ترغب بنشر مسار تعليمي؟ اضغط هنا

Calculating energy storage due to topological changes in emerging active region NOAA AR 11112

105   0   0.0 ( 0 )
 نشر من قبل Lucas Tarr
 تاريخ النشر 2012
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The Minimum Current Corona (MCC) model provides a way to estimate stored coronal energy using the number of field lines connecting regions of positive and negative photospheric flux. This information is quantified by the net flux connecting pairs of opposing regions in a connectivity matrix. Changes in the coronal magnetic field, due to processes such as magnetic reconnection, manifest themselves as changes in the connectivity matrix. However, the connectivity matrix will also change when flux sources emerge or submerge through the photosphere, as often happens in active regions. We have developed an algorithm to estimate the changes in flux due to emergence and submergence of magnetic flux sources. These estimated changes must be accounted for in order to quantify storage and release of magnetic energy in the corona. To perform this calculation over extended periods of time, we must additionally have a consistently labeled connectivity matrix over the entire observational time span. We have therefore developed an automated tracking algorithm to generate a consistent connectivity matrix as the photospheric source regions evolve over time. We have applied this method to NOAA Active Region 11112, which underwent a GOES M2.9 class flare around 19:00 on Oct.16th, 2010, and calculated a lower bound on the free magnetic energy buildup of ~8.25 x 10^30 ergs over 3 days.



قيم البحث

اقرأ أيضاً

The NOAA active region AR 11029 was a small but highly active sunspot region which produced 73 GOES soft X-ray flares. The flares appear to show a departure from the well known power-law frequency-size distribution. Specifically, too few GOES C-class and no M-class flares were observed by comparison with a power-law distribution (Wheatland in Astrophys. J. 710, 1324, 2010). This was conjectured to be due to the region having insufficient magnetic energy to power large events. We construct nonlinear force-free extrapolations of the coronal magnetic field of active region AR 11029 using data taken on 24 October by the SOLIS Vector-SpectroMagnetograph (SOLIS/VSM), and data taken on 27 October by the Hinode Solar Optical Telescope SpectroPolarimeter (Hinode/SP). Force-free modeling with photospheric magnetogram data encounters problems because the magnetogram data are inconsistent with a force-free model, and we employ a recently developed `self-consistency procedure which addresses this and accommodates uncertainties in the boundary data (Wheatland and Regnier in Astrophys. J. 700, L88, 2009). We calculate the total energy and free energy of the self-consistent solution and find that the free energy was 4x10^29 erg on 24 October, and 7x10^31 erg on 27 October. An order of magnitude scaling between RHESSI non-thermal energy and GOES peak X-ray flux is established from a sample of flares from the literature and is used to estimate flare energies from observed GOES peak X-ray flux. Based on the scaling, we conclude that the estimated free energy of AR 11029 on 27 October when the flaring rate peaked is sufficient to power M-class or X-class flares, and hence the modeling does not appear to support the hypothesis that the absence of large flares is due to the region having limited energy.
149 - S. Toriumi , Y. Iida , K. Kusano 2014
We present a comparison of the Solar Dynamics Observatory (SDO) analysis of NOAA Active Region (AR) 11158 and numerical simulations of flux-tube emergence, aiming to investigate the formation process of this flare-productive AR. First, we use SDO/Hel ioseismic and Magnetic Imager (HMI) magnetograms to investigate the photospheric evolution and Atmospheric Imaging Assembly (AIA) data to analyze the relevant coronal structures. Key features of this quadrupolar region are a long sheared polarity inversion line (PIL) in the central delta-sunspots and a coronal arcade above the PIL. We find that these features are responsible for the production of intense flares, including an X2.2-class event. Based on the observations, we then propose two possible models for the creation of AR 11158 and conduct flux-emergence simulations of the two cases to reproduce this AR. Case 1 is the emergence of a single flux tube, which is split into two in the convection zone and emerges at two locations, while Case 2 is the emergence of two isolated but neighboring tubes. We find that, in Case 1, a sheared PIL and a coronal arcade are created in the middle of the region, which agrees with the AR 11158 observation. However, Case 2 never builds a clear PIL, which deviates from the observation. Therefore, we conclude that the flare-productive AR 11158 is, between the two cases, more likely to be created from a single split emerging flux than from two independent flux bundles.
In this work we study how the input data cadence affects the photospheric energy and helicity injection estimates in eruptive NOAA active region 11158. We sample the novel 2.25-minute vector magnetogram and Dopplergram data from the emph{Helioseismic and Magnetic Imager} (HMI) instrument onboard the emph{Solar Dynamics Observatory} (SDO) spacecraft to create input datasets of variable cadences ranging from 2.25 minutes to 24 hours. We employ state-of-the-art data processing, velocity and electric field inversion methods for deriving estimates of the energy and helicity injections from these datasets. We find that the electric field inversion methods that reproduce the observed magnetic field evolution through the use of Faradays law are more stable against variable cadence: the PDFI (PTD-Doppler-FLCT-Ideal) electric field inversion method produces consistent injection estimates for cadences from 2.25 minutes up to 2 hours, implying that the photospheric processes acting on time scales below 2 hours contribute little to the injections, or that they are below the sensitivity of the input data and the PDFI method. On other hand, the electric field estimate derived from the output of DAVE4VM (Differential Affine Velocity Estimator for Vector Magnetograms), which does not fulfil Faradays law exactly, produces significant variations in the energy and helicity injection estimates in the 2.25-minute to 2-hour cadence range. We present also a third, novel DAVE4VM-based electric field estimate, which corrects the poor inductivity of the raw DAVE4VM estimate. This method is less sensitive to the changes of cadence, but still faces significant issues for the lowest of considered cadences ($geq$2 hours). We find several potential problems in both PDFI- and DAVE4VM-based injection estimates and conclude that the quality of both should be surveyed further in controlled environments.
The physical conditions leading the sunspot penumbra decay are poorly understood so far. We investigate the photospheric magnetic and velocity properties of a sunspot penumbra during the decay phase to advance the current knowledge of the conditions leading to this process. A penumbral decay was observed with the CRISP instrument at the Swedish 1m Solar Telescope on 2016 September 4 and 5 in active region NOAA 12585. During these days, full-Stokes spectropolarimetric scans along the Fe I 630 nm line pair were acquired over more than one hour. We inverted these observations with the VFISV code in order to obtain the evolution of the magnetic and velocity properties. We complement the study with data from instruments onboard the Solar Dynamics Observatory and Hinode space missions. The studied penumbra disappears progressively in both time and space. The magnetic flux evolution seems to be linked to the presence of Moving Magnetic Features (MMFs). Decreasing Stokes V signals are observed. Evershed flows and horizontal fields were detected even after the disappearance of the penumbral sector. The analyzed penumbral decay seems to result from the interaction between opposite polarity fields in type III MMFs and penumbra, while the presence of overlying canopies rules the evolution in the different penumbral sectors.
How much electromagnetic energy crosses the photosphere in evolving solar active regions? With the advent of high-cadence vector magnetic field observations, addressing this fundamental question has become tractable. In this paper, we apply the PTD-D oppler-FLCT-Ideal (PDFI) electric field inversion technique of Kazachenko et al. (2014) to a 6-day HMI/SDO vector magnetogram and Doppler velocity sequence, to find the electric field and Poynting flux evolution in active region NOAA 11158, which produced an X2.2 flare early on 2011 February 15. We find photospheric electric fields ranging up to $2$ V/cm. The Poynting fluxes range from $[-0.6$ to $2.3]times10^{10}$ ergs$cdot$cm$^{-2}$s$^{-1}$, mostly positive, with the largest contribution to the energy budget in the range of $[10^9$-$10^{10}]$ ergs$cdot$cm$^{-2}$s$^{-1}$. Integrating the instantaneous energy flux over space and time, we find that the total magnetic energy accumulated above the photosphere from the initial emergence to the moment before the X2.2 flare to be $E=10.6times10^{32}$ ergs, which is partitioned as $2.0$ and $8.6times10^{32}$ ergs, respectively, between free and potential energies. Those estimates are consistent with estimates from preflare non-linear force-free field (NLFFF) extrapolations and the Minimum Current Corona estimates (MCC), in spite of our very different approach. This study of photospheric electric fields demonstrates the potential of the PDFI approach for estimating Poynting fluxes and opens the door to more quantitative studies of the solar photosphere and more realistic data-driven simulations of coronal magnetic field evolution.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا