Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA Fast Response Mission to Rendezvous with an Interstellar Object
404
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A solar sail propelled small satellite mission concept to intercept and potentially rendezvous with newly discovered Interstellar Objects (ISOs) is described. The mission concept derives from the proposal for a technology demonstration mission (TDM) for exiting the solar system at high velocity, eventually to reach the focal region of the solar gravitational lens (SGL). The ISO mission concept is to fly a solar sail inward toward a holding orbit around the Sun and when the ISO orbit is confirmed, target the sailcraft to reach an escape velocity of over 6, AU/year. This would permit rapid response to a new ISO discovery and an intercept within 10 AU from the Sun. Two new proven interplanetary technologies are utilized to enable such a mission: i) interplanetary Smallsats, such as those demonstrated by the MarCO mission, and ii) solar sails, such as demonstrated by LightSail and IKAROS missions and developed for NEA Scout and Solar Cruiser missions. Current technology work suggests such a mission could fly and reach an ISO moving through the solar system within this decade. Such a mission might enable the first encounter with an ISO to allow for imaging and spectroscopy, measurements of size and mass, potentially giving a unique information about the objects origin and composition.
rate research
Read More
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back to Earth with samples from Ryugu with no critical issues after the successful departure in November 2019. Here, we propose an extended mission in which the spacecraft will rendezvous with a small asteroid with ~30 m - ~40 m in diameter that is rotating at a spin period of ~10 min after an additional ~10-year cruise phase. We introduce that two scenarios are suitable for the extended mission. In the first scenario, the spacecraft will perform swing-by maneuvers at Venus once and Earth twice to arrive at asteroid 2001 AV43. In the second scenario, it will perform swing-by maneuvers at Earth twice to reach asteroid 1998 KY26. In both scenarios, the mission will continue until the early 2030s. JAXA recently released the decision that the spacecraft will rendezvous with 1998 KY26. This paper focuses on our scientific assessments of the two scenarios but leaves the decision process to go to 1998 KY26 for future reports. Rendezvous operations will be planned to detail the physical properties and surrounding environments of the target, one of the smallest elements of small planetary bodies. By achieving the planned operations, the mission will provide critical hints on the violent histories of collisions and accumulations of small bodies in the solar system. Furthermore, the established scientific knowledge and techniques will advance key technologies for planetary defense.
The solar photon pressure provides a viable source of thrust for spacecraft in the solar system. Theoretically it could also enable interstellar missions, but an extremely small mass per cross section area is required to overcome the solar gravity. We identify aerographite, a synthetic carbon-based foam with a density of 0.18 kg/m^3 (15,000 times more lightweight than aluminum) as a versatile material for highly efficient propulsion with sunlight. A hollow aerographite sphere with a shell thickness eps_shl = 1 mm could go interstellar upon submission to the solar radiation in interplanetary space. Upon launch at 1 AU from the Sun, an aerographite shell with eps_shl = 0.5 mm arrives at the orbit of Mars in 60 d and at Plutos orbit in 4.3 yr. Release of an aerographite hollow sphere, whose shell is 1 micrometer thick, at 0.04 AU (the closest approach of the Parker Solar Probe) results in an escape speed of nearly 6900 km/s and 185 yr of travel to the distance of our nearest star, Proxima Centauri. The infrared signature of a meter-sized aerographite sail could be observed with JWST up to 2 AU from the Sun, beyond the orbit of Mars. An aerographite hollow sphere with eps_shl = 100 micrometer and a radius of 1 m (5 m) weighs 230 mg (5.7 g) and has a 2.2 g (55 g) mass margin for interstellar escape. The payload margin is ten times the mass of the spacecraft, whereas the payload on chemical interstellar rockets is typically a thousandth of the weight of the rocket. Simplistic communication would enable studies of the interplanetary medium and a search for the suspected Planet Nine, and would serve as a precursor mission to alpha Centauri. We estimate prototype developments costs of 1 million USD, a price of 1000 USD per sail, and a total of <10 million USD including launch for a piggyback concept with an interplanetary mission.
Missing data are a common problem in experimental and observational physics. They can be caused by various sources, either an instruments saturation, or a contamination from an external event, or a data loss. In particular, they can have a disastrous effect when one is seeking to characterize a colored-noise-dominated signal in Fourier space, since they create a spectral leakage that can artificially increase the noise. It is therefore important to either take them into account or to correct for them prior to e.g. a Least-Square fit of the signal to be characterized. In this paper, we present an application of the {it inpainting} algorithm to mock MICROSCOPE data; {it inpainting} is based on a sparsity assumption, and has already been used in various astrophysical contexts; MICROSCOPE is a French Space Agency mission, whose launch is expected in 2016, that aims to test the Weak Equivalence Principle down to the $10^{-15}$ level. We then explore the {it inpainting} dependence on the number of gaps and the total fraction of missing values. We show that, in a worst-case scenario, after reconstructing missing values with {it inpainting}, a Least-Square fit may allow us to significantly measure a $1.1times10^{-15}$ Equivalence Principle violation signal, which is sufficiently close to the MICROSCOPE requirements to implement {it inpainting} in the official MICROSCOPE data processing and analysis pipeline. Together with the previously published KARMA method, {it inpainting} will then allow us to independently characterize and cross-check an Equivalence Principle violation signal detection down to the $10^{-15}$ level.
The solar gravitational lens (SGL) provides a factor of $10^{11}$ amplification for viewing distant point sources beyond our solar system. As such, it may be used for resolved imaging of extended sources, such as exoplanets, not possible otherwise. To use the SGL, a spacecraft carrying a modest telescope and a coronagraph must reach the SGLs focal region, that begins at $sim$550 astronomical units (AU) from the Sun and is oriented outward along the line connecting the distant object and the Sun. No spacecraft has ever reached even a half of that distance; and to do so within a reasonable mission lifetime (e.g., less than 25 years) and affordable cost requires a new type of mission design, using solar sails and microsats ($<100$~kg). The payoff is high -- using the SGL is the only practical way we can ever get a high-resolution, multi-pixel image of an Earth-like exoplanet, one that we identify as potentially habitable. This paper describes a novel mission design starting with a rideshare launch from the Earth, spiraling in toward the Sun, and then flying around it to achieve solar system exit speeds of over $20$ AU/year. A new sailcraft design is used to make possible high area to mass ratio for the sailcraft. The mission design enables other fast solar system missions, starting with a proposed very low cost technology demonstration mission (TDM) to prove the functionality and operation of the microsat-solar sail design and then, building on the TDM, missions to explore distant regions of the solar system, and those to study Kuiper Belt objects (KBOs) and the recently discovered interstellar objects (ISOs) are also possible.
The goal of Project GAUSS is to return samples from the dwarf planet Ceres. Ceres is the most accessible ocean world candidate and the largest reservoir of water in the inner solar system. It shows active cryovolcanism and hydrothermal activities in recent history that resulted in minerals not found in any other planets to date except for Earths upper crust. The possible occurrence of recent subsurface ocean on Ceres and the complex geochemistry suggest possible past habitability and even the potential for ongoing habitability. Aiming to answer a broad spectrum of questions about the origin and evolution of Ceres and its potential habitability, GAUSS will return samples from this possible ocean world for the first time. The project will address the following top-level scientific questions: 1) What is the origin of Ceres and the origin and transfer of water and other volatiles in the inner solar system? 2) What are the physical properties and internal structure of Ceres? What do they tell us about the evolutionary and aqueous alteration history of icy dwarf planets? 3) What are the astrobiological implications of Ceres? Was it habitable in the past and is it still today? 4) What are the mineralogical connections between Ceres and our current collections of primitive meteorites? GAUSS will first perform a high-resolution global remote sensing investigation, characterizing the geophysical and geochemical properties of Ceres. Candidate sampling sites will then be identified, and observation campaigns will be run for an in-depth assessment of the candidate sites. Once the sampling site is selected, a lander will be deployed on the surface to collect samples and return them to Earth in cryogenic conditions that preserves the volatile and organic composition as well as the original physical status as much as possible.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
