اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدExperimental and First principle calculation of Co_xNi_{(1-x)}Si solid solution structural stability
524
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report the investigation of the structural stability of Co$_{(1-x)}$Ni$_x$Si monosilicides for $0<x<1$. As CoSi crystallizes in the FeSi-type structure (B20) and NiSi is stable in the MnP-type structure (B31), a complete set of samples has been synthesized and a systematic study of phase formation under different annealing conditions were carried out in order to understand the reason of such a structural transition when x goes from 0 to 1. This study has revealed a limit in the solubility of Ni in CoSi B20 structure of about 17.5 at.% and of Co in NiSi B31 phase of about 13 at.%. For $0.35<x<0.74$ both B20 and B31 phases are present in the sample at there respective limits of solubility. The temperature dependence of the magnetic susceptibility has also been measured revealing diamagnetic behaviors. Optimal structural parameters and phase stability of the solid solution have been investigated using self-consistent full-potential linearized augmented plane wave method (FP-LAPW) based on the density functional theory (DFT). This calculation well predicts the structural instability observed experimentally.
قيم البحث
اقرأ أيضاً
We present a new technique which allows the fully {em ab initio} calculation of the chemical potential of a substitutional impurity in a high-temperature crystal, including harmonic and anharmonic lattice vibrations. The technique uses the combinatio
n of thermodynamic integration and reference models developed recently for the {em ab initio} calculation of the free energy of liquids and anharmonic solids. We apply the technique to the case of the substitutional oxygen impurity in h.c.p. iron under Earths core conditions, which earlier static {em ab initio} calculations indicated to be thermodynamically very unstable. Our results show that entropic effects arising from the large vibrational amplitude of the oxygen impurity give a major reduction of the oxygen chemical potential, so that oxygen dissolved in h.c.p. iron may be stabilised at concentrations up a few mol % under core conditions.
Chemisorption of CO on the stepped Cu(211) surface is studied within ab-initio density functional theory (DFT) and scanning tunneling microscopy (STM) imaging as well as manipulation experiments. Theoretically we focus on the experimentally observed
ordered (2x1) and (3x1) CO-phases at coverages 1/3, 1/2 and 2/3 monolayer (ML). To obtain also information for isolated CO molecules found randomly distributed at low coverages, we also performed calculations for a hypothetical (3x1) phase with 1/3 ML. The adsorption geometry, the stretching frequencies, the work functions and adsorption energies of the CO molecules in the different phases are presented and compared to experimental data. Initially and up to a coverage of 1/2 ML CO adsorbs upright on the on-top sites at step edge atoms. Determining the most favorable adsorption geometry for the 2/3 ML ordered phase turned out to be nontrivial both from the experimental and the theoretical point of view. Experimentally, both top-bridge and top-top configurations were reported, whereby only the top-top arrangement was firmly established. The calculated adsorption energies and the stretching frequencies favor the top-bridge configuration. The possible existence of both configurations at 2/3 ML is critically discussed on the basis of the presently accessible experimental and theoretical data. In addition, we present observations of STM manipulation experiments and corresponding theoretical results, which show that CO adsorbed on-top of a single Cu-adatom, which is manipulated to a location close to the lower step edge, is stronger bound than CO on-top of a step edge atom.
In this paper, we propose a first principle calculation method for the effective Zeemans coupling based on the second perturbation theory and apply it to a few topological materials. For Bi and Bi$_2$Se$_3$, our numerical results are in good accord w
ith the experimental data; for Na$_3$Bi, TaN, and ZrTe$_5$, the structure of the multi-bands Zeemans couplings are discussed. Especially, we discuss the impact of Zeemans coupling on the Fermi surfaces topology in Na$_3$Bi in detail.
Structural and electronic properties of zinc blende TlxIn(1-x)N alloy have been evaluated from first principles. The band structures have been obtained within the density functional theory (DFT), the modified Becke-Johnson (MBJLDA) approach for the e
xchange-correlation potential, and fully relativistic pseudopotentials. The calculated band-gap dependence on Tl content in this hypothetical alloy exhibits a linear behaviour up to the 25 % of thalium content where its values become close to zero. In turn, the split-off energy at the Gamma point of the Brillouin zone, related to the spin-orbit coupling, is predicted to be comparable in value with the band-gap for relatively low thalium contents of about 5 %. These findings suggest TlxIn(1-x)N alloy as a promising material for optoelectronic applications. Furthermore, the band structure of TlN reveals some specific properties exhibited by topological insulators.
We investigate the macroscopic and microscopic physical properties of the solid solution of Ce$_{1-x}$Pr$_{x}$AlGe. The series tunes from CeAlGe with its multi-$vec{k}$ structure and a major Moment in the ab-plane, to PrAlGe with an easy-c-axis ferro
magnetic ground state co-existing with a low density of nanoscale textured magnetic Domain walls. Using AC-, DC-susceptiblity, resistivity, specific heat, muon spin relaxation/rotation and neutron scattering we analyze the magnetic ground state of the series. We provide further evidence supporting our previous claim for spin-glass like properties in pure PrAlGe. With introduction of Pr to CeAlGe the finite magnetic field required to stabilize the topological multi-$vec{k}$ magnetic phase for $x=0$ becomes suppressed. The crossover between the two end-member ground states occurs in the vicinity of $x=0.3$, a region where we further anticipate the field-induced topological magnetic phase for $x < 0.3$ to become the zero field ground state.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
