ترغب بنشر مسار تعليمي؟ اضغط هنا

Spectrophotometric properties of dwarf planet Ceres from the VIR spectrometer on board the Dawn mission

111   0   0.0 ( 0 )
 نشر من قبل Mauro Ciarniello
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We study the spectrophotometric properties of dwarf planet Ceres in the VIS-IR spectral range by means of hyper-spectral images acquired by the VIR imaging spectrometer on board the NASA Dawn mission. Disk-resolved observations with a phase angle within the $7^{circ}<alpha<132^{circ}$ interval were used to characterize Ceres phase curve in the 0.465-4.05 $mu$m spectral range. Hapkes model was applied to perform the photometric correction of the dataset, allowing us to produce albedo and color maps of the surface. The $V$-band magnitude phase function of Ceres was fitted with both the classical linear model and H-G formalism. The single-scattering albedo and the asymmetry parameter at 0.55$mu$m are $w=0.14pm0.02$ and $xi=-0.11pm0.08$, respectively (two-lobe Henyey-Greenstein phase function); the modeled geometric albedo is $0.094pm0.007$; the roughness parameter is $bar{theta}=29^{circ}pm6^{circ}$. Albedo maps indicate small variability on a global scale with an average reflectance of $0.034 pm 0.003$. Isolated areas such as the Occator bright spots, Haulani, and Oxo show an albedo much higher than average. We measure a significant spectral phase reddening, and the average spectral slope of Ceres surface after photometric correction is $1.1%kAA^{-1}$ and $0.85%kAA^{-1}$ at VIS and IR wavelengths, respectively. Broadband color indices are $V-R=0.38pm0.01$ and $R-I=0.33pm0.02$. H-G modeling of the $V$-band magnitude phase curve for $alpha<30^{circ}$ gives $H=3.14pm0.04$ and $G=0.10pm0.04$, while the classical linear model provides $V(1,1,0^{circ})=3.48pm0.03$ and $beta=0.036pm0.002$. The comparison with spectrophotometric properties of other minor bodies indicates that Ceres has a less back-scattering phase function and a slightly higher albedo than comets and C-type objects. However, the latter represents the closest match in the usual asteroid taxonomy.

قيم البحث

اقرأ أيضاً

We present a global spectrophotometric characterization of the Ceres surface using Dawn Framing Camera (FC) images. We identify the photometric model that yields the best results for photometrically correcting images. Corrected FC images acquired on approach to Ceres were assembled into global maps of albedo and color. Generally, albedo and color variations on Ceres are muted. The albedo map is dominated by a large, circular feature in Vendimia Planitia, known from HST images (Li et al., 2006), and dotted by smaller bright features mostly associated with fresh-looking craters. The dominant color variation over the surface is represented by the presence of blue material in and around such craters, which has a negative spectral slope over the visible wavelength range when compared to average terrain. We also mapped variations of the phase curve by employing an exponential photometric model, a technique previously applied to asteroid Vesta (Schroder et al., 2013b). The surface of Ceres scatters light differently from Vesta in the sense that the ejecta of several fresh-looking craters may be physically smooth rather than rough. High albedo, blue color, and physical smoothness all appear to be indicators of youth. The blue color may result from the desiccation of ejected material that is similar to the phyllosilicates/water ice mixtures in the experiments of Poch et al. (2016). The physical smoothness of some blue terrains would be consistent with an initially liquid condition, perhaps as a consequence of impact melting of subsurface water ice. We find red terrain (positive spectral slope) near Ernutet crater, where De Sanctis et al. (2017) detected organic material. The spectrophotometric properties of the large Vendimia Planitia feature suggest it is a palimpsest, consistent with the Marchi et al. (2016) impact basin hypothesis. The central bright area in Occator crater, Cerealia...
This work describes the correction method applied to the dataset acquired at the asteroid (4) Vesta by the visible channel of the visible and infrared mapping spectrometer. The rising detector temperature during data acquisitions in the visible wavel engths leads to a spectral slope increase over the whole spectral range. This limits the accuracy of the studies of the Vesta surface in this wavelength range. Here, we detail an empirical method to correct for the visible detector temperature dependency while taking into account the specificity of the Vesta dataset.
174 - B. Rousseau 2020
We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres.
We mapped all boulders larger than 105 m on the surface of dwarf planet Ceres using images of the Dawn framing camera acquired in the Low Altitude Mapping Orbit (LAMO). We find that boulders on Ceres are more numerous towards high latitudes and have a maximum lifetime of $150 pm 50$ Ma, based on crater counts. These characteristics are distinctly different from those of boulders on asteroid (4) Vesta, an earlier target of Dawn, which implies that Ceres boulders are mechanically weaker. Clues to their properties can be found in the composition of Ceres complex crust, which is rich in phyllosilicates and salts. As water ice is though to be present only meters below the surface, we suggest that boulders also harbor ice. Furthermore, the boulder size-frequency distribution is best fit by a Weibull distribution rather than the customary power law, just like for Vesta boulders. This finding is robust in light of possible types of size measurement error.
94 - B. Rousseau 2019
Data acquired at Ceres by the visible channel of the Visible and InfraRed mapping spectrometer (VIR) on board the NASA Dawn spacecraft are affected by the temperatures of both the visible (VIS) and the infrared (IR) sensors, which are respectively a CCD and a HgCdTe array. The variations of the visible channel temperatures measured during the sessions of acquisitions are correlated with variations in the spectral slope and shape for all the mission phases. The infrared channel (IR) temperature is more stable during the acquisitions, nonetheless it is characterized by a bi-modal distribution whether the cryocooler (and therefore the IR channel) is used or not during the visible channel operations. When the infrared channel temperature is high (175K, i.e. not in use and with crycooler off), an additional negative slope and a distortion are observed in the spectra of the visible channel. We developed an empirical correction based on a reference spectrum for the whole data set; it is designed to correct the two issues related to the sensor temperatures that we have identified. The reference spectrum is calculated to be representative of the global Ceres surface. It is also made of data acquired when the visible and infrared channel temperatures are equal to the ones measured during an observation of the Arcturus star by VIR, which is consistent with several ground-based observations. The developed correction allows reliable analysis and mapping to be performed by minimizing the artifacts induced by fluctuations of the VIS temperature. Thanks to this correction, a direct comparison between different mission phases during which VIR experienced different visible and infrared channel temperatures is now possible.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا