اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدImpact of Nonuniform Thermionic Emission on the Transition Behavior between Temperature- and Space-Charge-Limited Emission
63
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Experimental observations have long-established that there exists a smooth roll-off or knee transition between the temperature-limited (TL) and full-space-charge-limited (FSCL) emission regions of the emission current density-temperature J-T (Miram) curve, or the emission current density-voltage J-V curve for a thermionic emission cathode. In this paper, we demonstrate that this experimentally observed smooth transition does not require frequently used a priori assumptions of a continuous distribution of work functions on the cathode surface. Instead, we find the smooth transition arises as a natural consequence of the physics of nonuniform thermionic emission from a spatially heterogeneous cathode surface. We obtain this smooth transition for both J-T and J-V curves using a predictive nonuniform thermionic emission model that includes 3-D space charge, patch fields (electrostatic potential nonuniformity on the cathode surface based on local work function values), and Schottky barrier lowering physics and illustrate that a smooth knee can arise from a thermionic cathode surface with as few as two discrete work function values. Importantly, we find that the inclusion of patch field effects is crucial for obtaining accurate J-T and J-V curves, and the further inclusion of Schottky barrier lowering is needed for accurate J-V curves. This finding, and the emission model provided in this paper have important implications for modeling electron emission from realistic, heterogeneous surfaces. Such modeling is important for improved understanding of the interplay of emission physics, cathode materials engineering, and design of numerous devices employing electron emission cathodes.
قيم البحث
اقرأ أيضاً
Many high power electronic devices operate in a regime where the current they draw is limited by the self-fields of the particles. This space-charge-limited current poses particular challenges for numerical modeling where common techniques like over-
emission or Gauss Law are computationally inefficient or produce nonphysical effects. In this paper we show an algorithm using the value of the electric field in front of the surface instead of attempting to zero the field at the surface, making the algorithm particularly well suited to both electromagnetic and parallel implementations of the PIC algorithm. We show how the algorithm is self-consistent within the framework of finite difference (for both electrostatics and electromagnetics). We show several 1D and 2D benchmarks against both theory and previous computational results. Finally we show application in 3D to high power microwave generation in a 13 GHz magnetically insulated line oscillator.
Injection from metallic electrodes serves as a main channel of charge generation in organic semiconducting devices and the quantum effect is normally regarded to be essential. We develop a dynamic approach based upon the surface hopping (SH) algorith
m and classical device modeling, by which both quantum tunneling and thermionic emission of charge carrier injection at metal/organic interfaces are concurrently investigated. The injected charges from metallic electrode are observed to quickly spread onto the organic molecules following by an accumulation close to the interface induced by the built-in electric field, exhibiting a transition from delocalization to localization. We compare the Ehrenfest dynamics on mean-field level and the SH algorithm by simulating the temperature dependence of charge injection dynamics, and it is found that the former one leads to an improper result that the injection efficiency decreases with increasing temperature at room-temperature regime while SH results are credible. The relationship between injected charges and the applied bias voltage suggests it is the quantum tunneling that dominates the low-threshold injection characteristics in molecular crystals, which is further supported by the calculation results of small entropy change during the injection processes. An optimum interfacial width for charge injection efficiency at the interface is also quantified and can be utilized to understand the role of interfacial buffer layer in practical devices.
The reverse leakage current through a Schottky barrier transitions from a thermionic-emission dominated regime to a barrier-tunneling dominated regime as the surface electric field increases. In this study, we evaluate such transition electric field
($E_{rm T}$) in $beta$-Ga$_{2}$O$_{3}$ using a numerical reverse leakage model. $E_{rm T}$ is found to have very weak dependence on the doping concentration and barrier height, thus a near-universal temperature dependence suffices and is given by a simple empirical expression in Ga$_{2}$O$_{3}$. With the help of a field-plate design, we observed experimentally in Ga$_{2}$O$_{3}$ Schottky barrier diodes a near-ideal bulk reverse leakage characteristics, which matches well with our numerical model and confirms the presence of the transition region. Near the transition electric field, both thermionic emission and barrier tunneling should be considered. The study provides important guidance toward accurate design and modeling of ideal reverse leakage characteristics in $beta$-Ga$_{2}$O$_{3}$ Schottky barrier diodes.
An undoped AlGaN/GaN nanowire demonstrated p-type conductivity based solely on the formation of hole carriers in response to the negative polarization field at the (000-1) AlGaN/GaN facet. A transistor based on this nanowire displayed a low-voltage t
ransition from Ohmic to space charge limited conduction. A numerical simulation showed that a highly asymmetric strain exists across the triangular cross-section, which creates a doublet peak in the piezoelectric induced polarization sheet charge at the (000-1) facet. Additionally, there is a strong interplay between the charge at the (000-1) AlGaN/GaN interface with depletion from the three surfaces as well as an interaction with the opposing polarization fields at two semi-polar {-110-1} facets. The charge distribution and resultant conduction regime is highly interdependent on configuration of the multi-layer structure, and is not amenable to an analytical model.
Tailoring the photoluminescence (PL) properties in two-dimensional (2D) molybdenum disulfide (MoS2) crystals using external factors is critical for its use in valleytronic, nanophotonic and optoelectronic applications. Although significant effort has
been devoted towards enhancing or manipulating the excitonic emission in MoS2 monolayers, the excitonic emission in few-layers MoS2 has been largely unexplored. Here, we put forward a novel nano-heterojunction system, prepared with a non-lithographic process, to enhance and control such emission. It is based on the incorporation of few-layers MoS2 into a plasmonic silver metaphosphate glass (AgPO3) matrix. It is shown that, apart from the enhancement of the emission of both A and B excitons, the B-excitonic emission dominates the PL intensity. In particular, we observe an almost six-fold enhancement of the B exciton emission, compared to control MoS2 samples. This enhanced PL at room temperature is attributed to an enhanced exciton-plasmon coupling and it is supported by ultrafast time-resolved spectroscopy that reveals plasmon-enhanced electron transfer that takes place in Ag nanoparticles-MoS2 nanoheterojunctions. Our results provide a great avenue to tailor the emission properties of few-layers MoS2, which could find application in emerging valleytronic devices working with B excitons.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
