Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThermal conductivity of benzothieno-benzothiophene derivatives at the nanoscale
85
0
0.0
(
0
)
Added by
Dominique Vuillaume
Publication date
2021
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We study by scanning thermal microscopy the nanoscale thermal conductance of films (40 to 400 nm thick) of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). We demonstrate that the out-of-plane thermal conductivity is significant along the interlayer direction, larger for BTBT (0.63 +/- 0.12 W m-1 K-1) compared to C8-BTBT-C8 (0.25 +/- 0.13 W m-1 K-1). These results are supported by molecular dynamics calculations (Approach to Equilibrium Molecular Dynamics method) performed on the corresponding molecular crystals. The calculations point to significant thermal conductivity (3D-like) values along the 3 crystalline directions, with anisotropy factors between the crystalline directions below 1.8 for BTBT and below 2.8 for C8-BTBT-C8, in deep contrast with the charge transport properties featuring a two-dimensional character for these materials. In agreement with the experiments, the calculations yield larger values in BTBT compared to C8-BTBT-C8 (0.6-1.3 W m-1 K-1 versus 0.3-0.7 W m-1 K-1, respectively). The weak thickness dependence of the nanoscale thermal resistance is in agreement with a simple analytical model.
rate research
Read More
The reduction of the thermal conductivity in nanostructures opens up the possibility of exploiting for thermoelectric purposes also materials such as silicon, which are cheap, available and sustainable but with a high thermal conductivity in their bulk form. The development of thermoelectric devices based on these innovative materials requires reliable techniques for the measurement of thermal conductivity on a nanometric scale. The approximations introduced by conventional techniques for thermal conductivity measurements can lead to unreliable results when applied to nanostructures, because heaters and temperature sensors needed for the measurement cannot have a negligible size, and therefore perturb the result. In this paper we focus on the 3$omega$ technique, applied to the thermal conductivity measurement of suspended silicon nanomembranes. To overcome the approximations introduced by conventional analytical models used for the interpretation of the 3$omega$ data, we propose to use a numerical solution, performed by means of finite element modeling, of the thermal and electrical transport equations. An excellent fit of the experimental data will be presented, discussed, and compared with an analytical model.
We analyze the benefits and shortcomings of a thermal control in nanoscale electronic conductors by means of the contact heating scheme. Ideally, this straightforward approach allows one to apply a known thermal bias across nanostructures directly through metallic leads, avoiding conventional substrate intermediation. We show, by using the average noise thermometry and local noise sensing technique in InAs nanowire based devices, that a nanoscale metallic constriction on a SiO2 substrate acts like a diffusive conductor with negligible electron-phonon relaxation and non-ideal leads. The non-universal impact of the leads on the achieved thermal bias -- which depends on their dimensions, shape and material composition -- is hard to minimize, but is possible to accurately calibrate in a properly designed nano-device. Our results allow to reduce the issue of the thermal bias calibration to the knowledge of the heater resistance and pave the way for accurate thermoelectric or similar measurements at the nanoscale.
Knowledge of the mean free path distribution of heat-carrying phonons is key to understanding phonon-mediated thermal transport. We demonstrate that thermal conductivity measurements of thin membranes spanning a wide thickness range can be used to characterize how bulk thermal conductivity is distributed over phonon mean free paths. A non-contact transient thermal grating technique was used to measure the thermal conductivity of suspended Si membranes ranging from 15 to 1500 nm in thickness. A decrease in the thermal conductivity from 74% to 13% of the bulk value is observed over this thickness range, which is attributed to diffuse phonon boundary scattering. Due to the well-defined relation between the membrane thickness and phonon mean free path suppression, combined with the range and accuracy of the measurements, we can reconstruct the bulk thermal conductivity accumulation vs. phonon mean free path, and compare with theoretical models.
We study the size dependence of thermal conductivity in nanoscale semiconducting systems. An analytical formula including the surface scattering and the size confinement effects of phonon transport is derived. The theoretical formula gives good agreements with the existing experimental data for Si and GaAs nanowires and thin films.
We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspended samples. The lowest value of thermal conductivity of 0.27 Wm-1K-1, which reaches a similar value as teflon, is obtained in a polycrystalline sample formed by a combination of horizontally and vertically oriented grains, with respect to the bulk (001) monocrystal. Analysis by means of molecular dynamics and finite element method simulations confirm that such grain arrangement leads to lower grain boundary conductance. We discuss the possible use of these thermal insulating films in the context of electronics and thermoelectricity.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
