اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدS-DIMM+ height characterization of day-time seeing using solar granulation
68
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
To evaluate site quality and to develop multi-conjugative adaptive optics systems for future large solar telescopes, characterization of contributions to seeing from heights up to at least 12 km above the telescope is needed. We describe a method for evaluating contributions to seeing from different layers along the line-of-sight to the Sun. The method is based on Shack Hartmann wavefront sensor data recorded over a large field-of-view with solar granulation and uses only measurements of differential image displacements from individual exposures, such that the measurements are not degraded by residual tip-tilt errors. We conclude that the proposed method allows good measurements when Frieds parameter r_0 is larger than about 7.5 cm for the ground layer and that these measurements should provide valuable information for site selection and multi-conjugate development for the future European Solar Telescope. A major limitation is the large field of view presently used for wavefront sensing, leading to uncomfortably large uncertainties in r_0 at 30 km distance.
قيم البحث
اقرأ أيضاً
We present a reanalysis of several years of DIMM data at the site of Dome C, Antarctica, to provide measurements of the coherence time $tau_0$. Statistics and seasonal behaviour of $tau_0$ are given at two heights above the ground, 3m and 8m, for the
wavelength $lambda=500$nm. We found an annual median value of $2.9$ms at the height of 8m. A few measurements could also be obtained at the height of 20m and give a median value of 6ms during the period June--September. For the first time, we provide measurements of $tau_0$ in daytime during the summer, which appears to show the same time dependence as the seeing with a sharp maximum at 5pm local time. Exceptional values of $tau_0$ above 10ms are met at this particular moment. The continuous slow variations of turbulence conditions during the day offers a natural test bed for a solar adaptive optics system.
Our knowledge of the Sun, its atmosphere, long term activity and space weather potential is severely limited by the lack of good observations of the polar and far-side regions. Observations from a polar vantage point would revolutionize our understan
ding of the mechanism of solar activity cycles, polar magnetic field reversals, the internal structure and dynamics of the Sun and its atmosphere. Only with extended (many day) observations of the polar regions can the polar flows be determined down to the tachocline where the dynamo is thought to originate. Rapid short period polar orbits, using in situ and remote sensing instrumentation, distributed over a small number of spacecraft, will provide continuous 360o coverage of the solar surface and atmosphere in both longitude and latitude for years on end. This unprecedented full coverage will enable breakthrough studies of the physical connection between the solar interior, the solar atmosphere, the solar wind, solar energetic particles and the inner heliosphere at large. A potential implementation, the Solar Polar Diamond Explorer (SPDEx) built upon the Solar Polar Imager mission design, involves up to four small spacecraft in a 0.48-AU orbit with an inclination of 75o. The orbit is achieved using solar sails or ion engines, both technologies already demonstrated in space.
This paper describes the development of X-ray diffractive optics for imaging solar flares with better than 0.1 arcsec angular resolution. X-ray images with this resolution of the geq10 MK plasma in solar active regions and solar flares would allow th
e cross-sectional area of magnetic loops to be resolved and the coronal flare energy release region itself to be probed. The objective of this work is to obtain X-ray images in the iron-line complex at 6.7 keV observed during solar flares with an angular resolution as fine as 0.1 arcsec - over an order of magnitude finer than is now possible. This line emission is from highly ionized iron atoms, primarily Fe xxv, in the hottest flare plasma at temperatures in excess of approx10 MK. It provides information on the flare morphology, the iron abundance, and the distribution of the hot plasma. Studying how this plasma is heated to such high temperatures in such short times during solar flares is of critical importance in understanding these powerful transient events, one of the major objectives of solar physics. We describe the design, fabrication, and testing of phase zone plate X-ray lenses with focal lengths of approx100 m at these energies that would be capable of achieving these objectives. We show how such lenses could be included on a two-spacecraft formation-flying mission with the lenses on the spacecraft closest to the Sun and an X-ray imaging array on the second spacecraft in the focal plane approx100 m away. High resolution X-ray images could be obtained when the two spacecraft are aligned with the region of interest on the Sun. Requirements and constraints for the control of the two spacecraft are discussed together with the overall feasibility of such a formation-flying mission.
This paper presents a detailed description of various subsystems of CALLISTO solar radio spectrograph installed at the USO/PRL. In the front-end system, a log periodic dipole antenna (LPDA) is designed for the frequency range of 40-900 MHz. In this p
aper LPDA design, its modifications, and simulation results are presented. We also present some initial observations taken by CALLISTO at Udaipur.
Seeing, the angular size of stellar images blurred by atmospheric turbulence, is a critical parameter used to assess the quality of astronomical sites. Median values at the best mid-latitude sites are generally in the range of 0.6--0.8,arcsec. Sites
on the Antarctic plateau are characterized by comparatively-weak turbulence in the free-atmosphere above a strong but thin boundary layer. The median seeing at Dome C is estimated to be 0.23--0.36 arcsec above a boundary layer that has a typical height of 30,m. At Dome A and F, the only previous seeing measurements were made during daytime. Here we report the first direct measurements of night-time seeing at Dome A, using a Differential Image Motion Monitor. Located at a height of just 8,m, it recorded seeing as low as 0.13,arcsec, and provided seeing statistics that are comparable to those for a 20,m height at Dome C. It indicates that the boundary layer was below 8,m 31% of the time. At such times the median seeing was 0.31,arcsec, consistent with free-atmosphere seeing. The seeing and boundary layer thickness are found to be strongly correlated with the near-surface temperature gradient. The correlation confirms a median thickness of approximately 14,m for the boundary layer at Dome A, as found from a sonic radar. The thinner boundary layer makes it less challenging to locate a telescope above it, thereby giving greater access to the free-atmosphere.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
