ترغب بنشر مسار تعليمي؟ اضغط هنا

The Flying Saucer: Tomography of the thermal and density gas structure of an edge-on protoplanetary disk

123   0   0.0 ( 0 )
 نشر من قبل Anne Dutrey
 تاريخ النشر 2017
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Determining the gas density and temperature structures of protoplanetary disks is a fundamental task to constrain planet formation theories. This is a challenging procedure and most determinations are based on model-dependent assumptions. We attempt a direct determination of the radial and vertical temperature structure of the Flying Saucer disk, thanks to its favorable inclination of 90 degrees. We present a method based on the tomographic study of an edge-on disk. Using ALMA, we observe at 0.5$$ resolution the Flying Saucer in CO J=2-1 and CS J=5-4. This edge-on disk appears in silhouette against the CO J=2-1 emission from background molecular clouds in $rho$ Oph. The combination of velocity gradients due to the Keplerian rotation of the disk and intensity variations in the CO background as a function of velocity provide a direct measure of the gas temperature as a function of radius and height above the disk mid-plane. The overall thermal structure is consistent with model predictions, with a cold ($< 15-12 $~K), CO-depleted mid-plane, and a warmer disk atmosphere. However, we find evidence for CO gas along the mid-plane beyond a radius of about 200,au, coincident with a change of grain properties. Such a behavior is expected in case of efficient rise of UV penetration re-heating the disk and thus allowing CO thermal desorption or favoring direct CO photo-desorption. CO is also detected up to 3-4 scale heights while CS is confined around 1 scale height above the mid-plane. The limits of the method due to finite spatial and spectral resolutions are also discussed. This method appears to be very promising to determine the gas structure of planet-forming disks, provided that the molecular data have an angular resolution which is high enough, of the order of $0.3 - 0.1$ at the distance of the nearest star forming regions.



قيم البحث

اقرأ أيضاً

High-resolution observations of edge-on proto-planetary disks in emission from molecular species sampling different critical densities and formation pathways offer the opportunity to trace the vertical chemical and physical structures of protoplaneta ry disks. Based on analysis of sub-arcsecond resolution Atacama Large Millimeter Array (ALMA) archival data for the edge-on Flying Saucer disk (2MASS J16281370-2431391), we establish the vertical and radial differentiation of the disk CN emitting regions with respect to those of $^{12}$CO and CS, and we model the disk physical conditions from which the CN emission arises. We demonstrate that the disk $^{12}$CO (2-1), CN (2-1), and CS J=5-4 emitting regions decrease in scale height above the midplane, such that 12CO, CN, and CS trace layers of increasing density and decreasing temperature. We find that at radii > 100 au from the central star, CN emission arises predominantly from intermediate layers, while in the inner region of the disk, CN appears to arise from layers closer to the midplane. We investigate disk physical conditions within the CN emitting regions, as well as the ranges of CN excitation temperature and column density, via RADEX non-LTE modeling of the three brightest CN hyperfine lines. Near the disk midplane, where we derive densities nH2 ~10$^{7}$ cm$^{-3}$ at relatively low T$_{kin}$ (~12 K), we find that CN is thermalized, while sub-thermal, non-LTE conditions appear to obtain for CN emission from higher (intermediate) disk layers. We consider whether and how the particular spatial location and excitation conditions of CN emission from the Flying Saucer can be related to CN production that is governed, radially and vertically, by the degree of irradiation of the flared disk by X-rays and UV photons from the central star.
We present high-resolution $^{12}$CO and $^{13}$CO 2-1 ALMA observations, as well as optical and near-infrared spectroscopy, of the highly-inclined protoplanetary disk around SSTC2D J163131.2-242627. The spectral type we derive for the source is cons istent with a $rm 1.2 , M_{odot}$ star inferred from the ALMA observations. Despite its massive circumstellar disk, we find little to no evidence for ongoing accretion on the star. The CO maps reveal a disk that is unusually compact along the vertical direction, consistent with its appearance in scattered light images. The gas disk extends about twice as far away as both the submillimeter continuum and the optical scattered light. CO is detected from two surface layers separated by a midplane region in which CO emission is suppressed, as expected from freeze-out in the cold midplane. We apply a modified version of the Topographically Reconstructed Distribution method presented by Dutrey et al. 2017 to derive the temperature structure of the disk. We find a temperature in the CO-emitting layers and the midplane of $sim$33 K and $sim$20 K at $rm R<200$ au, respectively. Outside of $rm R>200$ au, the disks midplane temperature increases to $sim$30 K, with a nearly vertically isothermal profile. The transition in CO temperature coincides with a dramatic reduction in the sub-micron and sub-millimeter emission from the disk. We interpret this as interstellar UV radiation providing an additional source of heating to the outer part of the disk.
633 - E. I. Vorobyov 2020
Aims: Response of a protoplanetary disk to luminosity bursts of various duration is studied with the purpose to determine the effect of the bursts on the strength and sustainability of gravitational instability in the disk. A special emphasis is paid to the spatial distribution of gas and grown dust (from 1 mm to a few cm) during and after the burst. Methods: Numerical hydrodynamics simulations using the FEOSAD code were employed to study the dynamics of gas and dust in the thin-disk limit. Dust-to-gas friction including back reaction and dust growth were also considered. Bursts of various duration (from 100 to 500 yr) were initiated in accordance with a thermally ignited magnetorotational instability. Luminosity curves for constant- and declining-magnitude bursts were adopted to represent two typical limiting cases for FU-Orionis-type eruptions. Results: The short-term effect of the burst is to reduce the strength of gravitational instability by heating and expanding the disk. The longest bursts with duration comparable to the revolution period of the spiral can completely dissolve the original two-armed spiral pattern in the gas disk by the end of the burst, while the shortest bursts only weaken the spiral pattern. The reaction of grown dust to the burst is somewhat different. The spiral-like initial distribution with deep cavities in the inter-armed regions transforms into a ring-like distribution with deep gaps. This transformation is most expressed for the longest-duration bursts. The long-term effect of the burst depends on the initial disk conditions at the onset of the burst. In some cases, vigorous disk fragmentation sets in several thousand years after the burst, which was absent in the model without the bursts (abridged).
As the earliest stage of planet formation, massive, optically thick, and gas rich protoplanetary disks provide key insights into the physics of star and planet formation. When viewed edge-on, high resolution images offer a unique opportunity to study both the radial and vertical structures of these disks and relate this to vertical settling, radial drift, grain growth, and changes in the midplane temperatures. In this work, we present multi-epoch HST and Keck scattered light images, and an ALMA 1.3 mm continuum map for the remarkably flat edge-on protoplanetary disk SSTC2DJ163131.2-242627, a young solar-type star in $rho$ Ophiuchus. We model the 0.8 $mu$m and 1.3 mm images in separate MCMC runs to investigate the geometry and dust properties of the disk using the MCFOST radiative transfer code. In scattered light, we are sensitive to the smaller dust grains in the surface layers of the disk, while the sub-millimeter dust continuum observations probe larger grains closer to the disk midplane. An MCMC run combining both datasets using a covariance-based log-likelihood estimation was marginally successful, implying insufficient complexity in our disk model. The disk is well characterized by a flared disk model with an exponentially tapered outer edge viewed nearly edge-on, though some degree of dust settling is required to reproduce the vertically thin profile and lack of apparent flaring. A colder than expected disk midplane, evidence for dust settling, and residual radial substructures all point to a more complex radial density profile to be probed with future, higher resolution observations.
This work aims to understand which midplane conditions are probed by the DCO$^+$ emission in the disk around the Herbig Ae star HD 169142. We explore the sensitivity of the DCO$^+$ formation pathways to the gas temperature and the CO abundance. The D CO$^+$ $J$=3-2 transition was observed with ALMA at a spatial resolution of 0.3. The HD 169142 DCO$^+$ radial intensity profile reveals a warm, inner component at radii <30 AU and a broad, ring-like structure from ~50-230 AU with a peak at 100 AU just beyond the millimeter grain edge. We modeled DCO$^+$ emission in HD 169142 with a physical disk structure adapted from the literature, and employed a simple deuterium chemical network to investigate the formation of DCO$^+$ through the cold deuterium fractionation pathway via H$_2$D$^+$. Contributions from the warm deuterium fractionation pathway via CH$_2$D$^+$ are approximated using a constant abundance in the intermediate disk layers. Parameterized models show that alterations to the midplane gas temperature and CO abundance of the literature model are both needed to recover the observed DCO$^+$ radial intensity profile. The best-fit model contains a shadowed, cold midplane in the region z/r < 0.1 with an 8 K decrease in gas temperature and a factor of five CO depletion just beyond the millimeter grain edge, and a 2 K decrease in gas temperature for r > 120 AU. The warm deuterium fractionation pathway is implemented as a constant DCO$^+$ abundance of 2.0$times$10$^{-12}$ between 30-70 K. The DCO$^+$ emission probes a reservoir of cold material in the HD 169142 outer disk that is not revealed by the millimeter continuum, the SED, nor the emission from the 12CO, 13CO, or C18O $J$=2-1 lines.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا