اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThermal conductivity of InAs/GaSb superlattice
246
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The cross-plane thermal conductivity of a type II InAs/GaSb superlattice (T2SL) is measured from 13 K to 300 K using the 3{omega} method. Thermal conductivity is reduced by up to 2 orders of magnitude relative to the GaSb bulk substrate. The low thermal conductivity of around 1-8 W/mcdotK may serve as an advantage for thermoelectric applications at low temperatures, while presenting a challenge for T2SL quantum cascade lasers and high power light emitting diodes. We introduce a power-law approximation to model non-linearities in the thermal conductivity, resulting in increased or decreased peak temperature for negative or positive exponents, respectively.
قيم البحث
اقرأ أيضاً
We demonstrate an ab-initio predictive approach to computing the thermal conductivity ($kappa$) of InAs/GaAs superlattices (SLs) of varying period, thickness, and composition. Our new experimental results illustrate how this method can yield good agr
eement with experiment when realistic composition profiles are used as inputs for the theoretical model. Due to intrinsic limitations to the InAs thickness than can be grown, bulk-like SLs show limited sensitivity to the details of their composition profile, but the situation changes significantly when finite-thickness effects are considered. If In segregation could be minimized during the growth process, SLs with significantly higher $kappa$ than that of the random alloy with the same composition would be obtained, with the potential to improve heat dissipation in InAs/GaAs-based devices.
We report an enhancement of the electron spin relaxation time (T1) in a (110) InAs/GaSb superlattice by more than an order of magnitude (25 times) relative to the corresponding (001) structure. The spin dynamics were measured using polarization sensi
tive pump probe techniques and a mid-infrared, subpicosecond PPLN OPO. Longer T1 times in (110) superlattices are attributed to the suppression of the native interface asymmetry and bulk inversion asymmetry contributions to the precessional Dyakonov Perel spin relaxation process. Calculations using a nonperturbative 14-band nanostructure model give good agreement with experiment and indicate that possible structural inversion asymmetry contributions to T1 associated with compositional mixing at the superlattice interfaces may limit the observed spin lifetime in (110) superlattices. Our findings have implications for potential spintronics applications using InAs/GaSb heterostructures.
We report a configuration strategy for improving the thermoelectric (TE) performance of two-dimensional (2D) transition metal dichalcogenide (TMDC) WS2 based on the experimentally prepared WS2/WSe2 lateral superlattice (LS) crystal. On the basis of d
ensity function theory combined with Boltzmann transport equation, we show that the TE figure of merit zT of monolayer WS2 is remarkably enhanced when forming into a WS2/WSe2 LS crystal. This is primarily ascribed to the almost halved lattice thermal conductivity due to the enhanced anharmonic processes. Electronic transport properties parallel (xx) and perpendicular (yy) to the superlattice period are highly symmetric for both p- and n-doped LS owing to the nearly isotropic lifetime of charger carriers. The spin-orbital effect causes a significant split of conduction band and leads to three-fold degenerate sub-bands and high density of states (DOS), which offers opportunity to obtain the high n-type Seebeck coefficient (S). Interestingly, the separated degenerate sub-bands and upper conduction band in monolayer WS2 form a remarkable stairlike DOS, yielding a higher S. The hole carriers with much higher mobility than electrons reveal the high p-type power factor and the potential to be good p-type TE materials with optimal zT exceeds 1 at 400K in WS2/WSe2 LS.
In this paper, mid-wave infrared photodetection based on an InAs/GaSb type-II superlattice p-i-n photodetector grown directly on Si substrate is demonstrated and characterized. Excitation power dependence on integrated intensity from the photolumines
cence measurements reveals a power coefficient of P~I0.74, indicating that defects related process is playing an important role in the predominant recombination channel for photogenerated carriers. At 70 K, the device exhibits a dark current density of 2.3 A/cm2 under -0.1 V bias. Arrhenius analysis of dark current shows activation energies much less than half of the active layer bandgap, which suggests that the device is mainly limited by surface leakage and defect-assisted tunneling, consistent with the photoluminescence analysis. The detector shows 50% cutoff wavelength at ~5.5 um at 70 K under bias of -0.1 V. The corresponding peak responsivity and specific detectivity are 1.2 A/W and 1.3*10e9 cm*Hz1/2/W, respectively. Based on these optoelectronics characterization results, reduction of defects by optimizing the III/V-Si interface, and suppression of surface leakage channels are argued to be the main factors for performance improvement in this Si-based T2SL detector towards low cost, large-format MWIR detection system on Si photonics platform.
We present a detailed x-ray diffraction study of the strain in InAs/GaSb superlattices grown by molecular beam epitaxy. The superlattices were grown with either InSb or GaAs interfaces. We show that the superlattice morphology, either planar or nanos
tructured, is dependent on the chemical bonds at the heterointerfaces. In both cases, the misfit strain has been determined for the superlattice layers and the interfaces. We also determined how the magnitude and sign of this strain is crucial in governing the morphology of the superlattice. Our analysis suggests that the growth of self-assembled nanostructures may be extended to many systems generally thought to have too small a lattice mismatch.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
