اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSolidification and loss of hydrostaticity in liquid media used for pressure measurements
161
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are: 1:1 isopentane/n-pentane, 4:6 light mineral oil/n-pentane, 1:1 isoamyl alcohol/n-pentane, 4:1 methanol/ethanol, 1:1 FC72/FC84 (Fluorinert), Daphne 7373, isopentane, and Dow Corning PMX silicone oils 200 and 60,000 cst. We relied on the sensitivity of the electrical resistivity of Ba(Fe1-xRux)2As2 single crystals to the freezing of the pressure media, and cross-checked with corresponding anomalies observed in the resistance of the manganin coil that served as the ambient temperature resistive manometer. In addition to establishing the Temperature-Pressure line separating the liquid (hydrostatic) and frozen (non-hydrostatic) phases, these data permit rough estimates of the freezing pressure of these media at ambient temperature. This pressure establishes the extreme limit for the medium to be considered hydrostatic. For higher applied pressures the medium has to be treated as non-hydrostatic.
قيم البحث
اقرأ أيضاً
Molecular dynamics simulation study based on the EAM potential is carried out to investigate the effect of pressure on the rapid solidification of Aluminum. The radial distribution function is used to characterize the structure of the Al solidified u
nder different pressures. It is indicated that a high pressure leads to strong crystallization tendency during cooling.
We simulate solidification in a narrow channel through the use of a phase-field model with an adaptive grid. In different regimes, we find that the solid can grow in fingerlike steady-state shapes, or become unstable, exhibiting unsteady growth. At l
ow melt undercoolings, we find good agreement between our results, theoretical predictions, and experiment. For high undercoolings, we report evidence for a new stable steady-state finger shape which exists in experimentally accessible ranges for typical materials.
We have developed a new type of opposed-anvil high pressure cell with substantially improved space efficiency. The clamp cell and the gasket are made of non-magnetic Ni-Cr-Al alloy. Non-magnetic tungsten carbide (NMWC) is used for the anvils. The ass
embled cell with the dimension phi 29mm times 41mm is capable of generating pressure up to 9 GPa over a relatively large volume of 7 mm3. Our cell is particularly suitable for those experiments which require large sample space to achieve good signal-to-noise ratio, such as the nuclear magnetic resonance (NMR) experiment. Argon is used as the pressure transmitting medium to obtain good hydrostaticity. The pressure was calibrated in situ by measuring the fluorescence from ruby through a transparent moissanite (6H-SiC) window. We have measured the pressure and temperature dependences of the 63Cu nuclear-quadrupole-resonance (NQR) frequency of Cu2O, the in-plane Knight shift of metallic tin, and the Knight shift of platinum. These quantities can be used as reliable manometers to determine the pressure values in situ during the NMR/NQR experiments up to 9 GPa.
We present full characterisation of acoustic wave devices based on the fully synthetic crystalline material at the liquid helium temperature range { required for the design of ultra low loss mechanical systems in many areas of research including freq
uency control and fundamental measurements}. Temperature coefficients of the effective elastic tensor of Langatate (LGT) in Lagrangian representation are determined for the temperature range $3.8-15$K. The Lagrangian formalism is mandatory in the analysed situation since the expansion coefficients of the LGT are still unknown at these temperatures. The measurement method involves a set of high-quality resonators of various cut angles, and uses measurements of frequency-temperature relations to extract the temperature coefficients of the elastic tensor. In addition, power sensitivity of LGT resonators at cryogenic temperatures is determined and dominant loss mechanism is identified.
Magnetometry and neutron scattering have been used to study the magnetic properties of pressure graded Co/Pd multilayers. The grading of the multilayer structure was done by varying the deposition pressure during sputtering of the samples. Magnetic d
epth profiling by polarized neutron reflectometry directly shows that for pressure-graded samples, the magnetization changes significantly from one pressure region to the next, while control samples sputtered at uniform pressure exhibit essentially uniform magnetic depth profiles. Complementary magnetometry results suggest that the observed graded magnetic profiles are due in part to a decrease in saturation magnetization for regions deposited at progressively higher pressure. Increased deposition pressure is shown to increase coercivity, and for graded samples, the absence of discrete steps in the hysteresis loops implies exchange coupling among regions deposited at different pressures.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
