اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGrain Boundary Driven Plateau-Rayleigh Instability in Multilayer Nanocrystalline Thin Film: A Phase-field Study
125
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Thermal stability of nanocrystalline multilayer thin film is of paramount importance as the applications often involve high temperature. Here we report on the layer instability phenomenon in binary polycrystalline thin film initiating from the grain boundary migrations at higher temperatures using phase-field simulations. Effect of layer thickness, bilayer spacing and the absence of grain boundary are also investigated along with the grain boundary mobility of individual phases on the layer stability. Layer instability in the polycrystalline film is shown to arise from the grain boundary grooving which originates spontaneously from the presence of grain boundaries. Our results show that the growth of the perturbation generated from the differential curvature follows Plateau-Rayleigh instability criterion. Increase in layer thickness, lower bilayer thickness as well as lower grain boundary mobility improve layer stability. Phase-field simulations show similar microstructural evolution as has been observed in our Zirconium (Zr)/Zirconium Nitride (ZrN) system experimentally. Detail analysis performed in this work to understand the mechanisms of layer instability leads us to predict measures which will improve the thermal stability of multilayer nanocrystalline thin film.
قيم البحث
اقرأ أيضاً
We report on the discovery of a lead-free morphotropic phase boundary in Sm doped BiFeO3 with a simple perovskite structure using the combinatorial thin film strategy. The boundary is a rhombohedral to pseudo-orthorhombic structural transition which
exhibits a ferroelectric (FE) to antiferroelectric (AFE) transition at approximately Bi0.86Sm0.14FeO3 with dielectric constant and out-of-plane piezoelectric coefficient comparable to those of epitaxial (001) oriented Pb(Zr,Ti)O3 (PZT) thin films at the MPB. The discovered composition may be a strong candidate of a Pb-free piezoelectric replacement of PZT.
Mg grain boundary (GB) segregation and GB diffusion can impact the processing and properties of Al-Mg alloys. Yet, Mg GB diffusion in Al has not been measured experimentally or predicted by simulations. We apply atomistic computer simulations to pred
ict the amount and the free energy of Mg GB segregation, and the impact of segregation on GB diffusion of both alloy components. At low temperatures, Mg atoms segregated to a tilt GB form clusters with highly anisotropic shapes. Mg diffuses in Al GBs slower than Al itself, and both components diffuse slowly in comparison with Al GB self-diffusion. Thus, Mg segregation significantly reduces the rate of mass transport along GBs in Al-Mg alloys. The reduced atomic mobility can be responsible for the improved stability of the microstructure at elevated temperatures.
Grain boundary migration is driven by the boundarys curvature and external loads such as temperature and stress. In intercalation electrodes an additional driving force results from Li-diffusion. That is, Li-intercalation induces volume expansion of
the host-electrode, which is stored as elastic energy in the system. This stored energy is hypothesized as an additional driving force for grain boundaries and edge dislocations. Here, we apply the 2D Cahn-Hilliard$-$phase-field-crystal (CH-PFC) model to investigate the coupled interactions between highly mobile Li-ions and host-electrode lattice structure, during an electrochemical cycle. We use a polycrystalline FePO$_{4}$/ LiFePO$_{4}$ electrode particle as a model system. We compute grain growth in the FePO$_{4}$ electrode in two parallel studies: In the first study, we electrochemically cycle the electrode and calculate Li-diffusion assisted grain growth. In the second study, we do not cycle the electrode and calculate the curvature-driven grain growth. External loads, such as temperature and stress, did not differ across studies. We find the mean grain-size increases by $sim11%$ in the electrochemically cycled electrode particle. By contrast, in the absence of electrochemical cycling, we find the mean grain-size increases by $sim2%$ in the electrode particle. These CH-PFC computations suggest that Li-intercalation accelerates grain-boundary migration in the host-electrode particle. The CH-PFC simulations provide atomistic insights on diffusion-induced grain-boundary migration, edge dislocation movement and triple-junction drag-effect in the host-electrode microstructure.
Recently, based on the phase-field modeling, it was predicted that Hf1-xZrxO2 (HZO) exhibits the morphotropic phase boundary (MPB) in its compositional phase diagram. Here, we investigate the effect of structural changes between tetragonal (t) and or
thorhombic (o) phases on the ferroelectric and dielectric properties of HZO films to probe the existence of MPB region. The structural analysis show that by adjusting the ozone dosage during the atomic layer deposition process and annealing conditions, different ratios of t- to o-phases (f_(t/o) ) were achieved which consequently affect the ferroelectric and dielectric properties of the samples. Polarization versus electric field measurements show a remarkable increase in ferroelectric characteristics (Pr and Ec) of the sample that contains the minimum t-phase fraction (f_(t/o)~ 0.04). This sample shows the lowest dielectric constant compared to the other samples which is due to the formation of ferroelectric o-phase. The sample that contains the maximum f_(t/o)~ 0.41 demonstrates the highest dielectric response. By adjusting the f_(t/o), a large dielectric constant of ~ 55 is achieved. Our study reveals a direct relation between f_(t/o) and dielectric constant of HZO thin films which can be understood by considering the density of MPB region.
The surface charge associated with the spontaneous polarization in ferroelectrics is well known to cause a depolarizing field that can be particularly detrimental in the thin-film geometry desirable for microelectronic devices. Incomplete screening o
f the surface charge, for example by metallic electrodes or surface adsorbates, can lead to the formation of domains, suppression or reorientation of the polarization, or even stabilization of a higher energy non-polar phase . A huge amount of research and development effort has been invested in understanding the depolarizing behavior and minimizing its unfavorable effects. Here we demonstrate the opposite behavior: A strong polarizing field that drives thin films of materials that are centrosymmetric and paraelectric in their bulk form into a non-centrosymmetric, polar state. We illustrate the behavior using density functional computations for perovskite-structure potassium tantalate, KTaO$_3$, which is of considerable interest for its high dielectric constant, proximity to a quantum critical point and superconductivity. We then provide a simple recipe to identify whether a particular material and film orientation will exhibit the effect, and develop an electrostatic model to estimate the critical thickness of the induced polarization in terms of well-known material parameters. Our results provide practical guidelines for exploiting the electrostatic properties of thin-film ionic insulators to engineer novel functionalities for nanoscale devices.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
