اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدLocal electroexfoliation of graphene with a STM tip
109
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Graphite surfaces can be manipulated by several methods to create graphene structures of different shapes and sizes. Scanning tunneling microscopy (STM) can be used to create these structures either through mechanical contact between the tip and the surface or through electro-exfoliation. In the latter, the mechanisms involved in the process of exfoliation with an applied voltage are not fully understood. Here we show how a graphite surface can be locally exfoliated in a systematic manner by applying an electrostatic force with a STM tip at the edge of a terrace, forming triangular flakes several nanometers in length. We demonstrate, through experiments and simulations, how these flakes are created by a two-step process: first a voltage ramp must be applied at the edge of the terrace, and then the tip must be scanned perpendicularly to the edge. Ab-initio electrostatic calculations reveal that the presence of charges on the graphite surface weakens the interaction between layers allowing for exfoliation at voltages in the same range as those used experimentally. Molecular dynamics simulations show that a force applied locally on the edge of a step produces triangular flakes such as those observed under STM. Our results provide new insights towards surface modification that can be extended to other layered materials.
قيم البحث
اقرأ أيضاً
We have developed a novel method for crystalline hydrogenation of graphene on the nanoscale. Molecular hydrogen was physisorbed at 5 K onto pristine graphene islands grown on Cu(111) in ultrahigh vacuum. Field emission local to the tip of a scanning
tunneling microscope dissociates H$_2$ and results in hydrogenated graphene. At lower coverage, isolated point defects are found on the graphene and are attributed to chemisorbed H on top and bottom surfaces. Repeated H$_2$ exposure and field emission yielded patches and then complete coverage of a crystalline $sqrt{3}$ $times$ $sqrt{3}$ R30{deg} phase, as well as less densely packed 3 $times$ 3 and 4 $times$ 4 structures. The hydrogenation can be reversed by imaging with higher bias voltage.
Herein we discuss the fabrication of ballistic suspended graphene nanostructures supplemented with local gating. Using in-situ current annealing, we show that exceptional high mobilities can be obtained in these devices. A detailed description is giv
en of the fabrication of bottom and different top-gate structures, which enable the realization of complex graphene structures. We have studied the basic building block, the p-n junction in detail, where a striking oscillating pattern was observed, which can be traced back to Fabry-Perot oscillations that are localized in the electronic cavities formed by the local gates. Finally we show some examples how the method can be extended to incorporate multi-terminal junctions or shaped graphene. The structures discussed here enable the access to electron-optics experiments in ballistic graphene.
We consider the theory of Kondo effect and Fano factor energy dependence for magnetic impurity (Co) on graphene. We have performed a first principles calculation and find that the two dimensional $E_1$ representation made of $d_{xz},d_{yz}$ orbitals
is likely to be responsible for the hybridization and ultimately Kondo screening for cobalt on graphene. There are few high symmetry sites where magnetic impurity atom can be adsorbed. For the case of Co atom in the middle of hexagon of carbon lattice we find anomalously large Fano $q$-factor, $qapprox 80$ and strongly suppressed coupling to conduction band. This anomaly is a striking example of quantum mechanical interference related to the Berry phase inherent to graphene band structure.
Monolayer graphene epitaxially grown on SiC(0001) was etched by H-plasma and studied by scanning tunneling microscopy and spectroscopy. The etching created partly hexagonal nanopits of monatomic depth as well as elevated regions with a height of abou
t 0.12 nm which are stable at $T$ = 78 K. The symmetric tunnel spectrum about the Femi energy and the absence of a $6times6$ corrugation on the elevated regions suggest that in these regions the carbon buffer layer is decoupled from the SiC substrate and quasi-free-standing bilayer graphene appears at originally monolayer graphene on the buffer layer. This is a result of passivation of the SiC substrate by intercalated hydrogen as in previous reports for graphene on SiC(0001) heat treated in atomic hydrogen.
We investigate numerically the possibility to detect the spatial profile of Majorana fermions (MFs) modeling STM tips that are made of either normal or superconducting material. In both cases, we are able to resolve the localization length and the os
cillation period of the MF wavefunction. We show that the tunneling between the substrate and the tip, necessary to get the information on the wave function oscillations, has to be smaller in the case of a superconducting STM. In the strong tunneling regime, the differential conductance saturates making it more difficult to observe the exponential decay of MFs. The temperature broadening of the profile is strongly suppressed in case of the superconducting lead resulting, generally, in better resolution.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
