اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCreation of a homogeneous plasma column by means of hohlraum radiation for ion-stopping measurements
395
0
0.0
(
0
)
تأليف
Steffen Faik
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this work, we present the results of two-dimensional radiation-hydrodynamics simulations of a hohlraum target whose outgoing radiation is used to produce a homogeneously ionized carbon plasma for ion-beam stopping measurements. The cylindrical hohlraum with gold walls is heated by a frequency-doubled ($lambda_l = 526.5$ $mu m$) $1.4$ $ns$ long laser pulse with the total energy of $E_l = 180$ $J$. At the laser spot, the peak matter and radiation temperatures of, respectively, $T approx 380$ $eV$ and $T_r approx 120$ $eV$ are observed. X-rays from the hohlraum heat the attached carbon foam with a mean density of $rho_C = 2$ $mg/cm^3$ to a temperature of $T approx 25$ $eV$. The simulation shows that the carbon ionization degree ($Z approx 3.75$) and its column density stay relatively stable (within variations of about $pm7%$) long enough to conduct the ion-stopping measurements. Also, it is found that a special attention should be paid to the shock wave, emerging from the X-ray heated copper support plate, which at later times may significantly distort the carbon column density traversed by the fast ions.
قيم البحث
اقرأ أيضاً
Hot dense capsule implosions driven by z-pinch x-rays have been measured for the first time. A ~220 eV dynamic hohlraum imploded 1.7-2.1 mm diameter gas-filled CH capsules which absorbed up to ~20 kJ of x-rays. Argon tracer atom spectra were used to
measure the Te~ 1keV electron temperature and the ne ~ 1-4 x10^23 cm-3 electron density. Spectra from multiple directions provide core symmetry estimates. Computer simulations agree well with the peak compression values of Te, ne, and symmetry, indicating reasonable understanding of the hohlraum and implosion physics.
The dynamics of nuclear reaction in plasma is a fundamental issue in many high energy density researches, such as the astrophysical reactions and the inertial confinement fusion. The effective reaction cross-sections and ion stopping power in plasma
need to be taken into account to analyze the reactivity. In this research, we have experimentally investigated the from D-D reactions from interactions between deuteron beams and deuterated polystyrene (CD) plasma, driven by two laser pulses respectively. The neutron yields, plasma density and deuteron energy loss in plasma have been measured, and the plasma temperature and deuteron stopping power have been analyzed from simulations. It is shown that, compared with a cold target, the reaction probability in plasma conditions can be enhanced or suppressed, which is ascribed to the deuteron stopping power modifications in plasma. In hotter CD plasma, the energy loss of moderate energetic deuterons reduces, which leads to higher D-D reaction probability, while the contrary happens in colder plasma. This work provides new understanding of fusion reactions in plasma environment.
Advanced linear accelerator design may use Optical Transition Radiation (OTR) screens to measure beam spot size; for instance, such screens are foreseen in plasma based accelerators (EuPRAXIA@SPARC_LAB) or Compton machines (Gamma Beam Source@ELI-NP).
Optical Transition Radiation angular distribution strongly depends on beam energy. Since OTR screens are typically placed in several positions along the Linac to monitor the beam envelope, one may perform a distributed energy measurement along the machine. Furthermore, a single shot energy measurement can be useful in plasma accelerators to measure shot to shot energy variations after the plasma interaction. Preliminary measurements of OTR angular distribution of about 100 MeV electrons have been performed at the SPARC_LAB facility. In this paper, we discuss the sensitivity of this measurement to beam divergence and others parameters, as well as the resolution required and the needed upgrades of conventional OTR diagnostics, using as an example the data collected at SPARC_LAB.
A dynamic mitigation is presented for sausage and kink instability growths of a z-current driven magnetized plasma column. We have proposed a dynamic mitigation method based on a phase control to smooth plasma non-uniformities and to mitigate the ins
tability growth in perturbed plasma systems. In this paper we found that a wobbling motion of the z-current electron axis induces a phase-controlled perturbation, so that the growths of the sausage and kink instabilities are successfully mitigated. In general, plasma instabilities emerge from perturbations, and the perturbation phase is normally unknown. However, if the perturbation phase is known or actively imposed by, for example, a designed driver wobbling behavior, the instability growth would be controlled and mitigated by a superimposition of the perturbations imposed. The results in this paper demonstrate that the wobbling z-current electron beam would provide an improvement in the plasma column stability and uniformity.
The derivation of Debye shielding and Landau damping from the $N$-body description of plasmas requires many pages of heavy kinetic calculations in classical textbooks and is done in distinct, unrelated chapters. Using Newtons second law for the $N$-b
ody system, we perform this derivation in a few steps with elementary calculations using standard tools of calculus, and no probabilistic setting. Unexpectedly, Debye shielding is encountered on the way to Landau damping. The theory is extended to accommodate a correct description of trapping or chaos due to Langmuir waves, and to avoid the small amplitude assumption for the electrostatic potential. Using the shielded potential, collisional transport is computed for the first time by a convergent expression including the correct calculation of deflections for all impact parameters. Shielding and collisional transport are found to be two related aspects of the repulsive deflections of electrons.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
