A compact HTS cable that is able to carry large current density is crucial for developing high field accelerator magnets. We are reporting a novel HTS cable (named X-cable) that could achieve a high current density as the Roebel cable, but is impleme
nted by in-plane bending stacked HTS tapes directly to realize the transposition. The cable is jointly developed with an industrial company on a production line: ready for large scale production from the beginning. Recently, a prototype cable with REBCO coated conductor has been successfully fabricated. Test results show no significant degradation, demonstrated the feasibility of such cable concept. In this paper, the cables design concept, in-plane bending performance of the REBCO tapes, fabrication procedure and test results of this first prototype cable will be presented.
Protecting a high temperature superconducting (HTS) magnet from a quench event is a challenging task. Because of the slow normal zone propagation velocity, the long reliable quench detection method by directly monitoring coil voltage may not be timel
y for HTS anymore, leaving HTS magnets under danger of overheating. Using a NbTi low temperature superconducting (LTS) wire to detect quench in coils wound with ReBCO HTS tapes have recently been experimentally proved, yet a theoretical study is still needed to further develop this technique and make it prepared to be applied more generally in high field magnets. In this manuscript, we have demonstrated that it is the significant difference in the temperature dependence of critical current between LTS and HTS but not the normal zone propagation velocity (NZPV), that makes LTSs good quench detectors. Simulations show that LTS quench detectors should have low matrix fraction or high matrix resistivity. At last, at field up to 15 T or 20 T, Nb3Sn is proven to be a good quench detector.
