Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGiant Thermal Conductivity Enhancement in Multilayer MoS2 under Highly Compressive Strain
414
0
0.0
(
0
)
Authors
Xianghai Meng
Ask ChatGPT about the research
No Arabic abstract
Multilayer MoS2 possesses highly anisotropic thermal conductivities along in-plane and cross-plane directions that could hamper heat dissipation in electronics. With about 9% cross-plane compressive strain created by hydrostatic pressure in a diamond anvil cell, we observed about 12 times increase in the cross-plane thermal conductivity of multilayer MoS2. Our experimental and theoretical studies reveal that this drastic change arises from the greatly strengthened interlayer interaction and heavily modified phonon dispersions along cross-plane direction, with negligible contribution from electronic thermal conductivity, despite its enhancement of 4 orders of magnitude. The anisotropic thermal conductivity in the multilayer MoS2 at ambient environment becomes almost isotropic under highly compressive strain, effectively transitioning from 2D to 3D heat dissipation. This strain tuning approach also makes possible parallel tuning of structural, thermal and electrical properties, and can be extended to the whole family of 2D Van der Waals solids, down to two layer systems.
rate research
Read More
Thermal switching provides an effective way for active heat flow control, which has recently attracted increasing attention in terms of nanoscale thermal management technologies. In magnetic and spintronic materials, the thermal conductivity depends on the magnetization configuration: this is the magneto-thermal resistance effect. Here we show that an epitaxial Cu/Co$_{50}$Fe$_{50}$ multilayer film exhibits giant magnetic-field-induced modulation of the cross-plane thermal conductivity. The magneto-thermal resistance ratio for the Cu/Co$_{50}$Fe$_{50}$ multilayer reaches 150% at room temperature, which is much larger than the previous record high. Although the ratio decreases with increasing the temperature, the giant magneto-thermal resistance effect of ~100% still appears up to 400 K. The magnetic field dependence of the thermal conductivity of the Cu/Co$_{50}$Fe$_{50}$ multilayer was observed to be about twice greater than that of the cross-plane electrical conductivity. The observation of the giant magneto-thermal resistance effect clarifies a potential of spintronic multilayers as thermal switching devices.
We report a technique for transferring large areas of the CVD-grown, few-layer MoS2 from the original substrate to another arbitrary substrate and onto holey substrates, in order to obtain free-standing structures. The method consists of a polymer- and residue-free, surface-tension-assisted wet transfer, in which we take advantage of the hydrophobic properties of the MoS2. The methods yields better quality transferred layers, with fewer cracks and defects, and less contamination than the widely used PMMA-mediated transfer and allows fabrication of few-layer, fee-standing structures with diameters up to 100 micro-m. We report thermal conductivity measurements by means of contactless Raman thermometry on the so-fabricated samples. The measurements revealed a strong reduction in the in-plane thermal conductivity down to 0.5 W/mK. The results are explained using finite elements method simulations for a polycrystalline film.
Controllable doping of two-dimensional materials is highly desired for ideal device performance in both hetero- and p-n homo-junctions. Herein, we propose an effective strategy for doping of MoS2 with nitrogen through a remote N2 plasma surface treatment. By monitoring the surface chemistry of MoS2 upon N2 plasma exposure using in-situ X-ray photoelectron spectroscopy, we identified the presence of covalently bonded nitrogen in MoS2, where substitution of the chalcogen sulfur by nitrogen is determined as the doping mechanism. Furthermore, the electrical characterization demonstrates that p-type doping of MoS2 is achieved by nitrogen doping, in agreement with theoretical predictions. Notably, we found that the presence of nitrogen can induce compressive strain in the MoS2 structure, which represents the first evidence of strain induced by substitutional doping in a transition metal dichalcogenide material. Finally, our first principle calculations support the experimental demonstration of such strain, and a correlation between nitrogen doping concentration and compressive strain in MoS2 is elucidated.
We report electrical characterization of monolayer molybdenum disulfide (MoS2) devices using a thin layer of polymer electrolyte consisting of poly(ethylene oxide) (PEO) and lithium perchlorate (LiClO4) as both a contact-barrier reducer and channel mobility booster. We find that bare MoS2 devices (without polymer electrolyte) fabricated on Si/SiO2 have low channel mobility and large contact resistance, both of which severely limit the field-effect mobility of the devices. A thin layer of PEO/ LiClO4 deposited on top of the devices not only substantially reduces the contact resistance but also boost the channel mobility, leading up to three-orders-of-magnitude enhancement of the field-effect mobility of the device. When the polymer electrolyte is used as a gate medium, the MoS2 field-effect transistors exhibit excellent device characteristics such as a near ideal subthreshold swing and an on/off ratio of 106 as a result of the strong gate-channel coupling.
Elemental 2D materials exhibit intriguing heat transport and phononic properties. Here we have investigated the lattice thermal conductivity of newly proposed arsenene, the 2D honeycomb structure of arsenic, using {it ab initio} calculations. Solving the Boltzmann transport equation for phonons, we predict a highly anisotropic thermal conductivity, of $30.4$ and $7.8$ W/mK along the zigzag and armchair directions, respectively at room temperature. Our calculations reveal that phonons with mean free paths between $20$ nm and $1$ $mu$m provide the main contribution to the large thermal conductivity in the zig-zag direction, mean free paths of phonons contributing to heat transport in the armchair directions range between $20$ and $100$ nm. The obtained low and anisotropic thermal conductivity, and feasibility of synthesis, in addition to other reports on high electron mobility, make arsenene a promising material for a variety of applications, including thermal management and thermoelectric devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
