اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDifferential voltage amplification from ferroelectric negative capacitance
111
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
It is well known that one needs an external source of energy to provide voltage amplification. Because of this, conventional circuit elements such as resistors, inductors or capacitors cannot provide amplification all by themselves. Here, we demonstrate that a ferroelectric can cause a differential amplification without needing such an external energy source. As the ferroelectric switches from one polarization state to the other, a transfer of energy takes place from the ferroelectric to the dielectric, determined by the ratio of their capacitances, which, in turn, leads to the differential amplification. {This amplification is very different in nature from conventional inductor-capacitor based circuits where an oscillatory amplification can be observed. The demonstration of differential voltage amplification from completely passive capacitor elements only, has fundamental ramifications for next generation electronics.
قيم البحث
اقرأ أيضاً
The pressing quest for overcoming Boltzmann tyranny in low-power nanoscale electronics revived the thoughts of engineers of early 1930-s on the possibility of negative circuit constants. The concept of the ferroelectric-based negative capacitance (NC
) devices triggered explosive activity in the field. However, most of the research addressed transient NC, leaving the basic question of the existence of the steady-state NC unresolved. Here we demonstrate that the ferroelectric nanodot capacitor hosts a stable two-domain state realizing the static reversible NC device thus opening routes for the extensive use of the NC in domain wall-based nanoelectronics.
Integrating negative capacitance (NC) into the field-effect transistors promises to break fundamental limits of power dissipation known as Boltzmann tyranny. However, realization of the stable static negative capacitance in the non-transient regime w
ithout hysteresis remains a daunting task. Here we show that the failure to implement the NC stems from the lack of understanding that its origin is fundamentally related with the inevitable emergence of the domain state. We put forth an ingenious design for the ferroelectric domain-based field-effect transistor with the stable reversible static negative capacitance. Using dielectric coating of the ferroelectric capacitor enables the tunability of the negative capacitance improving tremendously the performance of the field-effect transistors.
Negative capacitance (NC) in ferroelectrics, which stems from the imperfect screening of polarization, is considered a viable approach to lower voltage operation in the field-effect transistors (FETs) used in logic switches. In this paper, we discuss
the implications of the transient nature of negative capacitance for its practical application. It is suggested that the NC effect needs to be characterized at the proper time scale to identify the type of circuits where functional NC-FETs can be used effectively.
We investigate the thermal transport properties of a temperature-biased Josephson tunnel junction composed of two different superconductors. We show that this simple system can provide a large negative differential thermal conductance (NDTC) with a p
eak-to-valley ratio of $sim 3$ in the transmitted electronic heat current. The NDTC is then exploited to outline the caloritronic analogue of the tunnel diode, which can exhibit a modulation of the output temperature as large as 80 mK at a bath temperature of 50 mK. Moreover, this device may work in a regime of thermal hysteresis that can be used to store information as a thermal memory. On the other hand, the NDTC effect offers the opportunity to conceive two different designs of a thermal transistor, which might operate as a thermal switch or as an amplifier/modulator. The latter shows a heat amplification factor $>1$ in a 500-mK-wide working region of the gate temperature. After the successful realization of heat interferometers and thermal diodes, this kind of structures would complete the conversion of the most important electronic devices in their thermal counterparts, breaking ground for coherent caloritronics nanocircuits where heat currents can be manipulated at will.
We present a thorough analysis of the foundations of models of stabilization of negative capacitance (NC) in a ferroelectric (FE) layer by capacitance matching to a dielectric layer, which claim that the FE is stabilized in a low polarization state w
ithout FE polarization switching (non-switching), showing that the concept is fundamentally flawed and unphysical. We also analyze experimental evidence concluding that there is no data supporting the need to invoke such stabilization; rather, conventional models of ferroelectric polarization switching suffice to account for the effects observed. We analyze experimental evidence that at least in some of the model systems for which this effect has been claimed, categorically rule out stabilized non-switching NC. Microscopic measurements recently published as supporting non-switching stabilized NC actually rule them out, since the ferroelectric in a stack sandwiched between two dielectric layers was found to be in a mixed domain state (high polarizations within each domain) rather than in the low polarization state predicted by non-switching stabilized NC models. Nonetheless, since stabilized NC (corresponding to a minimum in free energy) is not physically impossible, it would be useful to move the research efforts to investigating scenarios and systems in which this effect is possible and expected and assess whether they are useful and practical for low power electronics.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
