اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDislocation contrast in cathodoluminescence and electron-beam induced current maps on GaN(0001)
485
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We theoretically analyze the contrast observed at the outcrop of a threading dislocation at the GaN(0001) surface in cathodoluminescence and electron-beam induced current maps. We consider exciton diffusion and recombination including finite recombination velocities both at the planar surface and at the dislocation. Formulating the reciprocity theorem for this general case enables us to provide a rigorous analytical solution of this diffusion-recombination problem. The results of the calculations are applied to an experimental example to determine both the exciton diffusion length and the recombination strength of threading dislocations in a free-standing GaN layer with a dislocation density of $6times10^{5}$~cm$^{-2}$.
قيم البحث
اقرأ أيضاً
The strain field of a dislocation emerging at a free surface is partially relaxed to ensure stress free boundary conditions. We show that this relaxation strain at the outcrop of edge threading dislocations in GaN{0001} gives rise to a piezoelectric
volume charge. The electric field produced by this charge distribution is strong enough to dissociate free excitons at distances over 100 nm from the dislocation line. We evaluate the impact of this effect on cathodoluminescence images of dislocations.
Electron beam induced current (EBIC) is a powerful technique which measures the charge collection efficiency of photovoltaics with sub-micron spatial resolution. The exciting electron beam results in a high generation rate density of electron-hole pa
irs, which may drive the system into nonlinear regimes. An analytic model is presented which describes the EBIC response when the {it total} electron-hole pair generation rate exceeds the rate at which carriers are extracted by the photovoltaic cell, and charge accumulation and screening occur. The model provides a simple estimate of the onset of the high injection regime in terms of the material resistivity and thickness, and provides a straightforward way to predict the EBIC lineshape in the high injection regime. The model is verified by comparing its predictions to numerical simulations in 1 and 2 dimensions. Features of the experimental data, such as the magnitude and position of maximum collection efficiency versus electron beam current, are consistent with the 3 dimensional model.
Electron beam induced current (EBIC) is a powerful characterization technique which offers the high spatial resolution needed to study polycrystalline solar cells. Ideally, an EBIC measurement reflects the spatially resolved quantum efficiency of the
device. In this work, a model for EBIC measurements is presented which applies when recombination within the depletion region is substantial. This model is motivated by cross-sectional EBIC experiments on CdS-CdTe photovoltaic cells which show that the maximum efficiency of carrier collection is less than 100 % and varies throughout the depletion region. The model can reproduce experimental results only if the mobility-lifetime product $mutau$ is spatially varying within the depletion region. The reduced collection efficiency is speculated to be related to high-injection effects, and the resulting increased radiative recombination.
We investigate, both theoretically and experimentally, the drift, diffusion, and recombination of excitons in the strain field of an edge threading dislocation intersecting the GaN{0001} surface. We calculate and measure hyperspectral cathodoluminesc
ence maps around the dislocation outcrop for temperatures between 10 to 200 K. Contrary to common belief, the cathodoluminescence intensity contrast is only weakly affected by exciton diffusion, but is caused primarily by exciton dissociation in the piezoelectric field at the dislocation outcrop. Hence, the extension of the dark spots around dislocations in the luminescence maps cannot be used to determine the exciton diffusion length. However, the cathodoluminescence energy contrast, reflecting the local bandgap variation in the dislocation strain field, does sensitively depend on the exciton diffusion length and hence enables its experimental determination.
MnAs has been grown by means of MBE on the GaN(0001)-(1x1) surface. Two options of initiating the crystal growth were applied: (a) a regular MBE procedure (manganese and arsenic were delivered simultaneously) and (b) subsequent deposition of manganes
e and arsenic layers. It was shown that spontaneous formation of MnAs dots with the surface density of 1$cdot 10^{11}$ cm$^{-2}$ and $2.5cdot 10^{11}$ cm$^{-2}$, respectively (as observed by AFM), occurred for the layer thickness higher than 5 ML. Electronic structure of the MnAs/GaN systems was studied by resonant photoemission spectroscopy. That led to determination of the Mn 3d - related contribution to the total density of states (DOS) distribution of MnAs. It has been proven that the electronic structures of the MnAs dots grown by the two procedures differ markedly. One corresponds to metallic, ferromagnetic NiAs-type MnAs, the other is similar to that reported for half-metallic zinc-blende MnAs. Both system behave superparamagnetically (as revealed by magnetization measurements), but with both the blocking temperatures and the intra-dot Curie temperatures substantially different. The intra-dot Curie temperature is about 260 K for the former system while markedly higher than room temperature for the latter one. Relations between growth process, electronic structure and other properties of the studied systems are discussed. Possible mechanisms of half-metallic MnAs formation on GaN are considered.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
