اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEffect of Strain on the Growth of InAs/GaSb Superlattices: An X-Ray Study
121
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present a detailed x-ray diffraction study of the strain in InAs/GaSb superlattices grown by molecular beam epitaxy. The superlattices were grown with either InSb or GaAs interfaces. We show that the superlattice morphology, either planar or nanostructured, is dependent on the chemical bonds at the heterointerfaces. In both cases, the misfit strain has been determined for the superlattice layers and the interfaces. We also determined how the magnitude and sign of this strain is crucial in governing the morphology of the superlattice. Our analysis suggests that the growth of self-assembled nanostructures may be extended to many systems generally thought to have too small a lattice mismatch.
قيم البحث
اقرأ أيضاً
We report an enhancement of the electron spin relaxation time (T1) in a (110) InAs/GaSb superlattice by more than an order of magnitude (25 times) relative to the corresponding (001) structure. The spin dynamics were measured using polarization sensi
tive pump probe techniques and a mid-infrared, subpicosecond PPLN OPO. Longer T1 times in (110) superlattices are attributed to the suppression of the native interface asymmetry and bulk inversion asymmetry contributions to the precessional Dyakonov Perel spin relaxation process. Calculations using a nonperturbative 14-band nanostructure model give good agreement with experiment and indicate that possible structural inversion asymmetry contributions to T1 associated with compositional mixing at the superlattice interfaces may limit the observed spin lifetime in (110) superlattices. Our findings have implications for potential spintronics applications using InAs/GaSb heterostructures.
GaSb/InAs/GaSb layer stacks have been grown on InAs metamorphic substrates (pseudosubstrates) by MOVPE, using nitrogen as major carrier gas. We demonstrate that GaSb growth by nitrogen MOVPE on InAs metamorphic substrates (and on InAs wafers) is poss
ible in a very narrow range of growth parameters. As demonstrators, GaSb/InAs/GaSb structures were grown for electron mobility tests, obtaining (unintentional) 2D electron gas densities in the order of 9/5x10e12 cm(e-2) and mobilities up to 1.2/1.8x10e4 cm(e2)/Vs at room and liquid nitrogen temperature respectively. We show that it is beneficial to have some hydrogen in the carrier gas mixture for GaSb growth to achieve good crystal quality, morphology and electrical properties. Furthermore, an unexpected and previously unreported decomposition process of GaSb is observed at relatively low growth temperatures under the supply of the precursors for InAs epitaxial overgrowth. This nevertheless gets suppressed at even lower growth temperatures.
The cross-plane thermal conductivity of a type II InAs/GaSb superlattice (T2SL) is measured from 13 K to 300 K using the 3{omega} method. Thermal conductivity is reduced by up to 2 orders of magnitude relative to the GaSb bulk substrate. The low ther
mal conductivity of around 1-8 W/mcdotK may serve as an advantage for thermoelectric applications at low temperatures, while presenting a challenge for T2SL quantum cascade lasers and high power light emitting diodes. We introduce a power-law approximation to model non-linearities in the thermal conductivity, resulting in increased or decreased peak temperature for negative or positive exponents, respectively.
Temperature dependent structural phase transitions of SrRuO3 thin films epitaxially grown on SrTiO3(001) single crystal substrates have been studied using high-resolution x-ray diffraction. In contrast to bulk SrRuO3, coherently strained epitaxial la
yers do not display cubic symmetry up to ~730 oC and remain tetragonal. Such behavior is believed to be induced by compressive strain between the SrRuO3 layer and SrTiO3 substrate due to lattice mismatch. The tetragonal symmetry during growth explains the single domain growth on miscut SrTiO3 substrates with step edges running along the [100] or [010] direction.
Electron-hole hybridization in InAs/GaSb double quantum well structures leads to the formation of a mini band gap. We experimentally and theoretically studied the impact of strain on the transport properties of this material system. Thinned samples w
ere mounted to piezo electric elements to exert strain along the [011] and [001] crystal directions. When the Fermi energy is tuned through the mini gap, a dramatic impact on the resistivity at the charge neutrality point is found which depends on the amount of applied external strain. In the electron and hole regimes, strain influences the Landau level structure. By analyzing the intrinsic strain from the epitaxial growth, the external strain from the piezo elements and combining our experimental results with numerical simulations of strained and unstrained quantum wells, we compellingly illustrate why the InAs/GaSb material system is regularly found to be semimetallic.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
