to numerous deleterious atmospheric effects. Beam-shaping diffusers are emerging as a low-cost technology to achieve hitherto unachievable differential photometric precisions from the ground. These diffusers mold the focal plane image of a star into a broad and stable top-hat shape, minimizing photometric errors due to non-uniform pixel response, atmospheric seeing effects, imperfect guiding, and telescope-induced variable aberrations seen in defocusing. In this paper, we expand on our previous work (Stefansson et al. 2017; Stefansson et al. 2018 [submitted]), providing a further detailed discussion of key guidelines when sizing a diffuser for use on a telescope. Furthermore, we present our open source Python package iDiffuse which can calculate the expected PSF size of a diffuser in a telescope system, along with its expected on-sky diffuser-assisted photometric precision for a host star of a given magnitude. We use iDiffuse to show that most ($sim$80%) of the planet hosts that TESS will find will be scintillation limited in transit observations from the ground. Although iDiffuse has primarily been developed to plan challenging transit observations using the diffuser on the ARCTIC imager on the ARC 3.5m Telescope at Apache Point observatory, iDiffuse is modular and can be easily extended to calculate the expected diffuser-assisted photometric precisions on other telescopes.
Direct exoplanet spectroscopy aims to measure the spectrum of an exoplanet while simultaneously minimizing the light collected from its host star. Isolating the planet light from the starlight improves the signal-to-noise ratio (S/N) per spectral cha
nnel when noise due to the star dominates, which may enable new studies of the exoplanet atmosphere with unprecedented detail at high spectral resolution (>30,000). However, the optimal instrument design depends on the flux level from the planet and star compared to the noise due to other sources, such as detector noise and thermal background. Here we present the design, fabrication, and laboratory demonstration of specially-designed optics to improve the S/N in two potential regimes in direct exoplanet spectroscopy with adaptive optics instruments. The first is a pair of beam-shaping lenses that increase the planet signal by improving the coupling efficiency into a single-mode fiber at the known position of the planet. The second is a grayscale apodizer that reduces the diffracted starlight for planets at small angular separations from their host star. The former especially increases S/N when dominated by detector noise or thermal background, while the latter helps reduce stellar noise. We show good agreement between the theoretical and experimental point spread functions in each case and predict the exposure time reduction ($sim 33%$) that each set of optics provides in simulated observations of 51 Eridani b using the Keck Planet Imager and Characterizer instrument at W.M. Keck Observatory.
Because of the recent technological advances, the key technologies needed for precision space optical astrometry are now in hand. The Microarcsecond Astrometry Probe (MAP) mission concept is designed to find 1 Earth mass planets at 1AU orbit (scaled
to solar luminosity) around the nearest ~90 FGK stars. The MAP payload includes i) a single three-mirror anastigmatic telescope with a 1-m primary mirror and metrology subsystems, and ii) a camera. The camera focal plane consists of 42 detectors, providing a Nyquist sampled FOV of 0.4-deg. Its metrology subsystems ensure that MAP can achieve the 0.8 uas astrometric precision in 1 hr, which is required to detect Earth-like exoplanets in our stellar neighborhood. MAP mission could provide ~10 specific targets for a much larger coronagraphic mission that would measure its spectra. We argue for the development of the space astrometric missions capable of finding Earth-2.0. Given the current technology readiness such missions relying on precision astrometry could be flown in the next decade, perhaps in collaboration with other national space agencies.
The Characterising Exoplanet Satellite (CHEOPS) is a space mission designed to perform photometric observations of bright stars to obtain precise radii measurements of transiting planets. The high-precision photometry of CHEOPS relies on careful on-g
round calibration of its payload. For that purpose, intensive pre-launch campaigns of measurements were carried out to calibrate the instrument and characterise its photometric performances. We report on main results of these campaigns, provide a complete analysis of data sets and estimate in-flight photometric performance by mean of end-to-end simulation. The on-ground photometric stability of the instrument is found to be of the order of 15 parts per million over 5 hours. Our end-to-end simulation shows that measurements of planet-to-star radii ratio with CHEOPS can be determined with a precision of 2% for a Neptune-size planet transiting a K-dwarf star and 5% for an Earth-size planet orbiting a Sun-like star. It corresponds to signal-to-noise ratios on the transit depths of 25 and 10 respectively, allowing the characterisation and detection of these planets. The pre-launch CHEOPS performances are shown to be compliant with the mission requirements.
Direct detection and characterization of Earth-like planets around Sun-like stars is a core task for evaluating the prevalence of habitability and life in the Universe. Here, we discuss a promising option for achieving this goal, which is based on pl
acing an occulter in orbit and having it project its shadow onto the E- ELT at the surface of Earth, thus providing a sufficient contrast for imaging and taking spectra of Earth-like planets in the habitable zones of Sun-like stars. Doing so at a sensible fuel budget will require tailored orbits, an occulter with a high area-to-mass ratio, and appropriate instrumentation at the E-ELT. In this White Paper, submitted in response to the ESA Voyage 2050 Call, we outline the fundamental aspects of the concept, and the most important technical developments that will be required to develop a full mission.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
