Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGanymedes Surface Properties from Millimeter and Infrared Thermal Emission
68
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present thermal observations of Ganymede from the Atacama Large Millimeter Array (ALMA) in 2016-2019 at a spatial resolution of 300-900 km (0.1-0.2 angular resolution) and frequencies of 97.5, 233, and 343.5 GHz (wavelengths of 3, 1.3, and 0.87 mm); the observations collectively covered all Ganymede longitudes. We determine the global thermophysical properties using a thermal model that considers subsurface emission and depth- and temperature-dependent thermophysical and dielectric properties, in combination with a retrieval algorithm. The data are sensitive to emission from the upper $sim$0.5 meter of the surface, and we find a millimeter emissivity of 0.75-0.78 and (sub)surface porosities of 10-40%, corresponding to effective thermal inertias of 400-800 J m^{-2} K^{-1} s^{-1/2}. Combined with past infrared results, as well as modeling presented here of a previously-unpublished Galileo PPR nighttime infrared observation, the multi-wavelength constraints are consistent with a compaction profile whereby the porosity drops from ~85% at the surface to 10{+30/-10}% at depth over a compaction length scale of tens of cm. We present maps of temperature residuals from the best-fit global models which indicate localized variations in thermal surface properties at some (but not all) dark terrains and at impact craters, which appear 5-8 K colder than the model. Equatorial regions are warmer than predicted by the model, in particular near the centers of the leading and trailing hemispheres, while the mid-latitudes (~30-60 degrees) are generally colder than predicted; these trends are suggestive of an exogenic origin.
rate research
Read More
The sensitivity of ALMA makes it possible to detect thermal mm/submm emission from small/distant Solar System bodies at the sub-mJy level. Measured fluxes are primarily sensitive to the objects diameters, but deriving precise sizes is somewhat hampered by the uncertain effective emissivity at these wavelengths. Following Brown and Butler (2017) who presented ALMA data for four binary TNOs, we report ALMA 1.29 mm measurements of four Centaurs (2002 GZ$_{32}$, Bienor, Chiron, Chariklo) and two TNOs (Huya and Makemake), sampling a range of size, albedo and composition. These thermal fluxes are combined with mid/far-infrared fluxes to derive the relative emissivity at radio (mm/submm) wavelengths, using NEATM and thermophysical models. We reassess earlier thermal measurements of these and other objects -- including Pluto/Charon and Varuna -- exploring effects due to non-spherical shape and varying apparent pole orientation, and show that those can be key for reconciling previous diameter determinations and correctly estimating the spectral emissivities. We also evaluate the possible contribution to thermal fluxes of established (Chariklo) or claimed (Chiron) ring systems. As a general conclusion, all the objects, except Makemake, have radio emissivities significantly lower than unity. Although the emissivity values show diversity, we do not find any significant trend with physical parameters such as diameter, composition, beaming factor, albedo, or color, but we suggest that the emissivity could be correlated with grain size. The mean relative radio emissivity is found to be 0.70$pm$0.13, a value that we recommend for the analysis of further mm/submm data.
We observed Ceres at three epochs in 2015 November and 2017 September and October with ALMA 12-meter array and in 2017 October with the ALMA Compact Array (ACA), all at ~265 GHz continuum (wavelengths of ~1.1 mm) to map the temperatures of Ceres over a full rotation at each epoch. We also used 2017 October ACA observations to search for HCN. The disk-averaged brightness temperature of Ceres is measured to be between 170 K and 180 K during our 2017 observations. The rotational lightcurve of Ceres shows a double peaked shape with an amplitude of about 4%. Our HCN search returns a negative result with an upper limit production rate of ~2$times$10$^{24}$ molecules s$^{-1}$, assuming globally uniform production and a Haser model. A thermophysical model suggests that Ceress top layer has higher dielectric absorption than lunar-like materials at a wavelength of 1 mm. However, previous observations showed that the dielectric absorption of Ceres decreases towards longer wavelengths. Such distinct dielectric properties might be related to the hydrated phyllosilicate composition of Ceres and possibly abundant $mu$m-sized grains on its surface. The thermal inertia of Ceres is constrained by our modeling as likely being between 40 and 160 tiu, much higher than previous measurements at infrared wavelengths. Modeling also suggests that Ceress lightcurve is likely dominated by spatial variations in its physical or compositional properties that cause changes in Ceress observed thermal properties and dielectric absorption as it rotates.
The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroids surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, small fractions of the surface contribute the majority of thermally emitted flux. Calculating observed areas could enable the production of spatially-resolved thermal inertia maps from non-resolved observations of asteroids.
We present analyses of Spitzer observations of 29P/Schwassmann-Wachmann 1 using 16 $mu$m IRS blue peak-up (PU) and 24 $mu$m and 70 $mu$m MIPS images obtained on UT 2003 November 23 and 24 that characterize the Centaurs large-grain (10-100 $mu$m) dust coma during a time of non-outbursting quiescent activity. Estimates of $epsilon f rho$ for each band (16 $mu$m (2600 $pm$ 43 cm), 24 $mu$m (5800 $pm$ 63 cm), and 70 $mu$m (1800 $pm$ 900 cm)) follow the trend between nucleus size vs. $epsilon f rho$ that was observed for the WISE/NEOWISE comet ensemble. A coma model was used to derive a dust production rate in the range of 50-100 kg/s. For the first time, a color temperature map of SW1s coma was constructed using the 16 $mu$m and 24 $mu$m imaging data. With peaks at $sim$ 140K, this map implies that coma water ice grains should be slowly sublimating and producing water gas in the coma. We analyzed the persistent 24 $mu$m wing (a curved southwestern coma) feature at 352,000 km (90$$) from the nucleus attributed by Stansberry et al. (2004) to nucleus rotation and instead propose that it is largely created by solar radiation pressure and gravity acting on micron sized grains. We performed coma removal to the 16 $mu$m PU image in order to refine the nucleus emitted thermal flux. A new application of the Near Earth Asteroid Thermal Model (NEATM; Harris 1998) at five wavelengths (5.730 $mu$m, 7.873 $mu$m, 15.80 $mu$m, 23.68 $mu$m, and 71.42 $mu$m) was then used to refine SW1s effective radius measurement to $R = 32.3 pm 3.1$ km and infrared beaming parameter to $eta = 1.1 pm 0.2$, respectively.
We describe interferometric observations of the asteroid (41) Daphne in the thermal infrared obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer (VLTI). We derived the size and the surface thermal properties of (41) Daphne by means of a thermophysical model (TPM), which is used for the interpretation of interferometric data for the first time. From our TPM analysis, we derived a volume equivalent diameter for (41) Daphne of 189 km, using a non-convex 3-D shape model derived from optical lightcurves and adaptive optics images (B. Carry, private communication). On the other hand, when using the convex shape of Kaasalainen et al. (2002. Icarus 159, 369-395) in our TPM analysis, the resulting volume equivalent diameter of (41) Daphne is between 194 and 209 km, depending on the surface roughness. The shape of the asteroid is used as an a priori information in our TPM analysis. No attempt is made to adjust the shape to the data. Only the size of the asteroid and its thermal parameters (albedo, thermal inertia and roughness) are adjusted to the data. We estimated our model systematic uncertainty to be of 4% and of 7% on the determination of the asteroid volume equivalent diameter depending on whether the non-convex or the convex shape is used, respectively. In terms of thermal properties, we derived a value of the surface thermal inertia smaller than 50 J m-2 s-0.5 K-1 and preferably in the range between 0 and 30 J m-2 s-0.5 K-1. Our TPM analysis also shows that Daphne has a moderate macroscopic surface roughness.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
