ترغب بنشر مسار تعليمي؟ اضغط هنا

Resonant tunnelling is a quantum mechanical process that has long been attracting both scientific and technological attention owing to its intriguing underlying physics and unique applications for high-speed electronics. The materials system exhibiti ng resonant tunnelling, however, has been largely limited to the conventional semiconductors, partially due to their excellent crystalline quality. Here we show that a deliberately designed transition metal oxide superlattice exhibits a resonant tunnelling behaviour with a clear negative differential resistance. The tunnelling occurred through an atomically thin, lanthanum {delta}-doped SrTiO3 layer, and the negative differential resistance was realized on top of the bipolar resistance switching typically observed for perovskite oxide junctions. This combined process resulted in an extremely large resistance ratio (~10^5) between the high and low-resistance states. The unprecedentedly large control found in atomically thin {delta}-doped oxide superlattices can open a door to novel oxide-based high-frequency logic devices.
We investigated the crystal and electronic structures of ferroelectric Bi4Ti3O12 (BiT) single crystalline thin films site-specifically substituted with LaCoO3 (LCO). The epitaxial films were grown by pulsed laser epitaxy on NdGaO3 and SrTiO3 substrat es to vary the degree of strain. With increasing the LCO substitution, we observed a systematic increase in the c-axis lattice constant of the Aurivillius phase related with the modification of pseudo-orthorhombic unit cells. These compositional and structural changes resulted in a systematic decrease in the band gap, i.e., the optical transition energy between the oxygen 2p and transition metal 3d states, based on a spectroscopic ellipsometry study. In particular, the Co 3d state seems to largely overlap with the Ti t2g state, decreasing the band gap. Interestingly, the applied tensile strain facilitates the band gap narrowing, demonstrating that epitaxial strain is a useful tool to tune the electronic structure of ferroelectric transition metal oxides.
Electrodynamic properties of La-doped SrTiO3 thin films with controlled elemental vacancies have been investigated using optical spectroscopy and thermopower measurement. In particular, we observed a correlation between the polaron formation and ther moelectric properties of the transition metal oxide (TMO) thin films. With decreasing oxygen partial pressure during the film growth (P(O2)), a systematic lattice expansion was observed along with the increased elemental vacancy and carrier density, experimentally determined using optical spectroscopy. Moreover, we observed an absorption in the mid-infrared photon energy range, which is attributed to the polaron formation in the doped SrTiO3 system. Thermopower of the La-doped SrTiO3 thin films could be largely modulated from -120 to -260 {mu}V K-1, reflecting an enhanced polaronic mass of ~3 < mpolron/m < ~4. The elemental vacancies generated in the TMO films grown at various P(O2) influences the global polaronic transport, which governs the charge transport behavior, including the thermoelectric properties.
Manipulating the orbital state in a strongly correlated electron system is of fundamental and technological importance for exploring and developing novel electronic phases. Here, we report an unambiguous demonstration of orbital occupancy control bet ween t2g and eg multiplets in quasi-twodimensional transition metal oxide superlattices (SLs) composed of a Mott insulator LaCoO3 and a band insulator LaAlO3. As the LaCoO3 sublayer thickness approaches its fundamental limit (i.e. one unit-cell-thick), the electronic state of the SLs changed from a Mott insulator, in which both t2g and eg orbitals are partially filled, to a band insulator by completely filling (emptying) the t2g (eg) orbitals. We found the reduction of dimensionality has a profound effect on the electronic structure evolution, which is, whereas, insensitive to the epitaxial strain. The remarkable orbital controllability shown here offers a promising pathway for novel applications such as catalysis and photovoltaics, where the energy of d level is an essential parameter.
We have investigated two-dimensional thermoelectric properties in transition metal oxide heterostructures. In particular, we adopted an unprecedented approach to direct tuning of the 2D carrier density using fractionally {delta}-doped oxide superlatt ices. By artificially controlling the carrier density in the 2D electron gas that emerges at a LaxSr1-xTiO3 {delta}-doped layer, we demonstrate that a thermopower as large as 408 {mu}V K-1 can be reached. This approach also yielded a power factor of the 2D carriers 117 {mu}Wcm-1K-2, which is one of the largest reported values from transition metal oxide based materials. The promising result can be attributed to the anisotropic band structure in the 2D system, indicating that {delta}-doped oxide superlattices can be a good candidate for advanced thermoelectrics.
The ferroelectric (FE) control of electronic transport is one of the emerging technologies in oxide heterostructures. Many previous studies in FE tunnel junctions (FTJs) exploited solely the differences in the electrostatic potential across the FTJs that are induced by changes in the FE polarization direction. Here, we show that in practice the junction current ratios between the two polarization states can be further enhanced by the electrostatic modification in the correlated electron oxide electrodes, and that FTJs with nanometer thin layers can effectively produce a considerably large electroresistance ratio at room temperature. To understand these surprising results, we employed an additional control parameter, which is related to the crossing of electronic and magnetic phase boundaries of the correlated electron oxide. The FE-induced phase modulation at the heterointerface ultimately results in an enhanced electroresistance effect. Our study highlights that the strong coupling between degrees of freedom across heterointerfaces could yield versatile and novel applications in oxide electronics.
Fast, reversible redox reactions in solids at low temperatures without thermomechanical degradation are a promising strategy for enhancing the overall performance and lifetime of many energy materials and devices. However, the robust nature of the ca tions oxidation state and the high thermodynamic barrier have hindered the realization of fast catalysis and bulk diffusion at low temperatures. Here, we report a significant lowering of the redox temperature by epitaxial stabilization of strontium cobaltites (SrCoOx) grown directly as one of two distinct crystalline phases, either the perovskite SrCoO3-{delta} or the brownmillerite SrCoO2.5. Importantly, these two phases can be reversibly switched at a remarkably reduced temperature (200~300 {deg}C) in a considerably short time (< 1 min) without destroying the parent framework. The fast, low temperature redox activity in SrCoO3-{delta} is attributed to a small Gibbs free energy difference between two topotatic phases. Our findings thus provide useful information for developing highly sensitive electrochemical sensors and low temperature cathode materials.
Using real-time spectroscopic ellipsometry, we directly observed a reversible lattice and electronic structure evolution in SrCoOx (x = 2.5 - 3) epitaxial thin films. Drastically different electronic ground states, which are extremely susceptible to the oxygen content x, are found in the two topotactic phases, i.e. the brownmillerite SrCoO2.5 and the perovskite SrCoO3. First principles calculations confirmed substantial differences in the electronic structure, including a metal-insulator transition, which originates from the modification in the Co valence states and crystallographic structures. More interestingly, the two phases can be reversibly controlled by changing the ambient pressure at greatly reduced temperatures. Our finding provides an important pathway to understanding the novel oxygen-content-dependent phase transition uniquely found in multivalent transition metal oxides.
Advances in synthesis techniques and materials understanding have given rise to oxide heterostructures with intriguing physical phenomena that cannot be found in their constituents. In these structures, precise control of interface quality, including oxygen stoichiometry, is critical for unambiguous tailoring of the interfacial properties, with deposition of the first monolayer being the most important step in shaping a well-defined functional interface. Here, we studied interface formation and strain evolution during the initial growth of LaAlO3 on SrTiO3 by pulsed laser deposition, in search of a means for controlling the atomic-sharpness of the interfaces. Our experimental results show that growth of LaAlO3 at a high oxygen pressure dramatically enhances interface abruptness. As a consequence, the critical thickness for strain relaxation was increased, facilitating coherent epitaxy of perovskite oxides. This provides a clear understanding of the role of oxygen pressure during the interface formation, and enables the synthesis of oxide heterostructures with chemically-sharper interfaces.
A 2D electron gas system in an oxide heterostructure serves as an important playground for novel phenomena. Here, we show that, by using fractional delta-doping to control the interfaces composition in LaxSr1-xTiO3/SrTiO3 artificial oxide superlattic es, the filling-controlled 2D insulator-metal transition can be realized. The atomic-scale control of d-electron band filling, which in turn contributes to the tuning of effective mass and density of the charge carriers, is found to be a fascinating route to substantially enhanced carrier mobilities.
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا