اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTime-dependent MHD shocks and line intensity ratios in the HH 30 jet: A focus on cooling function and numerical resolution
60
0
0.0
(
0
)
تأليف
O. Tesileanu
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The coupling between time-dependent, multidimensional MHD numerical codes and radiative line emission is of utmost importance in the studies of the interplay between dynamical and radiative processes in many astrophysical environments, with particular interest for problems involving radiative shocks. There is a widespread consensus that line emitting knots observed in Herbig-Haro jets can be interpreted as radiative shocks. In this paper we address two different aspects relevant to the time-dependent calculations of the line intensity ratios of forbidden transitions, resulting from the excitation by planar, time-dependent radiative shocks traveling in a stratified medium. The first one concerns the impact of the radiation and ionization processes included in the cooling model, and the second one the effects of the numerical grid resolution. In this paper we apply the AMR methodology to the treatment of radiating shocks and show how this method is able to vastly reduce the integration time. The technique is applied to the knots of the HH 30 jet to obtain the observed line intensity ratios and derive the physical parameters, such as density, temperature and ionization fraction. We consider the impact of two different cooling functions and different grid resolutions on the results. We conclude that the use of different cooling routines has effects on results whose weight depends upon the line ratio considered. Moreover, we find the minimum numerical resolution of the simulation grid behind the shock to achieve convergence in the results. This is crucial for the forthcoming 2D calculations of radiative shocks.
قيم البحث
اقرأ أيضاً
Diagnostics of MHD waves in the solar atmosphere is a topic which often encounters problems of interpretation, due partly to the high complexity of the solar atmospheric medium. Forward modeling can significantly guide interpretation, bridging the ga
p between numerical simulations and observations, and increasing the reliability of mode identification for application of MHD seismology. In this work we aim at determining the characteristics of the fast MHD sausage mode in the corona on the modulation of observable quantities such as line intensity and spectral line broadening. Effects of line-of-sight angle, and spatial, temporal and spectral resolutions are considered. We take a cylindrical tube simulating a loop in a low-{beta} coronal environment with an optically thin background, and let it oscillate with the fast sausage mode. A parametric study is performed. Among other results, we show that regardless of the ionisation state of the plasma, the variation of spectral line broadening can be significant, even for low intensity modulation. The nature of this broadening is not thermal but is mostly turbulent. This places spectrometers in clear advantage over imaging instruments for the detection of the sausage mode. The modulation of all quantities is considerably affected by the line-of-sight angle, and especially by the spatial and temporal resolution when these are on the order of the modes wavelength and period. This places high constraints on instrumentation.
We present Hubble Space Telescope (HST) Near-Infrared Camera and Multi-object Spectrometer (NICMOS) observations of the reflection nebulosity associated with the T Tauri star HH 30. The images show the scattered light pattern characteristic of a high
ly inclined, optically thick disk with a prominent dustlane whose width decreases with increasing wavelength. The reflected nebulosity exhibits a lateral asymmetry in the upper lobe on the opposite side to that reported in previously published Wide Field Planetary Camera 2 (WFPC2) images. The radiation transfer model which most closely reproduces the data has a flared accretion disk with dust grains larger than standard interstellar medium grains by a factor of approximately 2.1. A single hotspot on the stellar surface provides the necessary asymmetry to fit the images and is consistent with previous modeling of the light curve and images. Photometric analysis results in an estimated extinction of Av>~80; however, since the photometry measures only scattered light rather than direct stellar flux, this a lower limit. The radiative transfer models require an extinction of Av = 7,900.
Changes in the solar surface area covered by small-scale magnetic elements are thought to cause long-term changes in the solar spectral irradiance, which are important for determining the impact on Earths climate. To study the effect of small-scale m
agnetic elements on total and spectral irradiance, we derive their contrasts from 3-D MHD simulations of the solar atmosphere. Such calculations are necessary since measurements of small-scale flux tube contrasts are confined to a few wavelengths and suffer from scattered light and instrument defocus, even for space observations. To test the contrast calculations, we compare rms contrasts from simulations with those obtained with the broad-band filter imager mounted on the Solar Optical Telescope (SOT) onboard the Hinode satellite and also analyse centre-to-limb variations (CLV). The 3-D MHD simulations include the interaction between convection and magnetic flux tubes. They have been run with non-grey radiative transfer using the MURaM code. Simulations have an average vertical magnetic field of 0G, 50G, and 200G. Emergent intensities are calculated with the spectral synthesis code ATLAS9 and are convolved with a theoretical point-spread function to account for the properties of the observations optical system. We find reasonable agreement for simulated and observed intensity distributions in the visible continuum bands. Agreement is poorer for the CN and G-Bands. The analysis of the simulations exhibits a potentially more realistic centre-to-limb behaviour than calculations based on 1-D model atmospheres. We conclude that starting from 3-D MHD simulations represents a powerful approach to obtaining intensity contrasts for a wide wavelength coverage and for different positions on the solar disk. This also paves the way for future calculations of facular and network contrast as a function of magnetic fluxes.
Knotty structures of Herbig-Haro jets are common phenomena, and knowing the origin of these structures is essential for understanding the processes of jet formation. Basically, there are two theoretical approaches: different types of instabilities in
stationary flow, and velocity variations in the flow. We investigate the structures with different radial velocities in the knots of the HL Tau jet as well as its unusual behaviour starting from 20 arcsec from the source. Collation of radial velocity data with proper motion measurements of emission structures in the jet of HL Tau makes it possible to understand the origin of these structures and decide on the mechanism for the formation of the knotty structures in Herbig-Haro flows. We present observations obtained with a 6 m telescope (Russia) using the SCORPIO camera with scanning Fabry-Perot interferometer. Two epochs of the observations of the HL/XZ Tau region in Halpha emission (2001 and 2007) allowed us to measure proper motions for high and low radial velocity structures. The structures with low and high radial velocities in the HL Tau jet show the same proper motion. The point where the HL Tau jet bents to the north (it coincides with the trailing edge of so-called knot A) is stationary, i.e. does not have any perceptible proper motion and is visible in Halpha emission only. We conclude that the high- and low- velocity structures in the HL Tau jet represent bow-shocks and Mach disks in the internal working surfaces of episodic outflows. The bend of the jet and the brightness increase starting some distance from the source coincides with the observed stationary deflecting shock. The increase of relative surface brightness of bow-shocks could be the result of the abrupt change of the physical conditions of the ambient medium as well as the interaction of a highly collimated flow and the side wind from XZ Tau.
We have used an electron beam ion trap to measure electron-density-diagnostic line-intensity ratios for extreme ultraviolet lines from F XII, XIII, and XIV at wavelengths of 185-205 255-276 Angstroms. These ratios can be used as density diagnostics f
or astrophysical spectra and are especially relevant to solar physics. We found that density diagnostics using the Fe XIII 196.53/202.04 and the Fe XIV 264.79/274.21 and 270.52A/274.21 line ratios are reliable using the atomic data calculated with the Flexible Atomic Code. On the other hand, we found a large discrepancy between the FAC theory and experiment for the commonly used Fe XII (186.85 + 186.88)/195.12 line ratio. These FAC theory calculations give similar results to the data tabulated in CHIANTI, which are commonly used to analyze solar observations. Our results suggest that the discrepancies seen between solar coronal density measurements using the Fe XII (186.85 + 186.88)/195.12 and Fe XIII 196.54/202.04 line ratios are likely due to issues with the atomic calculations for Fe XII.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
