ترغب بنشر مسار تعليمي؟ اضغط هنا

Optical characterization of RTV615 silicone rubber compound

456   0   0.0 ( 0 )
 نشر من قبل Garth Huber
 تاريخ النشر 2014
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Room Temperature Vulcanized (RTV) silicone compounds are commonly used to bond optical components. For our application, we needed to identify an adhesive with good ultraviolet transmission characteristics, to couple photomultipliers to quartz windows in a Heavy Gas Cerenkov detector that is being constructed for Experimental Hall C of Jefferson Lab to provide pi/K separation up to 11 GeV/c. To this end, we present the light transmission results for Momentive RTV615 silicone rubber compound for wavelengths between 195-400 nm, obtained with an adapted reflectivity apparatus at Jefferson Lab. All samples cured at room temperature have transmissions ~93% for wavelengths between 360-400 nm and fall sharply below 230 nm. Wavelength dependent absorption coefficients were extracted with four samples of different thicknesses cured at normal temperature (25oC for 7 days). The absorption coefficient drops approximately two orders in magnitude from 220-400 nm, exhibiting distinct regions of flattening near 250 nm and 330 nm. We also investigated the effect of a high temperature curing method (100oC for 1 hour) and found 5-10% better transmission than with the normal method. The effect was more significant with larger sample thickness (3.35 mm) over the wavelength range of 220-280 nm.



قيم البحث

اقرأ أيضاً

224 - A. Uddin , D. Estevez , H.X. Peng 2020
Previously, we have shown the advantages of an approach based on microstructural modulation of the functional phase and topology of periodically arranged elements to program wave scattering in ferromagnetic microwire composites. However, the possibil ity of making full use of composite intrinsic structure was not exploited. In this work, we implement the concept of material plainification by an in-built vertical interface on randomly dispersed short-cut microwire composites allowing the adjustment of electromagnetic properties to a large extent. Such interface was modified through arranging wires of different structures in two separated regions and by enlarging or reducing these regions through wire concentration variations leading to polarization differences across the interface and hence microwave tunability. When the wire concentration was equal in both regions, two well-defined transmission windows with varied amplitude and bandwidth were generated. Wire concentration fluctuations resulted in strong scattering changes ranging from broad passbands to stopbands with pronounced transmission dips, demonstrating the intimate relationship between wire content and space charge variations at the interface. Overall, this study provides a novel method to rationally exploit interfacial effects in microwire composites. Moreover, the advantages of enabling significantly tunable scattering spectra by merely 0.053 vol. % filler loading and relatively simple structure make the proposed composite plainification strategy instrumental to designing microwave filters with broadband frequency selectivity.
66 - S. Afach , D. Budker , G. DeCamp 2018
The Global Network of Optical Magnetometers to search for Exotic physics (GNOME) is a network of geographically separated, time-synchronized, optically pumped atomic magnetometers that is being used to search for correlated transient signals heraldin g exotic physics. The GNOME is sensitive to nuclear- and electron-spin couplings to exotic fields from astrophysical sources such as compact dark-matter objects (for example, axion stars and domain walls). Properties of the GNOME sensors such as sensitivity, bandwidth, and noise characteristics are studied in the present work, and features of the networks operation (e.g., data acquisition, format, storage, and diagnostics) are described. Characterization of the GNOME is a key prerequisite to searches for and identification of exotic physics signatures.
In this work we report on the Monte Carlo study performed to understand and reproduce experimental measurements of a new plastic b{eta}-detector with cylindrical geometry. Since energy deposition simulations differ from the experimental measurements for such a geometry, we show how the simulation of production and transport of optical photons does allow one to obtain the shapes of the experimental spectra. Moreover, taking into account the computational effort associated with this kind of simulation, we develop a method to convert the simulations of energy deposited into light collected, depending only on the interaction point in the detector. This method represents a useful solution when extensive simulations have to be done, as in the case of the calculation of the response function of the spectrometer in a total absorption {gamma}-ray spectroscopy analysis.
We propose a novel cantilever device integrated with a polydimethylsiloxane (PDMS)-encapsulated crack sensor that directly measures the cardiac contractility. The crack sensor was chemically bonded to a PDMS thin layer to form a sandwiched structure which allows to be operated very stably in culture media. The reliability of the proposed crack sensor has improved dramatically compared to no encapsulation layer. After evaluating the durability of the crack sensor bonded with the PDMS layer, cardiomyocytes were cultured on the nano-patterned cantilever for real-time measurement of cardiac contractile forces. The highly sensitive crack sensor continuously measured the cardiac contractility without changing its gauge factor for up to 26 days (>5 million heartbeats). In addition, changes in contractile force induced by drugs were monitored using the crack sensor-integrated cantilever. Finally, experimental results were compared with those obtained via conventional electrophysiological methods to verify the feasibility of building a contraction-based drug-toxicity testing system.
We showcase an optical random sampling scope that exploits single photon counting and apply it to characterize optical transceivers. We study single photon detectors with a jitter down to 40 ps. The method can be extended beyond 100 GHz.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا