ترغب بنشر مسار تعليمي؟ اضغط هنا

Paper Productivity of Ground-based Large Optical Telescopes from 2000 to 2009

111   0   0.0 ( 0 )
 نشر من قبل Sang Chul Kim
 تاريخ النشر 2011
  مجال البحث فيزياء
والبحث باللغة English
 تأليف Sang Chul KIM




اسأل ChatGPT حول البحث

We present an analysis of the scientific (refereed) paper productivity of the current largest (diameter >8 m) ground-based optical(-infrared) telescopes during the ten year period from 2000 to 2009. The telescopes for which we have gathered and analysed the scientific publication data are the two 10 m Keck telescopes, the four 8.2 m Very Large Telescopes (VLT), the two 8.1 m Gemini telescopes, the 8.2 m Subaru telescope, and the 9.2 m Hobby-Eberly Telescope (HET). We have analysed the rate of papers published in various astronomical journals produced by using these telescopes. While the total numbers of papers from these observatories are largest for the VLT followed by Keck, Gemini, Subaru, and HET, the number of papers produced by each component of the telescopes are largest for Keck followed by VLT, Subaru, Gemini, and HET. In 2009, each telescope of the Keck, VLT, Gemini, Subaru, and HET observatories produced 135, 109, 93, 107, and 5 refereed papers, respectively. We have shown that each telescope of the Keck, VLT, Gemini, and Subaru observatories is producing 2.1 +/- 0.9 Nature and Science papers annually and the rate of these papers among all the refereed papers produced by using that telescope is 1.7 +/- 0.8 %. Extending this relation, we propose that this ratio of the number of Nature and Science papers over the number of whole refereed papers that will be produced by future extremely large telescopes (ELTs) will be remained similar. From the comparison of the publication trends of the above telescopes, we suggest that (i) having more than one telescope of the same kind at the same location and (ii) increasing the number of instruments available at the telescope are good ways to maximize the paper productivity.

قيم البحث

اقرأ أيضاً

Combined studies of variable stars and stellar clusters open great horizons, and they allow us to improve our understanding of stellar cluster formation and stellar evolution. In that prospect, the Gaia mission will provide astrometric, photometric, and spectroscopic data for about one billion stars of the Milky Way. This will represent a major census of stellar clusters, and it will drastically increase the number of known variable stars. In particular, the peculiar Gaia scanning law offers the opportunity to investigate the rather unexplored domain of short timescale variability (from tens of seconds to a dozen of hours), bringing invaluable clues to the fields of stellar physics and stellar aggregates. We assess the Gaia capabilities in terms of short timescale variability detection, using extensive light-curve simulations for various variable object types. We show that Gaia can detect periodic variability phenomena with amplitude variations larger than a few millimagnitudes. Additionally, we plan to perform subsequent follow-up of variables stars detected in clusters by Gaia to better characterize them. Hence, we develop a pipeline for the analysis of high cadence photometry from ground-based telescopes such as the 1.2m Euler telescope (La Silla, Chile) and the 1.2m Mercator telescope (La Palma, Canary Islands).
Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on t he WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.
Ground-based thermal-infrared observations have a unique scientific potential, but are also extremely challenging due to the need to accurately subtract the high thermal background. Since the established techniques of chopping and nodding need to be modified for observations with the future mid-infrared ELT imager and spectrograph (METIS), we investigate the sources of thermal background subtraction residuals. Our aim is to either remove or at least minimise the need for nodding in order to increase the observing efficiency for METIS. To this end we need to improve our knowledge about the origin of chop residuals and devise observing methods to remove them most efficiently, i.e. with the slowest possible nodding frequency. Thanks to dedicated observations with VLT/VISIR and GranTeCan/CanariCam, we have successfully traced the origin of three kinds of chopping residuals to (1) the entrance window, (2) the spiders and (3) other warm emitters in the pupil, in particular the VLT M3 mirror cell in its parking position. We conclude that, in order to keep chopping residuals stable over a long time (and therefore allow for slower nodding cycles), the pupil illumination needs to be kept constant, i.e. (imaging) observations should be performed in pupil-stabilised, rather than field-stabilised mode, with image de-rotation in the post-processing pipeline. This is now foreseen as the default observing concept for all METIS imaging modes.
The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrar ed on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, Canary Islands, will be described in this paper. In particular, we will look at the design and status of our low order curvature wavefront sensor which has been somewhat simplified to make it more efficient, ensuring coverage over much of the sky with natural guide stars as reference object. AOLI uses optically butted electron multiplying CCDs to give an imaging array of 2000 x 2000 pixels.
68 - I.J.M. Crossfield 2016
The study of extrasolar planets has rapidly expanded to encompass the search for new planets, measurements of sizes and masses, models of planetary interiors, planetary demographics and occurrence frequencies, the characterization of planetary orbits and dynamics, and studies of these worlds complex atmospheres. Our insights into exoplanets dramatically advance whenever improved tools and techniques become available, and surely the largest tools now being planned are the optical/infrared Extremely Large Telescopes (ELTs). Two themes summarize the advantages of atmospheric studies with the ELTs: high angular resolution when operating at the diffraction limit and high spectral resolution enabled by the unprecedented collecting area of these large telescopes. This brief review describes new opportunities afforded by the ELTs to study the composition, structure, dynamics, and evolution of these planets atmospheres, while specifically focusing on some of the most compelling atmospheric science cases for four qualitatively different planet populations: highly irradiated gas giants, young, hot giant planets, old, cold gas giants, and small planets and Earth analogs.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا