We demonstrate magnetometry by detection of the spin state of high-density nitrogen-vacancy ensembles in diamond using optical absorption at 1042 nm. With this technique, measurement contrast, and collection efficiency can approach unity, leading to
an increase in magnetic sensitivity compared to the more common method of collecting red fluorescence. Working at 75 K with a sensor with effective volume $50 times 50 times 300$ microns^3, we project photon shot-noise limited sensitivity of 5 pT in one second of acquisition and bandwidth from dc to a few megahertz. Operation in a gradiometer configuration yields a noise floor of 7 nTrms at ~110 Hz in one second of acquisition.
We report measurements of the optical properties of the 1042 nm transition of negatively-charged Nitrogen-Vacancy (NV) centers in type 1b diamond. The results indicate that the upper level of this transition couples to the m_s=+/-1 sublevels of the {
^3}E excited state and is short-lived, with a lifetime <~ 1 ns. The lower level is shown to have a temperature-dependent lifetime of 462(10) ns at 4.4 K and 219(3) ns at 295 K. The light-polarization dependence of 1042 nm absorption confirms that the transition is between orbitals of A_1 and E character. The results shed new light on the NV level structure and optical pumping mechanism.
Nitrogen-vacancy (NV) centers in millimeter-scale diamond samples were produced by irradiation and subsequent annealing under varied conditions. The optical and spin relaxation properties of these samples were characterized using confocal microscopy,
visible and infrared absorption, and optically detected magnetic resonance. The sample with the highest NV- concentration, approximately 16 ppm = 2.8 x 10^{18} cm^{-3}, was prepared with no observable traces of neutrally-charged vacancy defects. The effective transverse spin relaxation time for this sample was T2* = 118(48) ns, predominately limited by residual paramagnetic nitrogen which was determined to have a concentration of 52(7) ppm. Under ideal conditions, the shot-noise limited sensitivity is projected to be ~150 fT/sqrt{Hz} for a 100 micron-scale magnetometer based on this sample. Other samples with NV- concentrations from .007 to 12 ppm and effective relaxation times ranging from 27 to 291 ns were prepared and characterized.
