اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAxial magnetic field injection into thick, imploding liners
56
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
MagLIF is a fairly new fusion concept using a puled-power generator as the main driver. This concept uses a Z-pinch configuration where the implosion is driven by the Z-machine using 27 MA of electrical current in 100 ns. Since the implosion time is long compared to the heat diffusion time of a non-magnetized plasma, MagLIF requires an initial axial magnetic of 30T to reduce heat losses to the liner wall. Since the field needs to penetrate the transmission lines of the pulsed-power generator, as well as the liner itself, the rise time must exceed tens of microseconds. Any coil capable of producing such field on that long a pulse-length is inevitably bulky. The space required to house the coil near the liner increase the inductance of the load, which becomes problematic since the voltage at the load cannot exceed what the driver can already provide. Yet, the enormous amount of current that the Z-machine can provide could be used to produce the required 30 T by tilting the current posts surrounding the liner. However, the field penetration is limited by the skin effect of the liner wall. This paper shows that when current densities are large enough, the material generate resistivity gradients which forces the current to diffusive across the liner wall much fast than the skin time. As a result, the 30T coil can be eliminated and replaced by return current posts with minimal helicity.
قيم البحث
اقرأ أيضاً
The creation of an electron space charge in a dipole magnetic trap and the subsequent injection of positrons has been experimentally demonstrated. Positrons (5eV) were magnetically guided from their source and injected into the trapping field generat
ed by a permanent magnet (0.6T at the poles) using a cross field E $times$ B drift, requiring tailored electrostatic and magnetic fields. The electron cloud is created by thermionic emission from a tungsten filament. The maximum space charge potential of the electron cloud reaches -42V, which is consistent with an average electron density of ($4 pm 2$) $times 10^{12}$ $text{m}^{-3}$ and a Debye length of ($2 pm 1$) $text{cm}$. We demonstrate that the presence of this space potential does not hamper efficient positron injection. Understanding the effects of the negative space charge on the injection and confinement of positrons represents an important intermediate step towards the production of a confined electron-positron pair plasma.
The effect of an external transverse magnetic field on ionization injection of electrons in a laser wakefield accelerator (LWFA) is investigated by theoretical analysis and particle-in-cell simulations. On application of a few tens of Tesla magnetic
field, both the electron trapping condition and the wakefield structure changes significantly such that injection occurs over a shorter distance and at an enhanced rate. Furthermore, beam loading is compensated for, as a result of the intrinsic trapezoidal-shaped longitudinal charge density profile of injected electrons. The nonlinear ionization injection and consequent compensation of beam loading lead to a reduction in the energy spread and an enhancement of both the charge and final peak energy of the electron beam from a LWFA immersed in the magnetic field.
Using detailed spectroscopic measurements, highly-resolved in both time and space, a self-generated plasma rotation is demonstrated for the first time in a cylindrical Z-pinch implosion with a pre-embedded axial magnetic field. The plasma parameters
and all three components of the magnetic field are resolved. The plasma is seen to rotate at a velocity comparable to the peak implosion velocity, considerably affecting the force and energy balance throughout the implosion. Moreover, the evolution of the rotation is consistent with magnetic flux surface isorotation, a novel observation in a Z-pinch.
Precise delivery of mass to burning plasmas is a problem of growing interest in magnetic fusion. The answers to how much mass is necessary and sufficient can vary depending on parameters such as the type of atoms involved, the type of applications, p
lasma conditions, mass injector, and injection timing. Motivated by edge localized mode (ELM) control in H-mode plasmas, disruption mitigation and other applications in magnetic fusion, we report progress and new possibilities in mass delivery based on hollow pellets. Here, a hollow pellet refers to a spherical shell mass structure with a hollow core. Based on an empirical model of pellet ablation, coupled with BOUT++ simulations of ELM triggering threshold, hollow pellets are found to be attractive in comparison with solid spheres for ELM control. By using hollow pellets, it is possible to tailor mass delivery to certain regions of edge plasmas while minimizing core contamination and reducing the total amount of mass needed. We also include experimental progress in mass delivery experiments, in-situ diagnostics and hollow pellet fabrication, and emphasize new experimental possibilities for ELM control based on hollow pellets. A related application is the disruption mitigation scheme using powder encapsulated inside hollow shells. Further experiments will also help to resolve known discrepancies between theoretical predictions and experiments in using mass injection for ELM control and lead to better predictive models for ELM stability and triggering.
We present a novel electron injection scheme for plasma wakefield acceleration. The method is based on recently proposed technique of fast electron generation via laser-solid interaction: a femtosecond laser pulse with the energy of tens of mJ hittin
g a dense plasma target at $45^o$ angle expels a well collimated bunch of electrons and accelerates these close to the specular direction up to several MeVs. We study trapping of these fast electrons by a quasi-linear wakefield excited by an external beam driver in a surrounding low density plasma. This configuration can be relevant to the AWAKE experiment at CERN. We vary different injection parameters: the phase and angle of injection, the laser pulse energy. An approximate trapping condition is derived for a linear axisymmetric wake. It is used to optimise the trapped charge and is verified by three-dimensional particle-in-cell simulations. It is shown that a quasi-linear plasma wave with the accelerating field $sim$ 2.5 GV/m can trap electron bunches with $sim$ 100 pC charge, $sim$ 60 $mu$m transverse normalized emittance and accelerate them to energies of several GeV with the spread $lesssim$ 1 % after 10 m.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
