ترغب بنشر مسار تعليمي؟ اضغط هنا

Li-diffusion accelerates grain growth in intercalation electrodes: a phase-field study

206   0   0.0 ( 0 )
 نشر من قبل Ananya Renuka Balakrishna
 تاريخ النشر 2018
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Grain boundary migration is driven by the boundarys curvature and external loads such as temperature and stress. In intercalation electrodes an additional driving force results from Li-diffusion. That is, Li-intercalation induces volume expansion of the host-electrode, which is stored as elastic energy in the system. This stored energy is hypothesized as an additional driving force for grain boundaries and edge dislocations. Here, we apply the 2D Cahn-Hilliard$-$phase-field-crystal (CH-PFC) model to investigate the coupled interactions between highly mobile Li-ions and host-electrode lattice structure, during an electrochemical cycle. We use a polycrystalline FePO$_{4}$/ LiFePO$_{4}$ electrode particle as a model system. We compute grain growth in the FePO$_{4}$ electrode in two parallel studies: In the first study, we electrochemically cycle the electrode and calculate Li-diffusion assisted grain growth. In the second study, we do not cycle the electrode and calculate the curvature-driven grain growth. External loads, such as temperature and stress, did not differ across studies. We find the mean grain-size increases by $sim11%$ in the electrochemically cycled electrode particle. By contrast, in the absence of electrochemical cycling, we find the mean grain-size increases by $sim2%$ in the electrode particle. These CH-PFC computations suggest that Li-intercalation accelerates grain-boundary migration in the host-electrode particle. The CH-PFC simulations provide atomistic insights on diffusion-induced grain-boundary migration, edge dislocation movement and triple-junction drag-effect in the host-electrode microstructure.



قيم البحث

اقرأ أيضاً

425 - E. Hazrati , G. A. de Wijs , 2014
Modeling layered intercalation compounds from first principles poses a problem, as many of their properties are determined by a subtle balance between van der Waals interactions and chemical or Madelung terms, and a good description of van der Waals interactions is often lacking. Using van der Waals density functionals we study the structures, phonons and energetics of the archetype layered intercalation compound Li-graphite. Intercalation of Li in graphite leads to stable systems with calculated intercalation energies of $-0.2$ to $-0.3$~eV/Li atom, (referred to bulk graphite and Li metal). The fully loaded stage 1 and stage 2 compounds LiC$_6$ and Li$_{1/2}$C$_6$ are stable, corresponding to two-dimensional $sqrt3timessqrt3$ lattices of Li atoms intercalated between two graphene planes. Stage $N>2$ structures are unstable compared to dilute stage 2 compounds with the same concentration. At elevated temperatures dilute stage 2 compounds easily become disordered, but the structure of Li$_{3/16}$C$_6$ is relatively stable, corresponding to a $sqrt7timessqrt7$ in-plane packing of Li atoms. First-principles calculations, along with a Bethe-Peierls model of finite temperature effects, allow for a microscopic description of the observed voltage profiles.
The essential properties of graphite-based 3D systems are thoroughly investigated by the first-principles method. Such materials cover a simple hexagonal graphite, a Bernal graphite, and the stage-1 to stage-4 Li/Li$^+$ graphite intercalation compoun ds. The delicate calculations and the detailed analyses are done for their optimal stacking configurations, bong lengths, interlayer distances, free electron $&$ hole densities, Fermi levels, transferred charges in chemical bondings, atom- or ion-dominated energy bands, spatial charge distributions and the significant variations after intercalation, Li-/Li$^+$- $&$ C-orbital-decomposed DOSs. The above-mentioned physical quantities are sufficient in determining the critical orbital hybridizations responsible for the unusual fundamental properties. How to dramatically alter the low-lying electronic structures by modulating the quest-atom/quest-ion concentration is one of focuses, e.g., the drastic changes on the Fermi level, band widths, and number of energy bands. The theoretical predictions on the stage-n-dependent band structures could be examined by the high-resolution angle-resolved photoemission spectroscopy (ARPES). Most important, the low-energy DOSs near the Fermi might provide the reliable data for estimating the free carrier density due to the interlayer atomic interactions or the quest-atom/quest-ion intercalation. The van Hove singularities, which mainly arise from the critical points in energy-wave-vector space, could be directly examined by the experimental measurements of scanning tunneling spectroscopy (STS). Their features should be very useful in distinguishing the important differences among the stage-$n$ graphite intercalation compounds, and the distinct effects due to the atom or ion decoration.
Thermal stability of nanocrystalline multilayer thin film is of paramount importance as the applications often involve high temperature. Here we report on the layer instability phenomenon in binary polycrystalline thin film initiating from the grain boundary migrations at higher temperatures using phase-field simulations. Effect of layer thickness, bilayer spacing and the absence of grain boundary are also investigated along with the grain boundary mobility of individual phases on the layer stability. Layer instability in the polycrystalline film is shown to arise from the grain boundary grooving which originates spontaneously from the presence of grain boundaries. Our results show that the growth of the perturbation generated from the differential curvature follows Plateau-Rayleigh instability criterion. Increase in layer thickness, lower bilayer thickness as well as lower grain boundary mobility improve layer stability. Phase-field simulations show similar microstructural evolution as has been observed in our Zirconium (Zr)/Zirconium Nitride (ZrN) system experimentally. Detail analysis performed in this work to understand the mechanisms of layer instability leads us to predict measures which will improve the thermal stability of multilayer nanocrystalline thin film.
108 - R. K. Koju , Y. Mishin 2020
Mg grain boundary (GB) segregation and GB diffusion can impact the processing and properties of Al-Mg alloys. Yet, Mg GB diffusion in Al has not been measured experimentally or predicted by simulations. We apply atomistic computer simulations to pred ict the amount and the free energy of Mg GB segregation, and the impact of segregation on GB diffusion of both alloy components. At low temperatures, Mg atoms segregated to a tilt GB form clusters with highly anisotropic shapes. Mg diffuses in Al GBs slower than Al itself, and both components diffuse slowly in comparison with Al GB self-diffusion. Thus, Mg segregation significantly reduces the rate of mass transport along GBs in Al-Mg alloys. The reduced atomic mobility can be responsible for the improved stability of the microstructure at elevated temperatures.
Transition metal dichalcogenides (TMDs), such as MoS$_2$, are known to undergo a structural phase transformation as well as a change in the electronic conductivity upon Li intercalation. These properties make them candidates for charge-tunable ion-in sertion materials that could be used in electro-chemical devices. In this work we study the phase stability and electronic structure of H and T$^prime$ Li-intercalated MoX$_2$ bilayers with X=S, Se, or Te. Using first-principles calculations in combination with classical and machine learning modeling approaches, we find that the H phase is more stable at low Li concentration for all X, and the critical Li concentration at which the T$^primeto$H transition occurs decreases with increasing mass of X. Furthermore the relative free energy of the two phases becomes less sensitive to Li insertion with increasing atomic mass of the chalcogen atom X. While the electronic conductivity increases with increasing ion concentration at low concentrations, we do not observe a (positive) conductivity jump at the phase transition from H to T$^prime$.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا