Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA MUSE view of the asymmetric jet from HD 163296
96
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Jets and outflows are thought to play important roles in regulating star formation and disk evolution. HD 163296 is a well-studied Herbig Ae star that hosts proto-planet candidates, a protoplanetary disk, a protostellar jet, and a molecular outflow, which makes it an excellent laboratory for studying jets. We aim to characterize the jet at the inner regions and check if there are large differences with the features at large separations. A secondary objective is to demonstrate the performance of Multi Unit Spectroscopic Explorer (MUSE) in high-contrast imaging of extended line emission. MUSE in the narrow field mode (NFM) can provide observations at optical wavelengths with high spatial ($sim$75 mas) and medium spectral ($Rsim$2500) resolution. With the high-resolution spectral differential imaging (HRSDI) technique, we can characterize the kinematic structures and physical conditions of jets down to 100 mas. We detect multiple atomic lines in two new knots, B3 and A4, at distances of <4 from the host star with MUSE. The derived $dot{M}_{rm jet} / dot{M}_{rm acc}$ is about 0.08 and 0.06 for knots B3 and A4, respectively. The observed [Ca II]/[S II] ratios indicate that there is no sign of dust grains at distances of <4. Assuming the knot A4 traces the streamline, we set an upper limit of 2.2 au on the size of the launching region. Although MUSE has the ability to detect the velocity shifts caused by high- and low-velocity components, we found no significant evidence of velocity decrease transverse to the jet direction. Our work demonstrates the capability of using MUSE NFM observations for the detailed study of stellar jets in the optical down to 100~mas. The derived $dot{M}_{rm jet} / dot{M}_{rm acc}$, no dust grain, and jet radius at the star support the magneto-centrifugal models as a launching mechanism for the jet.
rate research
Read More
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33pm 0.01$ au, the inclination is ${52^circ}^{+5^circ}_{-7^circ}$, and the position angle is $143^circ pm 3^circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $mu$m-sized grains. Refractory grains or large ($gtrsim 10 mu$m-sized) grains could be the origin for this emission.
To characterize the mechanisms of planet formation it is crucial to investigate the properties and evolution of protoplanetary disks around young stars, where the initial conditions for the growth of planets are set. Our goal is to study grain growth in the disk of the young, intermediate mass star HD163296 where dust processing has already been observed, and to look for evidence of growth by ice condensation across the CO snowline, already identified in this disk with ALMA. Under the hypothesis of optically thin emission we compare images at different wavelengths from ALMA and VLA to measure the opacity spectral index across the disk and thus the maximum grain size. We also use a Bayesian tool based on a two-layer disk model to fit the observations and constrain the dust surface density. The measurements of the opacity spectral index indicate the presence of large grains and pebbles ($geq$1 cm) in the inner regions of the disk (inside $sim$50 AU) and smaller grains, consistent with ISM sizes, in the outer disk (beyond 150 AU). Re-analysing ALMA Band 7 Science Verification data we find (radially) unresolved excess continuum emission centered near the location of the CO snowline at $sim$90 AU. Our analysis suggests a grain size distribution consistent with an enhanced production of large grains at the CO snowline and consequent transport to the inner regions. Our results combined with the excess in infrared scattered light found by Garufi et al. (2014) suggests the presence of a structure at 90~AU involving the whole vertical extent of the disk. This could be evidence for small scale processing of dust at the CO snowline.
