اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCooling-rate dependence of kinetic and mechanical stability of simulated glasses
123
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Recently, ultrastable glasses have been created through vapor deposition. Subsequently, computer simulation algorithms have been proposed that mimic the vapor deposition process and result in simulated glasses with increased stability. In addition, random pinning has been used to generate very stable glassy configurations without the need for lengthy annealing or special algorithms inspired by vapor deposition. Kinetic and mechanical stability of experimental ultrastable glasses is compared to those of experimental glasses formed by cooling. We provide the basis for a similar comparison for simulated stable glasses: we analyze the kinetic and mechanical stability of simulated glasses formed by cooling at a constant rate by examining the transformation time to a liquid upon rapid re-heating, the inherent structure energies, and the shear modulus. The kinetic and structural stability increases slowly with decreasing cooling rate. The methods outlined here can be used to assess kinetic and mechanical stability of simulated glasses generated by using specialized algorithms.
قيم البحث
اقرأ أيضاً
We use computer simulations to study the cooling rate dependence of the stability and energetics of model glasses created at constant pressure conditions and compare the results with glasses formed at constant volume conditions. To examine the stabil
ity, we determine the time it takes for a glass cooled and reheated at constant pressure to transform back into a liquid, $t_{mathrm{trans}}$, and calculate the stability ratio $S = t_{mathrm{trans}}/tau_alpha$, where $tau_alpha$ is the equilibrium relaxation time of the liquid. We find that, for slow enough cooling rates, cooling and reheating at constant pressure results in a larger stability ratio $S$ than for cooling and reheating at constant volume. We also compare the energetics of glasses obtained by cooling while maintaining constant pressure with those of glasses created by cooling from the same state point while maintaining constant volume. We find that cooling at constant pressure results in glasses with lower average potential energy and average inherent structure energy. We note that in model simulations of the vapor deposition process glasses are created under constant pressure conditions, and thus they should be compared to glasses obtained by constant pressure cooling.
Unlike crystals, glasses age or devitrify over time to lower their free energy, reflecting their intrinsically non-equilibrium nature. This lack of stability is a serious issue in many industrial applications. Here, we show by numerical simulations t
hat devitrification and ageing of quasi hard-sphere glasses are prevented by suppressing volume-fraction inhomogeneities in the spatial arrangement of the particles. A glass of monodisperse quasi hard-sphere particles, known to devitrify and age with `avalanche-like intermittent dynamics, is subjected to small iterative adjustments to particle sizes to make the local volume fractions spatially uniform. We find that this almost entirely prevents structural relaxation and devitrification even in the presence of crystallites. The homogenisation of local volume fractions leads to a dramatic change in the local mechanical environment of each particle, with a clear homogenisation in the number of load-bearing nearest neighbours each particle has. This indicates that we may stabilise glasses by making them more `mechanically homogeneous. Our finding provides a physical principle for glass stabilisation and opens a novel route to the formation of mechanically stabilised glasses.
Vesicles prepared in water from a series of diblock copolymers and termed polymersomes are physically characterized. With increasing molecular weight $bar{M}_n$, the hydrophobic core thickness $d$ for the self-assembled bilayers of polyethyleneoxide
- polybutadiene (PEO-PBD) increases up to 20 $nm$ - considerably greater than any previously studied lipid system. The mechanical responses of these membranes, specifically, the area elastic modulus $K_a$ and maximal areal strain $alpha_c$ are measured by micromanipulation. As expected for interface-dominated elasticity, $K_a$ ($simeq$ 100 $pN/nm$) is found to be independent of $bar{M}_n$. Related mean-field ideas also predict a limiting value for $alpha_c$ which is universal and about 10-fold above that typical of lipids. Experiments indeed show $alpha_c$ generally increases with $bar{M}_n$, coming close to the theoretical limit before stress relaxation is opposed by what might be chain entanglements at the highest $bar{M}_n$. The results highlight the interfacial limits of self-assemblies at the nano-scale.
The role of porous structure and glass density in response to compressive deformation of amorphous materials is investigated via molecular dynamics simulations. The disordered, porous structures were prepared by quenching a high-temperature binary mi
xture below the glass transition into the phase coexistence region. With decreasing average glass density, the pore morphology in quiescent samples varies from a random distribution of compact voids to a porous network embedded in a continuous glass phase. We find that during compressive loading at constant volume, the porous structure is linearly transformed in the elastic regime and the elastic modulus follows a power-law increase as a function of the average glass density. Upon further compression, pores deform significantly and coalesce into large voids leading to formation of domains with nearly homogeneous glass phase, which provides an enhanced resistance to deformation at high strain.
A wide range of materials can exist in microscopically disordered solid forms, referred to as amorphous solids or glasses. Such materials -- oxide glasses and metallic glasses, to polymer glasses, and soft solids such as colloidal glasses, emulsions
and granular packings -- are useful as structural materials in a variety of contexts. Their deformation and flow behaviour is relevant for many others. Apart from fundamental questions associated with the formation of these solids, comprehending their mechanical behaviour is thus of interest, and of significance for their use as materials. In particular, the nature of plasticity and yielding behaviour in amorphous solids has been actively investigated. Different amorphous solids exhibit behaviour that is apparently diverse and qualitatively different from those of crystalline materials. A goal of recent investigations has been to comprehend the unifying characteristics of amorphous plasticity and to understand the apparent differences among them. We summarise some of the recent progress in this direction. We focus on insights obtained from computer simulation studies, and in particular those employing oscillatory shear deformation of model glasses.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
