اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدElectrical Switching Dynamics in Circular and Rectangular Ge2Sb2Te5 Nanopillar Phase Change Memory Devices
257
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We have measured the critical phase change conditions induced by electrical pulses in Ge2Sb2Te5 nanopillar phase change memory devices by constructing a comprehensive resistance map as a function of pulse parameters (width, amplitude and trailing edge). Our measurements reveal that the heating scheme and the details of the contact geometry play the dominant role in determining the final phase composition of the device such that a non-uniform heating scheme promotes partial amorphization/crystallization for a wide range of pulse parameters enabling multiple resistance levels for data storage applications. Furthermore we find that fluctuations in the snap-back voltage and set/reset resistances in repeated switching experiments are related to the details of the current distribution such that a uniform current injection geometry (i.e. circular contact) favors more reproducible switching parameters. This shows that possible geometrical defects in nanoscale phase change memory devices may play an essential role in the performance of the smallest possible devices through modification of the exact current distribution in the active chalcogenide layer. We present a three-dimensional finite element model of the electro-thermal physics to provide insights into the underlying physical mechanisms of the switching dynamics as well as to quantitatively account for the scaling behaviour of the switching currents in both circular and rectangular contact geometries. The calculated temporal evolution of the heat distribution within the pulse duration shows distinct features in rectangular contacts providing evidence for locally hot spots at the sharp corners of the current injection site due to current crowding effects leading to the observed behaviour.
قيم البحث
اقرأ أيضاً
Vanadium dioxide is a correlated electron system that features a metal-insulator phase transition (MIT) above room temperature and is of interest in high speed switching devices. Here, we integrate VO2 into two-terminal coplanar waveguides and demons
trate a large resistance modulation of the same magnitude (>10^3) in both electrically (i.e. by bias voltage, referred to as E-MIT) and thermally (T-MIT) driven transitions. We examine transient switching characteristics of the E-MIT and observe two distinguishable time scales for switching. We find an abrupt jump in conductivity with a rise time of the order of 10 ns followed by an oscillatory damping to steady state on the order of several {mu}s. We characterize the RF power response in the On state and find that high RF input power drives VO2 further into the metallic phase, indicating that electromagnetic radiation-switching of the phase transition may be possible. We measure S-parameter RF properties up to 13.5 GHz. Insertion loss is markedly flat at 2.95 dB across the frequency range in the On state and sufficient isolation of over 25 dB is observed in the Off state. We are able to simulate the RF response accurately using both lumped element and 3D electromagnetic models. Extrapolation of our results suggests that optimizing device geometry can reduce insertion loss further and maintain broadband flatness up to 40 GHz.
Phase change memory (PCM) is one of the leading candidates for neuromorphic hardware and has recently matured as a storage class memory. Yet, energy and power consumption remain key challenges for this technology because part of the PCM device must b
e self-heated to its melting temperature during reset. Here, we show that this reset energy can be reduced by nearly two orders of magnitude by minimizing the pulse width. We utilize a high-speed measurement setup to probe the energy consumption in PCM cells with varying pulse width (0.3 to 40 nanoseconds) and uncover the power dissipation dynamics. A key finding is that the switching power (P) remains unchanged for pulses wider than a short thermal time constant of the PCM ($tau$$_t$$_h$ < 1 ns in 50 nm diameter device), resulting in a decrease of energy (E=P$tau$) as the pulse width $tau$ is reduced in that range. In other words, thermal confinement during short pulses is achieved by limiting the heat diffusion time. Our improved programming scheme reduces reset energy density below 0.1 nJ/$mu$m$^2$, over an order of magnitude lower than state-of-the-art PCM, potentially changing the roadmap of future data storage technology and paving the way towards energy-efficient neuromorphic hardware
We demonstrate the electrical detection of magnon-magnon hybrid dynamics in yttrium iron garnet/permalloy (YIG/Py) thin film bilayer devices. Direct microwave current injection through the conductive Py layer excites the hybrid dynamics consisting of
the uniform mode of Py and the first standing spin wave ($n=1$) mode of YIG, which are coupled via interfacial exchange. Both the two hybrid modes, with Py or YIG dominated excitations, can be detected via the spin rectification signals from the conductive Py layer, providing phase resolution of the coupled dynamics. The phase characterization is also applied to a nonlocally excited Py device, revealing the additional phase shift due to the perpendicular Oersted field. Our results provide a device platform for exploring hybrid magnonic dynamics and probing their phases, which are crucial for implementing coherent information processing with magnon excitations
Resistance drift in phase change materials is characterized in amorphous phase change memory line-cells from 300 K to 125 K range and is observed to follow the previously reported power-law behavior with drift coefficients in the 0.07 to 0.11 range i
n dark. While these drift coefficients measured in dark are similar to commonly observed drift coefficients (~0.1) at and above room temperature, measurements under light show a significantly lower drift coefficient (0.05 under illumination versus 0.09 in dark at 150K). Periodic on/off switching of light shows sudden decrease/increase of resistance, attributed to photo-excited carriers, followed by a very slow response (~30 minutes at 150 K) attributed to contribution of charge traps. Continuation of the resistance drift at low temperatures and the observed photo-response suggest that resistance drift in amorphous phase change materials is predominantly an electronic process.
We model electrical conductivity in metastable amorphous $Ge_{2}Sb_{2}Te_{5}$ using independent contributions from temperature and electric field to simulate phase change memory devices and Ovonic threshold switches. 3D, 2D-rotational, and 2D finite
element simulations of pillar cells capture threshold switching and show filamentary conduction in the on-state. The model can be tuned to capture switching fields from ~5 to 40 MV/m at room temperature using the temperature dependent electrical conductivity measured for metastable amorphous GST; lower and higher fields are obtainable using different temperature dependent electrical conductivities. We use a 2D fixed out-of-plane-depth simulation to simulate an Ovonic threshold switch in series with a $Ge_{2}Sb_{2}Te_{5}$ phase change memory cell to emulate a crossbar memory element. The simulation reproduces the pre-switching current and voltage characteristics found experimentally for the switch + memory cell, isolated switch, and isolated memory cell.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