We introduce a new stacking method in Keplerian disks that (1) enhances signal-to-noise ratios (S/N) of detected molecular lines and (2) that makes visible otherwise undetectable weak lines. Our technique takes advantage of the Keplerian rotational velocity pattern. It aligns spectra according to their different centroid velocities at their different positions in a disk and stacks them. After aligning, the signals are accumulated in a narrower velocity range as compared to the original line width without alignment. Moreover, originally correlated noise becomes de-correlated. Stacked and aligned spectra, thus, have a higher S/N. We apply our method to ALMA archival data of DCN (3-2), DCO+ (3-2), N2D+ (3-2), and H2CO (3_0,3-2_0,2), (3_2,2-2_2,1), and (3_2,1-2_2,0) in the protoplanetary disk around HD 163296. As a result, (1) the S/N of the originally detected DCN (3-2), DCO+ (3-2), and H2CO (3_0,3-2_0,2) and N2D+ (3-2) lines are boosted by a factor of >4-5 at their spectral peaks, implying one order of magnitude shorter integration times to reach the original S/N; and (2) the previously undetectable spectra of the H2CO (3_2,2-2_2,1) and (3_2,1-2_2,0) lines are materialized at more than 3 sigma. These dramatically enhanced S/N allow us to measure intensity distributions in all lines with high significance. The principle of our method can not only be applied to Keplerian disks but also to any systems with ordered kinematic patterns.
We report Submillimeter Array (SMA) observations of CO (J=2--1, 3--2 and 6--5) and its isotopologues (13CO J=2--1, C18O J=2--1 and C17O J=3--2) in the disk around the Herbig Ae star HD 163296 at ~2 (250 AU) resolution, and interpret these data in the framework of a model that constrains the radial and vertical location of the line emission regions. First, we develop a physically self-consistent accretion disk model with an exponentially tapered edge that matches the spectral energy distribution and spatially resolved millimeter dust continuum emission. Then, we refine the vertical structure of the model using wide range of excitation conditions sampled by the CO lines, in particular the rarely observed J=6--5 transition. By fitting 13CO data in this structure, we further constrain the vertical distribution of CO to lie between a lower boundary below which CO freezes out onto dust grains (T ~ 19 K) and an upper boundary above which CO can be photodissociated (the hydrogen column density from the disk surface is ~ 10^{21} cm-2). The freeze-out at 19 K leads to a significant drop in the gas-phase CO column density beyond a radius of ~155 AU, a CO snow line that we directly resolve. By fitting the abundances of all CO isotopologues, we derive isotopic ratios of 12C/13C, 16O/18O and 18O/17O that are consistent with quiescent interstellar gas-phase values. This detailed model of the HD 163296 disk demonstrates the potential of a staged, parametric technique for constructing unified gas and dust structure models and constraining the distribution of molecular abundances using resolved multi-transition, multi-isotope observations.
Spatially resolved continuum observations of planet-forming disks show prominent ring and gap structures in their dust distribution. However, the picture from gas observations is much less clear and constraints on the radial gas density structure (i.e. gas gaps) remain rare and uncertain. We want to investigate the importance of thermo-chemical processes for the interpretation of high-spatial-resolution gas observations of planet-forming disks and their impact on derived gas properties. We apply the radiation thermo-chemical disk code ProDiMo (PROtoplanetary DIsk MOdel) to model self-consistently the dust and gas disk of HD 163296, using the DSHARP gas and dust observations. With this model we investigate the impact of dust gaps and gas gaps, considering chemistry and heating/cooling processes, on the observables and the derived gas properties. We find distinct peaks in the radial line intensity profiles of the CO line data of HD 163296 at the location of the dust gaps. Our model indicates that those peaks are not only a consequence of a gas temperature increase within the gaps but are mainly caused by the absorption of line emission from the back side of the disk by the dust rings. For two of the three prominent dust gaps in HD 163296, we find that thermo-chemical effects are negligible for deriving density gradients via measurements of the rotation velocity. However, for the gap with the highest dust depletion, the temperature gradient can be dominant and needs to be considered to derive accurate gas density profiles. Self-consistent gas and dust thermo-chemical modelling in combination with high-quality observations of multiple molecules are necessary to accurately derive gas gap depths and shapes. This is crucial to determine the origin of gaps and rings in planet-forming disks and to improve the mass estimates of forming planets if they are the cause of the gap.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
